The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
MSBS Plate Carrier type vest made from durable nylon. Equipped with vertical PALS straps on the front and rear panels. This allows for the attachment of additional pouches and equipment compatible with MOLLE load-bearing system. What’s more, additional equipment can be attached in any comfortable for the user way.
MSBS Plate Carrier type vest made from durable nylon. Equipped with vertical PALS straps on the front and rear panels. This allows for the attachment of additional pouches and equipment compatible with MOLLE load-bearing system. What’s more, additional equipment can be attached in any comfortable for the user way.
The vest has two compartments for ballistic inserts that enable the equipment of SAPI plates, both in front and in the back.
Features a set of pouches compatible with STANAG standard, an administrative panel with a hook&loop panel that allows for the attachment of any badges or stripes of choice, a double pouch for pistol magazines and an individual medical kit pouch.
Space for a ballistic plates ; Yes
Quick Release system ; No
Made of; Nylon
Material: Nylon
Weight: 946 g
Colour: Wz.93 Woodland Panther
System: MOLLE
Spare hydration bladder Capacity: 3 L
Weight: 50 g Material: 1000D polyester, elastic rubber Camouflage: black Height mm: 140 Width milimeters: 70 Perfect for securing 12 gauge shotgun shells to any MOLLE platform (plate carriers, body armours , chest rigs or drop leg MOLLE platforms).
Made of aluminum silencer adapted for mounting on barrels with 14CCW thread. Material: Aluminum Thread: 14 mm CCW Weight: 75 g Color: Coyote
This combo pack contains a 7.4v lippo battery and smart charger. The nunchuck configuration battery fits most airsoft rifles, and the smart charger will quickly charge and keep the battery topped off, small type tamiya plugs that are common to most airsoft rifles as well. Please note; battery & charger can looks different (not like on picture)!!!
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
Set shirt and pants. Ideal for airsoft and paintball enthusiasts or fishing and hunting. ACU uniform set consists of trousers and a blouse in a classic, comfortable cut that is ideal for any kind of combat and outdoor activity. The blouse and trousers alike were sewn from durable Polycotton Rip-Stop material and are equipped with a multitude of pockets.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
PKM machinegun replica The long awaited model of the universal PKM machinegun made by the A&K company was made of steel and aluminum. The bolt chamber, the chamber cover, the bipod, the carrying handle and the box magazine were made of steel, while as the rest of the elements, such as the outer barrel, the base of the front iron aiming sight, the gas...
Replacement of Standard Magazine for Thompson M1A1 AEG . Full Metal Construction . Operated by winding the compression spring . Large thumb dial on bottom of magazine allow you to wind it up . Plastic 6mm Bb's only . Capacity: 400 Rounds . Weight(Gram): 225 Made of: Metal Magazine type: Hi-Cap magazine Manufacturer: Snow Wolf
Headset A standard headset with a microphone for radios with Kenwood type plug. Purpose: Baofeng Radios / Radios with Kenwood Plug Material: Polymer Weight: 20 g Colour: Black Manufacturer: Baofeng
110X35mm Silencer A 110mm long silencer with a diameter of 35mm. The set includes two 14mm threads (left and right hand), which makes this product compatible with most of airsoft replicas.
Steel Cut Off Lever for Ver.II Gearbox
A revolver replica made mainly from metal. This allows it to retain a significant weight and appropriate balance. Metal elements include: the frame, barrel, cylinder magazine, trigger and hammer. Polymer parts include only the grip side panels. The replica is powered by a standard 12 g CO2 capsule that allows to fire projectiles with a muzzle velocity of...
QD swivel designed for fast attaching the sling.
Made of:Steel Weight: 120g Diameter: 6,03mm Length: 510mm Manufacturer: PPS Airsoft/SHS
USB charging cable and battery dock Input Power: USB DC 5V 2A Manufacturer: CYMA For 7,2V AEP Battery 500mAh or similar
MSBS Plate Carrier type vest made from durable nylon. Equipped with vertical PALS straps on the front and rear panels. This allows for the attachment of additional pouches and equipment compatible with MOLLE load-bearing system. What’s more, additional equipment can be attached in any comfortable for the user way.
