The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers.
Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail were also made of metal ( ZnAl).
The hand guard is made of wood
The pistol grip and magazine is made of nylon.
The latch of the stock, which is the part exposed to easy breaking, has been made of steel, thanks to which the fault known from DBKi's RK models has been eliminated.
All parts are mounted on pins like in a real AK.
The replica does not have a charger and a battery in the set.
Diameter 5.95mm +/- 0.01mm. Highest Quality which affects effective accuracy, good shot grouping, long range and minimal jamming. Suitable for 6.01mm precision barrels. 6MM AIRSOFT BB [KILO9] |
0,20G BIODEGRADABLE PRECISION AIRSOFT BB - 5000RD
€14.95 |
|
|
400rd XL Size BB Speed Loader Clear or Tinted
€8.95 |
|
![0,20g Precision 6mm Airsoft BB - 5000rd [KILO9]](https://airsoftguns.ie/17239-hsma_default/020g-precision-6mm-airsoft-bb-5000rd-kilo9-.jpg "0,20g Precision 6mm Airsoft BB - 5000rd [KILO9]"){kind=small}
![0,20g Precision 6mm Airsoft BB - 5000rd [KILO9]](https://airsoftguns.ie/17239-large_default/020g-precision-6mm-airsoft-bb-5000rd-kilo9-.jpg "0,20g Precision 6mm Airsoft BB - 5000rd [KILO9]")
KILO9 Professional 0,20g -1kg (5000rds) Highest Quality which affects effective accuracy, good shot grouping, long range and minimal jamming. Suitable for 6.01mm precision barrels. Color: white Weight: 0,20g Manufacturer: KILO9 |
0,20g Precision 6mm Airsoft BB - 5000rd [KILO9]
€12.95 |
|
Every replica requires regular maintenance. Silicon oil Smart Oil™ is ideal for that kind of activities. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
|
Smart Oil™ Silicon Oil – 100 ml
€5.95 |
|
Design to install on Rear Retractable Stock, Sling is elastic for Close Quarter Battle use, Snap Hook Rifle Sling with snap on clip, Suitable for all rifle with Sling Swivel or hook, Both left & right handed compatible |
Elastic Bungee Snap Hook CQB Rifle Sling OD
€8.95 |
CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers.
Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail were also made of metal ( ZnAl).
The hand guard is made of wood
The pistol grip and magazine is made of nylon.
The latch of the stock, which is the part exposed to easy breaking, has been made of steel, thanks to which the fault known from DBKi's RK models has been eliminated.
All parts are mounted on pins like in a real AK.
Each rifle has a power of ~328 fps, which give you a possibility to provide fire on the middle distance.
Inside there is a reinforced ver.3 gearbox, steel gears are mounted on reinforced 7mm bearings.
Polymer piston has metal teeth and the cylinder - type "1" - was covered with black nickel "SMOKED" on the copper substrate providing perfect smoothness of the surface.
A huge advantage is the silent piston and cylinder head set, made of aluminum and covered with a blue anode,the piston head has bearing.
The replica has a powerful engine with increased torque equipped with neodymium magnets.
The way how gearbox is functioning will surprise a user.
The most important think, is that all accessories from other brand are compatible with this model, this influence on the longevity of your replica and on upgrade part and performance.
It is worth noting that all parts and accessories of other manufacturers are fully compatible with this model, which is very important when you decide on the upgrade.
Weight: 2690 g
Magazine model: ABS
Bearings type: steel sliding
Gearbox version: 9 mm
Bearings diameter: 7 mm
Magazine model: hi-cap
Muzzle velocity: ~328fps
Accumulator type: stick
Accumulator connector type: small Tamiya
Accumulator included in set: NO
Diameter of Internal barrel: 6,03 mm
Magazine capacity: 525 BBs
Material: aluminum, wood, steel
Color: black
Length: 730 mm
Muzzle energy: ~1J
Length of internal barrel mm : 290
Fire mode: auto, single
Length mm: 730
Inner barrel length mm: 290
Muzzle energy J: ~1
Magazine capacity BBs: 525
Muzzle velocity fps: ~328
Inner barrel diameter mm: 6,03
Set Included:
* replica
* magazine hi-cap 525rd
The replica does not have a charger and a battery in the set.
NOTICE!
Replica have a unique serial number!
Every replica pass initial check up.
It`s being checked and overshooted on XCORTECH X3200 chronograph.
Warrnig!
Adjustment rear sight only like in picture (green colour).
We don`t response for damages caused for bad adjustment (red colour)
With pleasure, we present an authentic replica of the M1903A3 Springfield rifle, one of the most revered firearms in history. This 1:1 scale model produced by the renowned [S&T]) company impresses not only with its faithful reproduction of weight and texture of the original but also with outstanding craftsmanship. Please Note!!! Scope and scope mount...
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, Full Metal + Wood Stock
Browning Hi Power MK III Pistol Replica A replica of the Browning gas-powered pistol, derived from a construction designed by John Browning. Very good workmanship and fitting of the parts guarantee trouble-free and precise work of the replica. The reasonable muzzle velocity makes this replica a perfect choice for a sidearm, used indoors or at short...
Spring-powered replica of a American WWII bolt-action rifle with a trigger assembly, barrel and hop-up rubber in the VSR10 system, and a steel cylinder (22x201mm). The stock is made of high-quality real wood, and the elements such as barrel, bolt, receiver, sights, magazine housing, trigger and trigger guard are made of steel and aluminum. Set includes a...
SR-33 REPLICA TT [SRC] The replica is made mostly of metal elements. The only element made of plastic are the pistol grip cladding. SR-33 REPLICA TT [SRC] is characterized by precise fitting of parts and a great work culture of the lock. Single-row magazine holds 11rd. The replica reaches the muzzle velocity up to ~ 280 FPS. Gun grip linings, markings on...
The Kar98k rifle replica is made of polymer and metal. The barrel, slide, sights and sling swivels are made of metal. A stock is made of polymer (wood imitation). The manufacturer tried to reproduce the principle of shooting from the firearm counterpart as best as possible. The replica shoots 6mm BBs which are placed in special shells. Shells with BBs are...
CM.051 is a replica of a submachine gun made famous in the days of Prohibition-era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. The buttstock, pistol grip, and foregrip are stylized on wood made of plastic. Magazine, receiver, frame group, bolt, bolt handle, safety, trigger, magazine...
This time WE company offers a true soviet classic. The MK is a replica of a renowned, 9x18mm Makarov bullet, compact pistol. The replica was made with the utmost care for details. It is a practically “full metal” construction, only side grip linings have been made from polymer. The quality of finish and how perfectly and tightly all parts fit together can...
An AEG replica of an American WWII light machine gun. The mechanism is a gearbox with a quick spring change system, steel gears mounted on 8mm ball bearings. The stock and handguard are made of high-quality real wood, and the elements such as barrel, bipod, receiver, carry handle, trigger guard, magazine release catch and sights are made of metal alloys....
Full metal shotgun powered by Green Gas with a muzzle velocity of 300-328 fps (measured on 1 bb). Equipped with a fixed hop-up, 3 inner barrels, switchable fire mode of 3 or 6 bbs at once and gas cartridge stored in the stock or pistol grip (depending on the model). NOTE! You can use shotshells in the Marui standard like CYMA shotshells. The set...
A replica of the legendary American sub-machinegun, the so called grease gun which is made by the Snow Wolf company. It is a great opportunity for those who love military items from the period of the II World War. The replica’s body was made of steel when as the barrel and other minor elements are made of an alloy of zinc and aluminum. The Grease Gun is...
1:1 Ratio Airsoft Replica of Real Steel, Full Metal Construction except the ABS texture Grip, Gas Operated Toggle Action function works like a real one, Toggle jump back & upward for each shot.
AGM MP007C is an airsoft replica of the iconic German submachine gun, the MP40, from the World War II era. Produced by AGM, this replica is meticulously crafted, staying true to the original, including the foldable metal stock. All the metal components of the original firearm have been precisely reproduced in this replica. PLEASE NOTE!!! Battery and...
The 1:1 scale replica of the German P38 pistol, manufactured by the Taiwanese company WE-Tech, is a faithful copy of the weapon used during **World War II**. The P38, replacing the Luger P08, was in service until the end of the Cold War. It features a solid **metal construction** with a functional **blowback system**, enhancing the realism of the shots....
A replica of the assault rifle which during the Vietnam War was a standard issue weapon of the American troops. The replica was made of metal elements and of ABS plastic. The barrel guard, and the stock which holds the battery were made of plastic. The rest of the elements such as the receiver, outer barrel and the cocking handle were made of metal. The...
CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers.
Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail were also made of metal ( ZnAl).
The hand guard is made of wood
The pistol grip and magazine is made of nylon.
The latch of the stock, which is the part exposed to easy breaking, has been made of steel, thanks to which the fault known from DBKi's RK models has been eliminated.
All parts are mounted on pins like in a real AK.
The replica does not have a charger and a battery in the set.
