CO2 12G CAPSULE

Reference: MOS-35-000766, 14798, CO2-12M

CO2 12G CAPSULE

Standard CO2 12g capsule for CO2 gas replika. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
€1.00
More CO2 12G CAPSULE
In stock
Suitable for precision barrels, BIODEGRADABLE  AIRSOFT BB

Reference: ROC-16-011618

0,23G BIO PRECISION BB Green - 4350RD

Diameter 5.95mm +/- 0.01mm. Highest Quality which affects effective accuracy, good shot grouping, long range and minimal jamming. Suitable for 6.01mm precision barrels Rockets Professional BIO 0,23g BBs. Long-awaited, high quality, precision Rockets BBs. Thanks to a special manufacturing process, Rockets are characteristic for their very tight cone of...
€12.95
More 0,23G BIO PRECISION BB Green - 4350RD
In stock
Out-of-Stock MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V

Reference: VB1501000

MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V

Battery charger for NI-MH / NI-CD batteries - 8.4/9.6V. This microprocessor charger automatically disconnects after charged the battery, completing the charging process, signaling the -green LED- battery charged. It has a signaling LED, the red color means charging and the green color - battery is full. Thanks, microprocessors charging is fast and the...
€16.95
More MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V
Out-of-Stock
All best sellers
  • Banner

    Banner left 1
  • Out-of-Stock
CM.045A AKS74U FULL METAL-REAL WOOD
  • CM.045A AKS74U FULL METAL-REAL WOOD
  • CM.045A AKS74U FULL METAL-REAL WOOD
  • CM.045A AKS74U FULL METAL-REAL WOOD
  • CM.045A AKS74U FULL METAL-REAL WOOD
  • CM.045A AKS74U FULL METAL-REAL WOOD
  • CM.045A AKS74U FULL METAL-REAL WOOD
  • CM.045A AKS74U FULL METAL-REAL WOOD
  • CM.045A AKS74U FULL METAL-REAL WOOD
  • CM.045A AKS74U FULL METAL-REAL WOOD
  • CM.045A AKS74U FULL METAL-REAL WOOD
  • CM.045A AKS74U FULL METAL-REAL WOOD
  • CM.045A AKS74U FULL METAL-REAL WOOD
  • CM.045A AKS74U FULL METAL-REAL WOOD

CM.045A AKS74U FULL METAL-REAL WOOD

FB2760-1J , CYM-01-000721
CYMA

CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers.

Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail were also made of metal ( ZnAl).

The hand guard is made of wood

The pistol grip and magazine is made of nylon.

The latch of the stock, which is the part exposed to easy breaking, has been made of steel, thanks to which the fault known from DBKi's RK models has been eliminated.

All parts are mounted on pins like in a real AK.

The replica does not have a charger and a battery in the set.

€249.95
Tax included
Quantity
Out-of-Stock

Description

CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers.

Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail were also made of metal ( ZnAl).

The hand guard is made of wood

The pistol grip and magazine is made of nylon.

The latch of the stock, which is the part exposed to easy breaking, has been made of steel, thanks to which the fault known from DBKi's RK models has been eliminated.

All parts are mounted on pins like in a real AK.

Each rifle has a power of ~328 fps, which give you a possibility to provide fire on the middle distance.

Inside there is a reinforced ver.3 gearbox, steel gears are mounted on reinforced 7mm bearings.

Polymer piston has metal teeth and the cylinder - type "1" - was covered with black nickel "SMOKED" on the copper substrate providing perfect smoothness of the surface.

A huge advantage is the silent piston and cylinder head set, made of aluminum and covered with a blue anode,the piston head has bearing.

The replica has a powerful engine with increased torque equipped with neodymium magnets.

The way how gearbox is functioning will surprise a user.

The most important think, is that all accessories from other brand are compatible with this model, this influence on the longevity of your replica and on upgrade part and performance.

It is worth noting that all parts and accessories of other manufacturers are fully compatible with this model, which is very important when you decide on the upgrade.

Weight: 2690 g

Magazine model: ABS

Bearings type: steel sliding

Gearbox version: 9 mm

Bearings diameter: 7 mm

Magazine model: hi-cap

Muzzle velocity: ~328fps

Accumulator type: stick

Accumulator connector type: small Tamiya

Accumulator included in set: NO

Diameter of Internal barrel: 6,03 mm

Magazine capacity: 525 BBs

Material: aluminum, wood, steel

Color: black

Length: 730 mm

Muzzle energy: ~1J

Length of internal barrel mm : 290

Fire mode: auto, single

Length mm: 730

Inner barrel length mm: 290

Muzzle energy J: ~1

Magazine capacity BBs: 525

Muzzle velocity fps: ~328

Inner barrel diameter mm: 6,03

Set Included:

* replica

* magazine hi-cap 525rd

The replica does not have a charger and a battery in the set.

NOTICE! 

Replica have a unique serial number!

Every replica pass initial check up.

It`s being checked and overshooted on XCORTECH X3200 chronograph.

Warrnig!

Adjustment rear sight only like in picture (green colour).

We don`t response for damages caused for bad adjustment (red colour)

Product Details
FB2760-1J , CYM-01-000721
GPSR

Brand: CYMA

4 other products in the same category:
M1 Garand Semi-Automatic Rifle Replica [AK] M1 Garand Semi-Automatic Rifle Replica [AK]

Reference: FB3615

M1 Garand Semi-Automatic Rifle Replica [AK]

A replica of the US infantry primary rifle from World War II until the late 1950s, when the M14 and later the M16 rifle were introduced. Electric mechanism with a v7 gearbox compatible with Marui/CYMA parts, steel gears mounted on 6mm bearings and a quick spring change system. The buttstock is made of quality wood, and the elements such as barrel, gas...
€549.95
More M1 Garand Semi-Automatic Rifle Replica [AK]
In stock
Tokarew TT-33 SR-33 REPLICA TT [SRC] Tokarew TT-33 SR-33 REPLICA TT [SRC]

Reference: GB-0711

Tokarew TT-33 SR-33 REPLICA TT [SRC]

SR-33 REPLICA TT [SRC] The replica is made mostly of metal elements. The only element made of plastic are the pistol grip cladding. SR-33 REPLICA TT [SRC] is characterized by precise fitting of parts and a great work culture of the lock. Single-row magazine holds 11rd. The replica reaches the muzzle velocity up to ~ 280 FPS. Gun grip linings, markings on...
€169.95
More Tokarew TT-33 SR-33 REPLICA TT [SRC]
In stock
JG100 A3 rifle replica, Airsoft JG100 A3 rifle replica, Airsoft

Reference: JGW-01-000515, JG098, 100

Brand: Jing Gong (JG)

JG098 A3 T3-K3 rifle replica, Airsoft

1/1 Scale High Power Assembled Electric Powered Airsoft AEG. The replica is made of metal and ABS plastic and is made by the JG company. The inner barrel, the iron aiming sights, the magazine and the trigger are made of metal while as the body, the stock and the pistol grip are made of durable ABS plastic. This combination which is also commonly practiced...
€209.95
More JG098 A3 T3-K3 rifle replica, Airsoft
In stock
CM.048 AK47 FULL METAL-REAL WOOD CM.048 AK47 FULL METAL-REAL WOOD

Reference: FB2879

Brand: CYMA

CM.048 AK47 FULL METAL-REAL WOOD

The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
€309.95
More CM.048 AK47 FULL METAL-REAL WOOD
In stock

Follow us on Facebook