The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high quality plastic as the front grip was made of plywood which presents itself great and lies comfortably in the operators hands.
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high quality plastic as the front grip was made of plywood which presents itself great and lies comfortably in the operators hands.
The replica was equipped with a metal hop-up chamber. A standard durable V.3 gearbox was used in this replica and this is the standard gearbox for the AK replicas. However, in this case, it was additionally modified and equipped with a reinforced casing. The next reinforced elements are the 7mm steel slide bearings, the reinforced steel thread-wheels and the directional piston head that increases the efficiency of the whole mechanism.
Weight: 2850 g
Magazine model: steel
Bearings type: steel sliding
Bearings diameter: 7 mm
Accumulator type: NiMH
Muzzle velocity: ~328 fps
Accumulator connector type: small Tamiya
Accumulator cells type: mini
Diameter of Internal barrel: 6,08 mm
Magazine capacity: 525 BBs
Accumulator capacitance: 1200 mAh
Material: wood, metal
Color: black
Length: 910 mm
Accumulator voltage: 8,4 V
Muzzle energy: ~1J
Length of internal barrel: 455 mm
Set Included:
* replica
* accumulator mini 8,4V 1200 mAh
* charger
* magazine hi-cap 525rd
Batteries and chargers are covered only by starting warranty.
Warrnig;
Adjustment rear sight only like in picture (green colour).
We don`t response for damages caused for bad adjustment (red colour)
Every replica pass initial check up.
It`s being checked and overshooted on XCORTECH X3200 chronograph.
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
The legendary E&L brand, whose excellent replicas of Russian assault rifles (to name just them!) have won the hearts of airsoft players from around the world, returns with the E&L Essential series. Replicas from this series are less expensive than those of the previous generation while maintaining their quality. Thanks to this, E&L products...
CM.051 is a replica of a submachine gun made famous in the days of Prohibition-era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. The buttstock, pistol grip, and foregrip are stylized on wood made of plastic. Magazine, receiver, frame group, bolt, bolt handle, safety, trigger, magazine...
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
A replica of the ARMY ARMAMENT company which is famous for the quality of its products and attention to detail. The replica is made of aluminium alloy and ABS. The bed was made of high quality plastic. Just like in the firearm, a two-stage trigger was used, pulling the trigger halfway allows single shot, while pulling the end its go to auto fire. The...
SC-01 - black [BOYI] from Boyi is very well made replica. Material used to build this rifle is aluminum worked by CNC technology (Upper Receiver) and resistant nylon fiber (Lower Receiver, stock, pistol grip) which is used to real gun production. On attention deserve precision flip-up folding sights with full regulation. Replica is equipped with three...
FAMAS F1 Assault Rifle Replica A replica made mainly from elastic and durable nylon polymer. Elements such as the barrel, bipod, trigger, screws, pins and internal elements were made from metal. The set includes a metal Hi-Cap magazine with a capacity of up to 300 BBs, which allows for longer firing.
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
0447A one of the most popular replicas in the world of ASG manufactured by the Chinese company [WORKS J.G.]. Due to extensive experience in the production of ASG replicas, the company [WORKS J.G.] gives us a very well-made carbine. The replica is made of aluminum alloy and ABS. The replica's body was made of high-quality plastic. [WORKS J.G.] tried to...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
A replica of the legendary American sub-machinegun, the so called grease gun which is made by the Snow Wolf company. It is a great opportunity for those who love military items from the period of the II World War. The replica’s body was made of steel when as the barrel and other minor elements are made of an alloy of zinc and aluminum. The Grease Gun is...
It's a replica of the newest series of Arcturus LITE, in which the upper and lower receivers were made of durable nylon. Thanks to the nylon body, the weight and the price of the replica were reduced. Using the nylon, the replica did not lose its strength, because the socket of the receiver extension tube and a barrel socket with a thread for the...
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers. Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail...
In 1930, there was an advanced type Mosin Nagant was developed and named M1891/30 Rifle. The Mosin Nagant was the most popular rifle in the world and used by Soviet Army during WWII but stopped production in 1948 since the design was getting old. However it has been used in some countries like Turkey, former East Germany and even showed up in Korean War...
The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high quality plastic as the front grip was made of plywood which presents itself great and lies comfortably in the operators hands.
![M4 CM.612 - Black [CYMA]...](https://airsoftguns.ie/14077-home_default/m4-cm612-black-cyma-airsoft-rifle.jpg)
![CM.605 - Black [CYMA]](https://airsoftguns.ie/19946-home_default/cm605-black-cyma-.jpg)
