The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
There are 1238 products.
It has a very wide menu, allowing selection of all the necessary parameters. It remembers the results of 25 shots, and for the correct readings, are responsible set of 14 sensors.
Design to fit pistols with laser or flashlight mount. Retention system with additional velcro strap to secure weapon. Fully adjustable leg straps with rubberized strips eliminate sliding and quick release buckles. Built-in magazine pouch. It will fit medium or large size pistol. 2 Ways Carrying: Leg Harness and Waist. Weight: 460 g Material: 600D...
Made of high-quality aluminum machined on CNC machines, is adapted to be mounted on the [dovetail] and is equipped with a Quick Lock quick release lever that allows for quick installation on the replica. This configuration transfers the weight of the accessories to the center of the rifle, above the magazine. Thanks to this, the balance of the entire...
M9A1 pistol replica was made mostly of metal. Only the pistol grip cover panels are made of plastic. The pistol grip is widened and rubberized what allows for a secure grip even if the shooter has got wet hands. There is a WE logo on the pistol grip.
Theta Optics equipment is a quarantee of high quality for a reasonable price. Closed in a durable metal housing, transparent optics with a cross sight of mid-dot type and 4X magnification. Thanks to the backlight of the crosshair (red) you can use the scope successfully either during the day and night. The power supply is provided by the CR1620 battery....
CM.041 is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper,...
FSBE Tactical Vest - Molle The vest set includes: - module with three double ammunition pouches for M16/M4 magazines - module with medic pouch - admin pouch with a pocket for pistol magazine The vest is prepared for an assembly of dummy balistic inserts, and as a standard includes such inserts made of sponge. It has also a built-in steel lines system...
MSBS Plate Carrier type vest made from durable nylon. Equipped with vertical PALS straps on the front and rear panels. This allows for the attachment of additional pouches and equipment compatible with MOLLE load-bearing system. What’s more, additional equipment can be attached in any comfortable for the user way.
The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
Knife + clip H254G10 made of 100% metal
Simple slingshot from Fox Outdoor.- slingshot with sturdy metal frame- ergonomically shaped handle for good grip- special HiTec rubber band- handy leather basketTechnical data:- Height: 17 cm- Weight: 216 g
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, Full Metal + Wood Stock + Scope Bell KAR 98k Air cocking Shell-Ejecting Sniper ( Wood ver./ W Scope Set ) ( DBOY ) - Iconic bolt action rifle used by Nazi Germany during WWII - Air cocking system with shell eject function during bolt action. - Full travel bolt assembly
28 rounds capacity double-stack magazine with a base pad for fast, smooth, positive reload. NOTE! Magazine dedicated to the R5XX and R6XX (Hi-Capa / 2011) series replicas by Army Armament nad Baba Yaga by SRC.
The MSA MOE/ACR Sling Attachment attaches directly to the airsoft MOE Hand Guard or masada, providing a forward sling attachment point for the Magpul MS2, MS3
Tactical Boonie Hat A hat in classic style, the Boonie Hat, made from resistant to tearing Rip-stop material. It is a classic, well known style with broad brim and strap around the hat for masking purposes. The hat features additional ventilation holes.
Guarder SP85 spring (M85), Airsoft AEG, Upgrade your AEG's fps to 270 to 290fps. It is highly recommended to upgrade plastic bushings and spring guide to metal bushings and spring guide with this product.
Plate Carrier Harnes - camoflage Olive - OD (green), All pouches fixed with molle system. None of them is permanently attached to the vest and may be changed if necessary.
Canteen for water only - Made of 100% pvc - Green color
PLO scarf with print Made of 100% cotton
Operators tactical cap - Coyote [A.C.M] Universal operator tactical cap have adjustable head size from 57 cm to 62 cm. It`s equipped with velcro tapes allowing to attach team flags, moral pads, etc.
