The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high quality plastic as the front grip was made of plywood which presents itself great and lies comfortably in the operators hands.
The replica does not have a charger and a battery in the set.
Diameter 5.95mm +/- 0.01mm. Highest Quality which affects effective accuracy, good shot grouping, long range and minimal jamming. Suitable for 6.01mm precision barrels. 6MM AIRSOFT BB [KILO9] |
0,20G BIODEGRADABLE PRECISION AIRSOFT BB - 5000RD
€14.95 |
|
|
400rd XL Size BB Speed Loader Clear or Tinted
€8.95 |
|
![0,20g Precision 6mm Airsoft BB - 5000rd [KILO9]](https://airsoftguns.ie/17239-hsma_default/020g-precision-6mm-airsoft-bb-5000rd-kilo9-.jpg "0,20g Precision 6mm Airsoft BB - 5000rd [KILO9]"){kind=small}
![0,20g Precision 6mm Airsoft BB - 5000rd [KILO9]](https://airsoftguns.ie/17239-large_default/020g-precision-6mm-airsoft-bb-5000rd-kilo9-.jpg "0,20g Precision 6mm Airsoft BB - 5000rd [KILO9]")
KILO9 Professional 0,20g -1kg (5000rds) Highest Quality which affects effective accuracy, good shot grouping, long range and minimal jamming. Suitable for 6.01mm precision barrels. Color: white Weight: 0,20g Manufacturer: KILO9 |
0,20g Precision 6mm Airsoft BB - 5000rd [KILO9]
€12.95 |
|
Every replica requires regular maintenance. Silicon oil Smart Oil™ is ideal for that kind of activities. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
|
Smart Oil™ Silicon Oil – 100 ml
€5.95 |
|
Design to install on Rear Retractable Stock, Sling is elastic for Close Quarter Battle use, Snap Hook Rifle Sling with snap on clip, Suitable for all rifle with Sling Swivel or hook, Both left & right handed compatible |
Elastic Bungee Snap Hook CQB Rifle Sling OD
€8.95 |
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high quality plastic as the front grip was made of plywood which presents itself great and lies comfortably in the operators hands.
The replica was equipped with a metal hop-up chamber. A standard durable V.3 gearbox was used in this replica and this is the standard gearbox for the AK replicas. However, in this case, it was additionally modified and equipped with a reinforced casing. The next reinforced elements are the 7mm steel slide bearings, the reinforced steel thread-wheels and the directional piston head that increases the efficiency of the whole mechanism.
Weight: 2850 g
Magazine model: steel
Bearings type: steel sliding
Bearings diameter: 7 mm
Accumulator type: NiMH
Muzzle velocity: ~328 fps
Accumulator connector type: small Tamiya
Diameter of Internal barrel: 6,08 mm
Magazine capacity: 525 BBs
Material: wood, metal
Color: black
Length: 910 mm
Muzzle energy: ~1J
Length of internal barrel: 455 mm
Set Included:
* replica
* magazine hi-cap 525rd
The replica does not have a charger and a battery in the set.
Warrnig;
Adjustment rear sight only like in picture (green colour).
We don`t response for damages caused for bad adjustment (red colour)
Every replica pass initial check up.
It`s being checked and overshooted on XCORTECH X3200 chronograph.
Designed as a replacement for the problem-ridden Type 11 machine gun, the Japanese Type 96 provided a much-needed upgrade to the outdated hopper-fed design of the Type 11. Loosely based on the designs of captured Czech ZB vz.26 rifles, the Type 96 went into production in 1936 and served the Japanese Imperial Army until their defeat in 1945. Please...
Spring-powered replica of a American WWII bolt-action rifle with a trigger assembly, barrel and hop-up rubber in the VSR10 system, and a steel cylinder (22x201mm). The stock is made of high-quality real wood, and the elements such as barrel, bolt, receiver, sights, magazine housing, trigger and trigger guard are made of steel and aluminum. Set includes a...
A replica of the assault rifle which during the Vietnam War was a standard issue weapon of the American troops. The replica was made of metal elements and of ABS plastic. The barrel guard, and the stock which holds the battery were made of plastic. The rest of the elements such as the receiver, outer barrel and the cocking handle were made of metal. The...
FAMAS F1 Assault Rifle Replica A replica made mainly from elastic and durable nylon polymer. Elements such as the barrel, bipod, trigger, screws, pins and internal elements were made from metal. The set includes a metal Hi-Cap magazine with a capacity of up to 300 BBs, which allows for longer firing.
CYMA M14 AEG- semi-/full-automatic electric rifles- imitation wood furniture and the metal cocking handle makes this airsoft M14 look and fell very realistic. The replica does not have a charger and a battery in the set.
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, Full Metal + Wood Stock
CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers. Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail...
AGM MP007 is an airsoft replica of the iconic German submachine gun, the MP40, from the World War II era. Produced by AGM, this replica is meticulously crafted, staying true to the original, including the foldable metal stock. All the metal components of the original firearm have been precisely reproduced in this replica. PLEASE NOTE!!! Battery and...
This time WE company offers a true soviet classic. The MK is a replica of a renowned, 9x18mm Makarov bullet, compact pistol. The replica was made with the utmost care for details. It is a practically “full metal” construction, only side grip linings have been made from polymer. The quality of finish and how perfectly and tightly all parts fit together can...
Spring-powered replica of Japanese Arisaka Type 38 bolt-action carbine used in various armed conflicts from World War I to the Vietnam War. A inner barrel and hop-up bucking in the VSR10 system, a brass cylinder (25x176mm) and a 90 degree metal trigger group assembly. The stock is made of high-quality real wood, and the elements such as barrel, bolt,...
SR-33 REPLICA TT [SRC] The replica is made mostly of metal elements. The only element made of plastic are the pistol grip cladding. SR-33 REPLICA TT [SRC] is characterized by precise fitting of parts and a great work culture of the lock. Single-row magazine holds 11rd. The replica reaches the muzzle velocity up to ~ 280 FPS. Gun grip linings, markings on...
In 1930, there was an advanced type Mosin Nagant was developed and named M1891/30 Rifle. The Mosin Nagant was the most popular rifle in the world and used by Soviet Army during WWII but stopped production in 1948 since the design was getting old. However it has been used in some countries like Turkey, former East Germany and even showed up in Korean War...
CM.033 is a replica of submachine gun made famous in the days of Prohibition era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. Butt stock, rear grip, and fore grip is stylized on wood made of plastic. Magazine, frame group, bolt, barrel and receiver are made of metal. The set does not...
Browning Hi Power MK III Pistol Replica A replica of the Browning gas-powered pistol, derived from a construction designed by John Browning. Very good workmanship and fitting of the parts guarantee trouble-free and precise work of the replica. The reasonable muzzle velocity makes this replica a perfect choice for a sidearm, used indoors or at short...
A replica of the US infantry primary rifle from World War II until the late 1950s, when the M14 and later the M16 rifle were introduced. Electric mechanism with a v7 gearbox compatible with Marui/CYMA parts, steel gears mounted on 6mm bearings and a quick spring change system. The buttstock is made of quality wood, and the elements such as barrel, gas...
Introducing the latest innovation in Airsoft weaponry, inspired by iconic firearms seen in movies and video games the APS MK-2 Street Sweeper Revolver Shotgun. Crafted with a durable and lightweight polymer body combined with a heavy-duty metal rotating magazine and barrel, this shotgun not only offers realistic weight but also ensures durability during...
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high quality plastic as the front grip was made of plywood which presents itself great and lies comfortably in the operators hands.
The replica does not have a charger and a battery in the set.
