The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
AGM MP007C is an airsoft replica of the iconic German submachine gun, the MP40, from the World War II era. Produced by AGM, this replica is meticulously crafted, staying true to the original, including the foldable metal stock. All the metal components of the original firearm have been precisely reproduced in this replica.
PLEASE NOTE!!!
Battery and charger not included!
Set includes
* replica
* magazine low cap 50rd
Weight: 2810 g
Color: black
Length: 850 mm
Material: ABS, aluminum
Fire mode: auto, single
Length of internal barrel: 260 mm
Diameter of Internal barrel: 6,08 mm
Magazine model: low-cap
Magazine capacity: 50 BBs
Magazine material: steel
Muzzle velocity:~328fps
Muzzle energy: 0,95 J
Accumulator type: cube
Accumulator type: NiMH
Accumulator connector type: small Tamiya
Accumulator cells type: mini
Gearbox version: 9 mm
Bearings type: polycarbonate sliding
Warranty period: 1months
Manufacturer: Airsoft Gun Manufacturer
PLEASE NOTE!!!
Battery and charger not included!
Set includes
* replica
* magazine low cap 50rd
Every replica passes the initial check-up. It's being checked and overshot on the XCORTECH X3200 chronograph.
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, Full Metal + Wood Stock
1:1 Ratio Airsoft Replica of Real Steel, Full Metal Construction except the ABS texture Grip, Gas Operated Toggle Action function works like a real one, Toggle jump back & upward for each shot.
A realistic replica of a select-fire (SEMI, AUTO) versions of the C96 pistol made by the Taiwanese WE-TECH company. The pistol used during World War II by the Nazi German armed forces. Solid full metal construction with a functional blowback system that further increases the realism. Frame, front sight, slide, slide stop, barrel, rear sight, safety,...
CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers. Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail...
042 is a replica of a German machine gun (Maschinengewehr MG42). The whole structure of metal (flash hider, barrel, barrel change flap, weapon receiver, grip, trigger, receiver cover, front sight and rear sight) mainly ZnAl. From steel is a bipod, barrel change latch, cocking slide, cocking handle, feed tray with cartridge stop and rear anti-aircraft...
The Sten 058 MK II SMG by [AGM] resurrects a significant chapter of world history. The Sten, a submachine gun utilized by the British Army during World War II, is notable for its straightforward yet sturdy design. This firearm was developed to rapidly replenish the British Army's substantial equipment losses following the evacuation from Dunkirk, employ...
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, was made of metal elements including the barrel, bolt, receiver, sights, trigger and trigger guard. The stock and handguard are made of plastic.
A replica of the US infantry primary rifle from World War II until the late 1950s, when the M14 and later the M16 rifle were introduced. Electric mechanism with a v7 gearbox compatible with Marui/CYMA parts, steel gears mounted on 6mm bearings and a quick spring change system. The buttstock is made of quality wood, and the elements such as barrel, gas...
AGM MP056B is an authentic replica of the German StG 44 (MP 44) automatic rifle, superbly crafted with a full-metal construction and real wood furniture, it is sure to impress both competitive airsoft players and reenactors.Primarily made of aluminum and steel, not only does it have an unparalleled build quality, but it is also highly reliable, durable,...
Designed as a replacement for the problem-ridden Type 11 machine gun, the Japanese Type 96 provided a much-needed upgrade to the outdated hopper-fed design of the Type 11. Loosely based on the designs of captured Czech ZB vz.26 rifles, the Type 96 went into production in 1936 and served the Japanese Imperial Army until their defeat in 1945. Please...
Spring-powered replica of Japanese Arisaka Type 38 bolt-action carbine used in various armed conflicts from World War I to the Vietnam War. A inner barrel and hop-up bucking in the VSR10 system, a brass cylinder (25x176mm) and a 90 degree metal trigger group assembly. The stock is made of high-quality real wood, and the elements such as barrel, bolt,...
FAMAS F1 Assault Rifle Replica A replica made mainly from elastic and durable nylon polymer. Elements such as the barrel, bipod, trigger, screws, pins and internal elements were made from metal. The set includes a metal Hi-Cap magazine with a capacity of up to 300 BBs, which allows for longer firing.
A replica of the legendary American sub-machinegun, the so called grease gun which is made by the Snow Wolf company. It is a great opportunity for those who love military items from the period of the II World War. The replica’s body was made of steel when as the barrel and other minor elements are made of an alloy of zinc and aluminum. The Grease Gun is...
CM.051 is a replica of a submachine gun made famous in the days of Prohibition-era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. The buttstock, pistol grip, and foregrip are stylized on wood made of plastic. Magazine, receiver, frame group, bolt, bolt handle, safety, trigger, magazine...
Introducing the latest innovation in Airsoft weaponry, inspired by iconic firearms seen in movies and video games the APS MK-2 Street Sweeper Revolver Shotgun. Crafted with a durable and lightweight polymer body combined with a heavy-duty metal rotating magazine and barrel, this shotgun not only offers realistic weight but also ensures durability during...
AGM MP007C is an airsoft replica of the iconic German submachine gun, the MP40, from the World War II era. Produced by AGM, this replica is meticulously crafted, staying true to the original, including the foldable metal stock. All the metal components of the original firearm have been precisely reproduced in this replica.
PLEASE NOTE!!!
Battery and charger not included!
Set includes
* replica
* magazine low cap 50rd
