![](https://airsoftguns.ie/13675-large_default/cm048m-ak47-full-metal-real-wood.jpg)
Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high quality plastic as the front grip was made of plywood which presents itself great and lies comfortably in the operators hands.
![]()
![]()
|
Professional 0,20g BBs - 1kg (5000rds) pellets
€12.95 |
|
![]()
![]() Every replica requires regular maintenance. Silicon oil Smart Oil™ is ideal for that kind of activities. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
|
Smart Oil™ Silicon Oil – 100 ml
€4.95 |
|
![]()
![]() Anti-fog - the anti-fog layer allows to operate in optimal conditions by removing the effects of condensation which is present whenever the temperature differences are high or during the wear of non-vented frames. Anti-scratch - improves the lenses’ durability and reduced the number of scratches. It extends the lifespan and improves the comfort or the user preventing it from scratching which can negatively influence the vision. |
Bolle Safety - Safety glasses SLAM - Clear - SLAPSI
€11.95 |
|
![]()
![]() Design to install on Rear Retractable Stock, Sling is elastic for Close Quarter Battle use, Snap Hook Rifle Sling with snap on clip, Suitable for all rifle with Sling Swivel or hook, Both left & right handed compatible |
Elastic Bungee Snap Hook CQB Rifle Sling OD
€7.95 |
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high quality plastic as the front grip was made of plywood which presents itself great and lies comfortably in the operators hands.
The replica was equipped with a metal hop-up chamber. A standard durable V.3 gearbox was used in this replica and this is the standard gearbox for the AK replicas. However, in this case, it was additionally modified and equipped with a reinforced casing. The next reinforced elements are the 7mm steel slide bearings, the reinforced steel thread-wheels and the directional piston head that increases the efficiency of the whole mechanism.
Weight: 2850 g
Magazine model: steel
Bearings type: steel sliding
Bearings diameter: 7 mm
Accumulator type: NiMH
Muzzle velocity: ~328 fps
Accumulator connector type: small Tamiya
Accumulator cells type: mini
Diameter of Internal barrel: 6,08 mm
Magazine capacity: 525 BBs
Accumulator capacitance: 1200 mAh
Material: wood, metal
Color: black
Length: 910 mm
Accumulator voltage: 8,4 V
Muzzle energy: ~1J
Length of internal barrel: 455 mm
Set Included:
* replica
* accumulator mini 8,4V 1200 mAh
* charger
* magazine hi-cap 525rd
Batteries and chargers are covered only by starting warranty.
Warrnig;
Adjustment rear sight only like in picture (green colour).
We don`t response for damages caused for bad adjustment (red colour)
Every replica pass initial check up.
It`s being checked and overshooted on XCORTECH X3200 chronograph.
G&G CM16 Raider M4 RIS airsoft rifle (Black) - Fantastic starter rifle for the absolute beginner, - Even if your not so tiny, this is still a full sized M4
The new UTR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys, so the replica weighs only about 2 kg. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox...
H.M.G. PARA Machinegun replica Classic infantry support machinegun modified for light inf. or paratroopers, lightweight and first of all very mobile for it”s category – thanks to which it”s easier to handle and carry in comparison to his standard issue cousins. The popular and approved by the community design will prevail in every situation. This replica...
S&T LEE ENFIELD SMLE NO. 1 MK III AIRSOFT RIFLE IN REAL WOOD This S&T reproduction is a fantastic replica of the famous SMLE, with a real wood stock, Iron Cylinder and almost full metal construction this rifle comes in at 3.5kg, that is less than 500grams lighter than the real rifle. S&T have decided to go with the slightly later square...
The Arcturus company is innovating the airsoft market for a long time with new products and the desire to expand its best products with better technical solutions. The AT-AK12U-PE is an improved version of the AT-AK12-PE replica of the Russian automatic rifle of the new Arcturus PE (Performance Enhanced) series with a 2-shot mode b > and new tactical...
The CM company"s CM042A is another modified version of the legendary AK carbine The replica was made of metal elements and ABS. The profiled pistol grip, the tactical grip, the stock and the front grip with the magazine are made of plastic. The barrel, the body, the iron aiming sights, the trigger and the trigger guard are made of metal.
Classic English sub machine gun immortalized by its action during the Second World War, where the British commando forces and resistance forces in occupied Europe, benefitted from its simple but efficient construction.
0447A one of the most popular replicas in the world of ASG manufactured by the Chinese company [WORKS J.G.]. Due to extensive experience in the production of ASG replicas, the company [WORKS J.G.] gives us a very well-made carbine. The replica is made of aluminum alloy and ABS. The replica's body was made of high-quality plastic. [WORKS J.G.] tried to...
Battery with charger inc.. Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body,...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
G&G CM16 Raider M4 CQB RIS - Construction with SPECIAL FORCE Marking, - Fully/Semi Automatic Shooting Airsoft Electric Gun (AEG), - Black Color Version
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
Replica of the new series of assault rifles from CYMA, This carabine are produce in different specification that include civil or military. The lower receiver, the upper receiver, the stock tube, the external barrel, the fire selector, the magazine release button, the trigger , the charging handle and the front and rear sigth are made in aluminium, that...
A replica of the assault rifle which during the Vietnam War was a standard issue weapon of the American troops. The replica was made of metal elements and of ABS plastic. The barrel guard, and the stock which holds the battery were made of plastic. The rest of the elements such as the receiver, outer barrel and the cocking handle were made of metal. The...
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high quality plastic as the front grip was made of plywood which presents itself great and lies comfortably in the operators hands.