Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Browning Hi Power MK III Pistol Replica
A replica of the Browning gas-powered pistol, derived from a construction designed by John Browning. Very good workmanship and fitting of the parts guarantee trouble-free and precise work of the replica. The reasonable muzzle velocity makes this replica a perfect choice for a sidearm, used indoors or at short distances. The gas consumption is smaller compared to other pistol replicas of higher power, which makes this replica more economical in use.
Made entirely out of metal (aluminum). The linings and small internal elements that are made out of plastic. The replica is very well-made and it feels great in the hand.
Browning Hi Power MK III Pistol Replica
A replica of the Browning gas-powered pistol, derived from a construction designed by John Browning. Very good workmanship and fitting of the parts guarantee trouble-free and precise work of the replica. The reasonable muzzle velocity makes this replica a perfect choice for a sidearm, used indoors or at short distances. The gas consumption is smaller compared to other pistol replicas of higher power, which makes this replica more economical in use.
Made entirely out of metal (aluminum). The linings and small internal elements that are made out of plastic. The replica is very well-made and it feels great in the hand.
Producer; WET
Velocity [FPS]; 300
Type of fire; Semi-auto
Magazine type; low-cap
Magazine capacity [pcs]; 20
Hop-Up; Yes
Blow Back;Yes
Product weight [g]; 820
Product length [cm]; 19.50
Power supply; Gas
Set contains:
- replica
- magazine
S&T LEE ENFIELD SMLE NO. 1 MK III AIRSOFT RIFLE IN REAL WOOD This S&T reproduction is a fantastic replica of the famous SMLE, with a real wood stock, Iron Cylinder and almost full metal construction this rifle comes in at 3.5kg, that is less than 500grams lighter than the real rifle. S&T have decided to go with the slightly later square...
The TYP 38 replica is a great choice for those looking for a realistic, historical airsoft rifle. Its solid construction, upgrade potential, and attention to detail make it not only a fun gun to use but also a valuable collector's item. The TYP 38 replica is a faithful reproduction of the historic Japanese Army rifle, produced by S&T Armament (Smart...
CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers. Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail...
A realistic replica of a select-fire (SEMI, AUTO) versions of the C96 pistol made by the Taiwanese WE-TECH company. The pistol used during World War II by the Nazi German armed forces. Solid full metal construction with a functional blowback system that further increases the realism. Frame, front sight, slide, slide stop, barrel, rear sight, safety,...
1/1 Scale High Power Assembled Electric Powered Airsoft AEG. The replica is made of metal and ABS plastic and is made by the JG company. The inner barrel, the iron aiming sights, the magazine and the trigger are made of metal while as the body, the stock and the pistol grip are made of durable ABS plastic. This combination which is also commonly practiced...
Full metal shotgun powered by Green Gas with a muzzle velocity of 300-328 fps (measured on 1 bb). Equipped with a fixed hop-up, 3 inner barrels, switchable fire mode of 3 or 6 bbs at once and gas cartridge stored in the stock or pistol grip (depending on the model). NOTE! You can use shotshells in the Marui standard like CYMA shotshells. The set...
The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
Introducing the latest innovation in Airsoft weaponry, inspired by iconic firearms seen in movies and video games the APS MK-2 Street Sweeper Revolver Shotgun. Crafted with a durable and lightweight polymer body combined with a heavy-duty metal rotating magazine and barrel, this shotgun not only offers realistic weight but also ensures durability during...
042 is a replica of a German machine gun (Maschinengewehr MG42). The whole structure of metal (flash hider, barrel, barrel change flap, weapon receiver, grip, trigger, receiver cover, front sight and rear sight) mainly ZnAl. From steel is a bipod, barrel change latch, cocking slide, cocking handle, feed tray with cartridge stop and rear anti-aircraft...
The T100 by [S&T]) is an airsoft replica of the Japanese Type 100/40 submachine gun from World War II, inspired by the German [MP18]. There were two versions of this weapon: the earlier Type 100/40, equipped with a bipod and bayonet lug but lacking a muzzle brake, and the later Type 100/44, which was simplified, more reliable, and had a higher rate of...
1:1 Ratio Airsoft Replica of Real Steel, Full Metal Construction except the ABS texture Grip, Gas Operated Toggle Action function works like a real one, Toggle jump back & upward for each shot.
A replica of the legendary American sub-machinegun, the so called grease gun which is made by the Snow Wolf company. It is a great opportunity for those who love military items from the period of the II World War. The replica’s body was made of steel when as the barrel and other minor elements are made of an alloy of zinc and aluminum. The Grease Gun is...
With pleasure, we present an authentic replica of the M1903A3 Springfield rifle, one of the most revered firearms in history. This 1:1 scale model produced by the renowned [S&T]) company impresses not only with its faithful reproduction of weight and texture of the original but also with outstanding craftsmanship. Please Note!!! Scope and scope mount...
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, was made of metal elements including the barrel, bolt, receiver, sights, trigger and trigger guard. The stock and handguard are made of plastic.
The Kar98k rifle replica is made of polymer and metal. The barrel, slide, sights and sling swivels are made of metal. A stock is made of polymer (wood imitation). The manufacturer tried to reproduce the principle of shooting from the firearm counterpart as best as possible. The replica shoots 6mm BBs which are placed in special shells. Shells with BBs are...
Browning Hi Power MK III Pistol Replica
A replica of the Browning gas-powered pistol, derived from a construction designed by John Browning. Very good workmanship and fitting of the parts guarantee trouble-free and precise work of the replica. The reasonable muzzle velocity makes this replica a perfect choice for a sidearm, used indoors or at short distances. The gas consumption is smaller compared to other pistol replicas of higher power, which makes this replica more economical in use.
Made entirely out of metal (aluminum). The linings and small internal elements that are made out of plastic. The replica is very well-made and it feels great in the hand.