The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
The AGM MP002C sniper rifle replica is an excellent choice for novice airsoft players looking to embark on their journey into this type of entertainment. This budget-friendly version of a sniper rifle is modeled after a popular designated marksman rifle used by special units worldwide. It operates on a "bolt action" principle, which means that after each shot, it requires manual cocking of the spring using the bolt handle, preparing the weapon for the next shot.
Scope and bipod NOT INCLUDED.
Please Choice separately from list below
3-9 x 40 Scope, FREE MOUNT. The Strike Systems Pro Optics scopes are perfect choices when you need both functionality and classic looks. The lenses are fully coated for sharp and bright clear images. |
SCOPE 3-9X40 WITH HIGH MOUNT RINGS
€49.95 €34.97 |
|
BIPOD Fit to AGM 002 APS2 L96 FOR SNIPER RIFLE |
Bipod for Sniper Rifle AGM 002 APS2 L96
€39.95 €27.97 |
|
Speedloader for Magazines Made from semi-transparent polymer. The tool allows for rapid and accurate loading of Mid / Low / Real-cap magazines and all kinds of gas grenades or mines. The speedloader has the shape of a pistol magazine so it can be easily stored inside a magazine pouch. The set also includes an adapter that makes it easier to fill sniper magazines. |
High Capacity BB speed Loader (100rds, 6mm pellets) black
€4.95 |
|
AGM L96 Series Low-Cap Magazine (MP002 - 22 Rounds) Injection molded polymer construction High tension steel spring ensures reliable feeding 22 round capacity Compatibility: AGM/Matrix/JG MP002 Type 96 Airsoft sniper rifles Capacity: 22 rounds Materials: Injection molded polymer Manufacturer: AGM |
AGM L96 Series Low-Cap Magazine (MP002 - 22 Rounds)
€3.95 |
|
|
Professional 0,23g BBs - 1kg (4300rds)
€11.95 |
|
Every replica requires regular maintenance. Silicon oil Smart Oil™ is ideal for that kind of activities. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
|
Smart Oil™ Silicon Oil – 100 ml
€5.95 |
The AGM MP002C sniper rifle replica is an excellent choice for novice airsoft players looking to embark on their journey into this type of entertainment. This budget-friendly version of a sniper rifle is modeled after a popular designated marksman rifle used by special units worldwide. It operates on a "bolt action" principle, which means that after each shot, it requires manual cocking of the spring using the bolt handle, preparing the weapon for the next shot.
Robust Construction: The replica is meticulously crafted from durable materials, primarily metal and polymer. This provides durability even in challenging terrain conditions while presenting an impressive appearance.
Mounting Rail: The rifle is equipped with a mounting rail, allowing you to attach a scope or other accessories. This provides players with enhanced precision and the ability to customize the weapon to their needs.
Bipod Mount: The replica features a bipod mount (bipod sold separately), enabling more stable weapon handling while aiming and shooting, particularly useful for precise long-range shots.
Spring-Powered: It operates on a spring mechanism, requiring manual cocking of the spring via the bolt handle before each shot.
Starter Kit: The package includes one magazine and a quick-loader for BBs.
The MP002C sniper rifle is an excellent choice for those who are just beginning their airsoft journey and prefer not to invest heavily from the outset. It is a sturdy and reliable replica that enables precise long-range shooting, allowing you to become a formidable sniper on the battlefield.
Weight: 3600
Muzzle velocity: ~328 fps
Material: ABS, aluminum
Color: Black
Length: 1120 mm
Muzzle energy: ~1 J
Length of internal barrel: 445 mm
Fire mode: single
Number of magazines in set: 1 pcs.
Every replica pass initial check up. It's being checked and overshooted on XCORTECH X3200 chronograph.
Black Texture ABS Body and Full Metal Receiver With Barrel, Muzzle Power reach ~320FPS Velocity (Air Cocking), Full Metal Magazine Accommodate 25+1 Rounds of 6mm Plastic Pellet. Scope and bipod NOT INCLUDED. Please Choice separately from list below
Historical Russian repeating airsoft gun rifle Mosin-Nagant model m1938 was manufactured by S&T Armament (Smart Team). It was a new gun introduced to the artillery, rear and auxiliary formations. It is recognizable because of the barrel shortened by 222mm. During World War II, it turned out that carbines were better suited as infantry weapons than...
The ST 200 was purposefully crafted to be an unparalleled force on the battlefield, excelling at extended ranges due to a new caliber .408. Its design revolves around empowering modern warfighters with the capability to unleash devastatingly accurate firepower over long distances. The ST 200's exceptional performance has catapulted it to the heights of...
The AGM MP002C sniper rifle replica is an excellent choice for novice airsoft players looking to embark on their journey into this type of entertainment. This budget-friendly version of a sniper rifle is modeled after a popular designated marksman rifle used by special units worldwide. It operates on a "bolt action" principle, which means that after each...
With pleasure, we present an authentic replica of the M1903A3 Springfield rifle, one of the most revered firearms in history. This 1:1 scale model produced by the renowned [S&T]) company impresses not only with its faithful reproduction of weight and texture of the original but also with outstanding craftsmanship. Please Note!!! Scope and scope mount...
S&T LEE ENFIELD SMLE NO. 1 MK III AIRSOFT RIFLE IN REAL WOOD This S&T reproduction is a fantastic replica of the famous SMLE, with a real wood stock, Iron Cylinder and almost full metal construction this rifle comes in at 3.5kg, that is less than 500grams lighter than the real rifle. S&T have decided to go with the slightly later square...
A replica of the US infantry primary rifle from World War II until the late 1950s, when the M14 and later the M16 rifle were introduced. Electric mechanism with a v7 gearbox compatible with Marui/CYMA parts, steel gears mounted on 6mm bearings and a quick spring change system. The buttstock is made of quality wood, and the elements such as barrel, gas...
Spring-powered replica of a American WWII bolt-action rifle with a trigger assembly, barrel and hop-up rubber in the VSR10 system, and a steel cylinder (22x201mm). The stock is made of high-quality real wood, and the elements such as barrel, bolt, receiver, sights, magazine housing, trigger and trigger guard are made of steel and aluminum. Set includes a...
WELL L96 Bolt Action Spring Rifle, Replica of Maruzen APS Type 96 Bolt Action Sniper Rifle, Full Metal Bolt System & Solid cocking motion sound, Soft Rubber Stock made it to be ultimate rifle for comfort & accuracy. Scope and bipod NOT INCLUDED. Please Choice separately from list below
The sniper rifle replica is made of metal and high quality plastic. The metal made elements are as follows: the minor elements and also the barrel, the bolt carrier, the cocking handle, the RIS rail and the trigger. Scope and bipod NOT INCLUDED. Please Choice separately from list below
The M82 Barrett is a semi-automatic anti-materiel rifle used by US Army since 1989 and used by many units and army around the world. It is also called M107 in US army, or «Light Fifty for it .50BMG caliber. The M82 has two variant, the original M82A1 / M82A3 and M82A2, the bullpup version of the M82 Barret Family. A .50 cal Under licence; The airsoft AEG...
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, Full Metal + Wood Stock
Black Texture ABS Body and Full Metal Receiver With Barrel. Power reach ~328FPS Velocity (Air Cocking), Magazine Accommodate 25+1 Rounds of 6mm Plastic Pellet, Airsoft WELL VSR-10 MB03 Bolt Action Spring Rifle Scope and bipod NOT INCLUDED. Please Choice separately from list below
The Kar98k rifle replica is made of polymer and metal. The barrel, slide, sights and sling swivels are made of metal. A stock is made of polymer (wood imitation). The manufacturer tried to reproduce the principle of shooting from the firearm counterpart as best as possible. The replica shoots 6mm BBs which are placed in special shells. Shells with BBs are...
Introducing the [Double Bell Lee Enfield Rifle, a highly realistic 1:1 spring replica of the Lee Enfield MKIII. This model boasts 100% real wood and full metal construction, making it the most authentic on the market. In the real world, the Lee Enfield NO.1 MK3 is a bolt-action, magazine-fed long rifle. It was adopted by British and Commonwealth armed...
In 1930, there was an advanced type Mosin Nagant was developed and named M1891/30 Rifle. The Mosin Nagant was the most popular rifle in the world and used by Soviet Army during WWII but stopped production in 1948 since the design was getting old. However it has been used in some countries like Turkey, former East Germany and even showed up in Korean War...
The AGM MP002C sniper rifle replica is an excellent choice for novice airsoft players looking to embark on their journey into this type of entertainment. This budget-friendly version of a sniper rifle is modeled after a popular designated marksman rifle used by special units worldwide. It operates on a "bolt action" principle, which means that after each shot, it requires manual cocking of the spring using the bolt handle, preparing the weapon for the next shot.
Scope and bipod NOT INCLUDED.
Please Choice separately from list below
![M1 GARAND RIFLE REPLICA [PJ]](https://airsoftguns.ie/18239-home_default/m1-garand-rifle-replica-pj-.jpg)
