The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Airsoft is a competitive team sport in which participants eliminate opponents by shooting each other with spherical plastic pellets launched via replica weapons called airsoft guns. Airsoft is commonly compared to paintball, which is a recreational shooting sport similar in concept but with some key differences.
Subcategories
There are 237 products.
Active filters
The body are made of plastic, similar to the real firearm, while the reloading handle assembly and RIS rail barrels are made of metal. The replica is perfectly balanced thanks to the construction in the bullpup standard, it retains small dimensions and great maneuverability. This makes the replica perfect for short, medium and long range games. Please...
The replica was made of durable polymer and metal. Metal parts include the slide and small elements such as the screws and magazine elements. The replica’s frame was made of polymer. The replica is powered with electricity which means that it can be easily used during winter games. Hop-Up system is one of the biggest advantages of this pistol, which...
Great replica in scale 1: 1 of one of the most popular shotgun, used by civilians, police or military. The replica has been produced by CYMA specialy for the airsoft market. Just like in other replica from that producer, rifle has a reliable mechanism in this case a pump action system powered by a spring.
Great replica in scale 1: 1 of one of the most popular shotgun, used by civilians, police or military. The replica has been produced by CYMA specialy for the airsoft market. Just like in other replica from that producer, rifle has a reliable mechanism in this case a pump action system powered by a spring. This Shotgun is present in 2 category: low-budget...
CM.136 is an airsoft replica of the latest Russian pistol, adopted as a standard sidearm for military and law enforcement agencies, alongside the Makarov PM, GSh-18 and SPS The CM.136 is produced by CYMA, a famous Chinese manufacturer, which has proven itself in the production of AEP pistols like their famous CM.127S or the CM.030. This time, Cyma offers...
Weight: 120 g Magazine model: low-cap Magazine material: metal Magazine capacity: 30 BBs Manufacturer: CYMA
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers. Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail...
Browning Hi Power MK III Pistol Replica A replica of the Browning gas-powered pistol, derived from a construction designed by John Browning. Very good workmanship and fitting of the parts guarantee trouble-free and precise work of the replica. The reasonable muzzle velocity makes this replica a perfect choice for a sidearm, used indoors or at short...
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, Full Metal + Wood Stock + Scope Bell KAR 98k Air cocking Shell-Ejecting Sniper ( Wood ver./ W Scope Set ) ( DBOY ) - Iconic bolt action rifle used by Nazi Germany during WWII - Air cocking system with shell eject function during bolt action. - Full travel bolt assembly
NOTICE! - Batteries are covered only by starting warranty. - Guns not included.
The M82 Barrett is a semi-automatic anti-materiel rifle used by US Army since 1989 and used by many units and army around the world. It is also called M107 in US army, or «Light Fifty for it .50BMG caliber. The M82 has two variant, the original M82A1 / M82A3 and M82A2, the bullpup version of the M82 Barret Family. A .50 cal Under licence; The airsoft AEG...
The Arcturus company is innovating the airsoft market for a long time with new products and the desire to expand its best products with better technical solutions. The AT-AK12U-PE is an improved version of the AT-AK12-PE replica of the Russian automatic rifle of the new Arcturus PE (Performance Enhanced) series with a 2-shot mode b > and new tactical...
Includes Free battery and charger. Functionally equivalent to the standard Steyer AUG rifle, the ASG/JG AUG A1 military version comes in a green finish and with a 1.5x standard scope.
The CZ 75 P-07 DUTY is the new generation of the CZ 75 family which was designed back in 1975 by the famous small arms manufacturer Česká Zbrojovka, Czech Repliblic.
A replica of DL 60 SOCOM pistol, manufactured by Danish company ASG. Comes with a silencer 195 mm long. It is equipped with safety lock and fixed HopUp system, which significantly improves the accuracy and range of replica. Replica is made of high quality ABS composite. Magazine holds 27 rounds. Under the barrel is placed Picatinny rail for mounting...
It's a replica of the newest series of Arcturus LITE, in which the upper and lower receivers were made of durable nylon. Thanks to the nylon body, the weight and the price of the replica were reduced. Using the nylon, the replica did not lose its strength, because the socket of the receiver extension tube and a barrel socket with a thread for the...
battery with charger inc. The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped with metal...
The CM company"s CM042A is another modified version of the legendary AK carbine The replica was made of metal elements and ABS. The profiled pistol grip, the tactical grip, the stock and the front grip with the magazine are made of plastic. The barrel, the body, the iron aiming sights, the trigger and the trigger guard are made of metal.
![CM.356 TACTICAL - BLACK [CYMA]](https://airsoftguns.ie/15510-home_default/cm356-tactical-black-cyma-.jpg)
![CM.125 MAGAZINE 30RD [CYMA]](https://airsoftguns.ie/18005-home_default/cm125-magazine-30rd-cyma-.jpg)
