The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
MAGAZINE FOR CYMA ELECTRIC PISTOLS;
CM.122/CM.126/CM.127/CM.132S/CM.136S
Weight: 100 g
Color: black
Length: 165 mm
Material: metal
Magazine model: low-cap
Magazine capacity: 30 BBs
Manufacturer: CYMA
Low-cap magazines must be prepared in particular way before first usage. Steps that must be made:
* during first usage, magazine *MUST NOT* be fully loaded with bb`s,
* before first usage, magazine *SHOULD* be oiled with silicon oil for better working,
* during first usage, magazine *SHOULD* be loaded with few bb`s and subsequently core out. After magazine *SHOULD* be loaded with 10 bb`s more than first time and subsequently core out. Activity *SHOULD* be repeated until full mag capacity will be achieved.
* *REMEMBER*, If magazine is stored, it *MUST* be empty,
* *REMEMBER* to regularly oil the magazine with silicon oil.
Metal Hop-Up chamber for AK series Made of: Metal Manufacturer: CYMA
Great replica in scale 1: 1 of one of the most popular shotgun, used by civilians, police or military. The replica has been produced by CYMA specialy for the airsoft market. Just like in other replica from that producer, rifle has a reliable mechanism in this case a pump action system powered by a spring. This Shotgun is present in 2 category: low-budget...
PLO scarf with print Made of 100% cotton
G&G CM16 Raider M4 RIS airsoft rifle (Black) - Fantastic starter rifle for the absolute beginner, - Even if your not so tiny, this is still a full sized M4
The reinforced complete V2 version gearbox was designed to be mounted in the M4 replica series. It is a perfect solution for those who want to buy a good gearbox in a reasonable price. The gearbox's frame was adapted to mount 7mm bearings and the V3 version allows to use it in the M4/M16 family carbine replicas.
Simple Plate Carrier: Minimalist Protection, Maximum Mobility Simple Plate Carrier is an innovative solution for law enforcement, military and private security operators who focus on minimalism, mobility, reliability and protection. Designed for situations where every gram of equipment matters, this plate carrier offers incredible lightness without...
MSBS Plate Carrier type vest made from durable nylon. Equipped with vertical PALS straps on the front and rear panels. This allows for the attachment of additional pouches and equipment compatible with MOLLE load-bearing system. What’s more, additional equipment can be attached in any comfortable for the user way.
High-quality tappet plate for V2 gearbox. This material can withstand much more than plastic or ABS. It is flexible and resistant to impact. The installation of this component ensures reliable operation of the switch, the type of fire. CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember...
This magazine is fully compatible with AK brand like CYMA, Dboys, APS which can be found on our website, sometimes it need to be adjust by a little modification. Movie instruction below: * before first usage, magazine SHOULD be oiled with silicon oil for better working, * *REMEMBER* if magazine is stored, it *MUST* be empty, * *REMEMBER* to regularly oil...
Utility backpack made by waterproof high density Nylon material, Huge volume of capacity, able to store 2 Rifles (Sniper/Rifle), 1" molle webbing throughout the backpack, Extendable Gun Pouch is able to store up to 46"(~120cm) long rifle gun.
Replica of very well known helmet used by US Army. It's equipped with two mounting rails, designed to hold special mount for tactical accessories such as tactical flashlights, hearing protection, etc. There is also mount for night vision goggles at front of the helmet. It have a velcro tapes allowing to attach team flags, moral pads, etc. Weight: 665 g...
This time WE offers a true Soviet classic. MK is a replica of a known Makarov compact pistol for 9x18 mm ammunition. The replica was made with the highest care for details. It is a practically “full metal” construction, the only parts made of polymer are the grip linings. The quality of finish and how well all parts are aligned together can be experienced...
PicoAAB is the smallest, 3rd generation mosfet with Active Brake. It can work with 14.8V Li-Poly batteries. The system can be installed in every AEG. It can work with the smallest ASG replicas.
Tactical gloves are made of high-quality soft mesh microfiber fabric, which is breathable and soft, and there is an air hole on the fingers to effectively prevent the hands from being soaked by sweat. The material of the palm part is thickened and wear-resistant for increasing service life. Weight: 65 g Material: polyester, synthetic leather, spandex...
Tactical shirt made of 65/35 polyester/cotton ripstop and 100% polyester. Features: Combat shirt to be worn under body armor Lightweight and breathable Reinforced elbows WEIGHT (GR): 430.00
CM007 assault rifle replica - black The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped...
MAGAZINE FOR CYMA ELECTRIC PISTOLS;
CM.122/CM.126/CM.127/CM.132S/CM.136S
Weight: 100 g
Color: black
Length: 165 mm
Material: metal
Magazine model: low-cap
Magazine capacity: 30 BBs
Manufacturer: CYMA
![M4 CM.007 Full Metal [CYMA]...](https://airsoftguns.ie/14678-home_default/m4-cm007-full-metal-cyma-ris-carbine-aeg-rifle.jpg)