
Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
CM007 assault rifle replica - black
The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer.
The make is fully compatible with the Tokyo Marui standard, the replicas are equipped with metal hop-up chamber.
![]()
![]() Diameter 5.95mm +/- 0.01mm. Highest Quality which affects effective accuracy, good shot grouping, long range and minimal jamming. Suitable for 6.01mm precision barrels. 6MM AIRSOFT BB [KILO9] |
0,20G BIODEGRADABLE PRECISION AIRSOFT BB - 5000RD
€12.90 |
|
![]()
![]()
|
Professional 0,20g BBs - 1kg (5000rds) pellets
€11.95 |
|
![]()
![]() Every replica requires regular maintenance. Silicon oil Smart Oil™ is ideal for that kind of activities. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
|
Smart Oil™ Silicon Oil – 100 ml
€4.95 |
CM007 assault rifle replica - black
The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer.
The make is fully compatible with the Tokyo Marui standard, the replicas are equipped with metal hop-up chamber.
The particular parts of the replica are made in a way guarantying a proper fitting of the inner parts and the placement of the electronic and mechanical elements of the outer construction.
The replica is made of metal and plastic. The use of the metal gearbox in the replica ensures an extended operation than in the case of the fully plastic equivalents. Thanks to the metal gearboxes, the replica can be highly modified in order to improve the replica’s power.
The application of the foldable stock allows the adjustment of the replica to almost every user and the use of the replica in all situations and conditions. Thanks to the applications of the 22mm RIS rail on the top of the replica, it is possible to mount a red dot sight or a scope.
The carbine has got an adjustable hop-up system to which we gain access by pulling the cocking handle and which opens the dust cover which hides the adjustment knob.
The set includes:
- the replica,
- the magazine,
- a battery,
- a charger,
Velocity [FPS]: ~328
Propulsion / Powered by: Electric
Gearbox version: v2 Gearbox
Type of fire: Single, auto
Made of: Metal + plastic
Lenght [mm]: 770 - 850
Inner barrel length [mm]: 363
Weight [g]: 3000
Battery Voltage [V]: 8,4
Battery Capacity [mAh]: 1100
Battery included: Ni-MH
Magazine type: Hi-Cap magazine
Magazine capacity [pcs]: 300
Hop-Up: Yes, adjustable
Blow Back: No
The legendary E&L brand, whose excellent replicas of Russian assault rifles (to name just them!) have won the hearts of airsoft players from around the world, returns with the E&L Essential series. Replicas from this series are less expensive than those of the previous generation while maintaining their quality. Thanks to this, E&L products...
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
A replica of the assault rifle which during the Vietnam War was a standard issue weapon of the American troops. The replica was made of metal elements and of ABS plastic. The barrel guard, and the stock which holds the battery were made of plastic. The rest of the elements such as the receiver, outer barrel and the cocking handle were made of metal. The...
In 1930, there was an advanced type Mosin Nagant was developed and named M1891/30 Rifle. The Mosin Nagant was the most popular rifle in the world and used by Soviet Army during WWII but stopped production in 1948 since the design was getting old. However it has been used in some countries like Turkey, former East Germany and even showed up in Korean War...
Battery with charger inc.. Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body,...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
RIS rail system and an ergonomic pistol grip replica of the AK47 assault airsoft rifle that has got all of the advantages of the base model. - V.3 gearbox Please note; Battery and charger not included!!!
Replica of the new series of AK assault rifles, these rifles are produced in many specifications that include civil or military. Receiver, receiver cover, external barrel, safety lever, rear sight base, trigger, gas port block, gas cylinder, bolt carrier, front sight base and muzzle brake are made of steel and aluminium, that made the replica is more...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
L85 ETU Version Carbine Replica L85 replica is characteristic for its excellent craftsmanship with the loyal representation of details. This replica by G&G was made of metal, steel and polymer in a way that mirrors the construction of the original live firearm. It is also equipped with a rubber stock pad for an increased grip and stability during...
G&G CM16 Raider M4 RIS airsoft rifle (Black) - Fantastic starter rifle for the absolute beginner, - Even if your not so tiny, this is still a full sized M4
Very well made replica of G36K by [WORKS J.G.]. It is replica of assault rifle that is commonly known in the world. Original firearm is used by special forces like: SAS, GROM, Bundeswehr, GOE, Spanish Air Force and many more. It also popular in the airsoft sport environment because of relation between price and realization. The body is made from high...
Battery with charger inc. The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped with metal...
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
CYMA M14 AEG- semi-/full-automatic electric rifles- imitation wood furniture and the metal cocking handle makes this airsoft M14 look and fell very realistic.
This replica of M16A1 features a special triangular shaped handguard, pistol grip, fixed stock, three prong flash hider, forward assist, fixed carry handle upper with rear iron sight making it an authentic looking M16A1 used in the Vietnam War. Receivers, carry handle with rear sight, flash hider, trigger guard, safety lever, front sight, forward assist,...
CM007 assault rifle replica - black
The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer.
The make is fully compatible with the Tokyo Marui standard, the replicas are equipped with metal hop-up chamber.