Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 232 products.
Active filters
Cut Off Lever fits all V7 / M14 gearboxes. Ideal and durable spare part, the original should be worn.
SHS Super Shooter Airsoft Electric Gun Upgrade Parts Series. Replace Marui's Original Gears with this upgrade High Precision Torque Up Gear. CNC Steel Construction. Drive ratio: 32:1. Suitable for Airsoft AEG models with Version 2 & 3 Gearbox.
Made of: steel Weight: 130g Diameter: 6,03mm Length: 450mm Manufacturer: PPS Airsoft/SHS
TITAN V2™ is an AEG Control System for V2 gearboxes which will transform your AEG into an advanced training weapon. Adjust your AEG and check the Statistics using USB-Link and GATE Control Station app for PC and Android devices. Gain a tactical advantage thanks to the extremely fast trigger response, option of adjusting trigger sensitivity to your...
TITAN V3™ Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require highest quality....
Tappet plate for V.2 gearbox
The ULTIMATE® air nozzle have built-in rubber seal to prevent loss of compression from the nozzle. All ULTIMATE® nozzles follow TM standards. Nozzle, air, G3-A3/A4/SG-1/MC51 series
King Arms Airsoft AEG Upgrade Part Series - Selector Plate for Marui MP5 Ver2 Gearbox - Suitable For 6mm & 7mm Gear Box - Coated Copper Conductor
COMPLETE CYMA Enhanced Version 3 (V3) Full Metal Gearbox & High Torque Motor Weight: 745 g Gearbox version: v.3 Bearings diameter: 7 mm
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Well MB01, MB08, MB01/08.
ENERGY Enhanced Loading Muzzle- For Tokyo Marui M1911 GBB Airsoft Pistol
Deep Fire Enlarged Metal Nozzle Essential part for upgrading your Airsoft AEG Tighter sealed air nozzle ensures more barrel exit muzzle velocity This Oil Lubricated Air Seal Nozzle increase the air tightness of the cylinder Direct replace the original air nozzle of Airsoft Electric Gun As always, upgrading AEG require necessary skill & technique to...
Made of: steel Weight: 80g Diameter: 6,03mm Length: 363mm Manufacturer: PPS Airsoft
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Cyma 701, MB03, Bar 10. Diameter without o-rings 9,6/18,25...
The ULTIMATE® air nozzle have built-in rubber seal to prevent loss of compression from the nozzle. All ULTIMATE® nozzles follow TM standards. Nozzle, air, P90 series
Battery meter works with a voltage from 3.7V to 22.2V, LiPo Battery Meter LCD 1S-6S,2s-6s, The electronic system supporting the control and diagnostics package Li-Po/Li-Fe/Li-ion.
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
The ULTIMATE® Upgrade Series cylinder head have been CNC manufactured in machine-aluminium and thereafter anodized with a colour code for easy recognition
King Arms Tappet Plate for M14 AEG Gear Box v.7, high-quality part which provides high-performance and extra durability. Made from high-strength ABS plastic
Steel Ball Bearing Spring Guide V3 A ball bearing spring guide made of steel. It is intended for installation in gearbox V3 replicas. Bearings enable increased reliability and extended gearbox lifetime.