The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
FSBE Tactical Vest - Molle
The vest set includes:
- module with three double ammunition pouches for M16/M4 magazines
- module with medic pouch
- admin pouch with a pocket for pistol magazine
The vest is prepared for an assembly of dummy balistic inserts, and as a standard includes such inserts made of sponge.
It has also a built-in steel lines system which enables quick release from the vest.
FSBE Tactical Vest - Molle
The vest set includes:
- module with three double ammunition pouches for M16/M4 magazines
- module with medic pouch
- admin pouch with a pocket for pistol magazine
The vest is prepared for an assembly of dummy balistic inserts, and as a standard includes such inserts made of sponge.
It has also a built-in steel lines system which enables quick release from the vest.
The vest is equipped with rescue handle placed on the back and can be adjusted vertically and horizontally by hook and loop fasteners or tightening straps.
The vest refers in its construction to AAV vest with FSBE system.
Color: Olive
Weight: 1900g
Space for a ballistic plates: Yes
Z Tactical TEA Headset Cable & PTT for motorola, zTEA type headset cable & PTT. Fit military standard version plug. Button activated PTT (push to talk)
Commando pullover Made of 100% acryl
The sling also has a bungee feature to both ends of the sling made from top quality dual rubber belts inside the sling. The sling is adjustable for hunters and guns of all sizes. The sling is suitable for most types of rifles.
Fast transition from Single-Point® to two-point configuration Adjustment Loop for rapidly adding or removing sling tension with a single-hand Quick-detach lanyard provides emergency weapon release Sling Mounting
A cotton camouflaging tape that is ideal as a replica or any other piece of equipment camouflage. A stretchy material that ideally adheres to camouflaged surface. Size;50mm x 5mts
Set of Future knee protection pads Made mostly of nylon, highly ergonomic elbow protection pads. The protection shells were made of durable plastic and ensure a high level of protection against joint injuries. Thanks to their specific cone shape the spread of the force of the impacts guarantees increases amortization. The shells are reinforced with the...
Combo magazine pouch can hold 5.56 style magazines (M4 / AR-15 / M16 / ACR / FAMAS / SCAR-L / TAVOR / SA80 / Galil / Type 89 / F2000 / AUG) or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
Hand size circumference: 24 cm size: M Weight: 100 g Material: 600D polyester, synthetic leather, neoprene, spandex, plastic rubber Color: black
Gillie suit special forces Made of cotton and nylon. Complete suit including head!
Replica of Knee and Elbow Pads used by US troops serving worldwide. High impact shatter resistant caps and soft foam covered by durable Nylon 1000D makes them good for ASG, paint ball, skating, installing floors or any kind of work or play where you need to protect your knees and elbows.Includes:* 2x Knee Pad* 2x Elbow Pad
Comfortable tactical balaclava with one opening. Its design provides optimum protection and ventilation, ideal for wear both under the helmet and motorcycle or ski helmet. Made of high quality cotton with the addition of elastic Lycra, thanks to which it perfectly adapts to the shape of the user's head. Characteristics: - Retains its shape, flexibility...
Sling for AK rifles made of strong black canvas, steel hardware, fasteners are made of leather strap. Weight: 95 g Color: black Material: steel, nylon tape, synthetic leather Manufacturer: CS
Z Tactical TEA Headset Cable & PTT for Yaesu / Vertex, zTEA type headset cable & PTT. Fit military standard version plug. Button activated PTT (push to talk) unit, can be clipped on clothing or belt.
Very well made holster designed for pistol replicas. It is designed for safe and easy pistol handling. After pistol is locked up trigger is fully hidden so there is no possibility to fire. The safety lock gives possibility to single-motion draw and greater protection against attempted weapon takeaways. Holster is designed for right handed users. Weight:...
Patch PVC with velcro
Patch Poland Flag, having IFF/IR identifier operating in infrared light used for rapid identification of own troops. Patch Gen II IR - Black material has reflective properties when lighted only with infrared light.
FSBE Tactical Vest - Molle
The vest set includes:
- module with three double ammunition pouches for M16/M4 magazines
- module with medic pouch
- admin pouch with a pocket for pistol magazine
The vest is prepared for an assembly of dummy balistic inserts, and as a standard includes such inserts made of sponge.
It has also a built-in steel lines system which enables quick release from the vest.
![AK SLING - BLACK [CS]](https://airsoftguns.ie/18752-home_default/ak-sling-black-cs-.jpg)
