The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
The ULTIMATE® Upgrade Series cylinder head have been CNC manufactured in machine-aluminium and thereafter anodized with a colour code for easy recognition
The ULTIMATE® Upgrade Series cylinder head have been CNC manufactured in machine-aluminium and thereafter anodized with a colour code for easy recognition. The heads have been designed with double rubber seals to minimize loss of compression from the cylinder. The special ‘trumpet design’ ensures optimal delivery of air to the barrel/BB. Furthermore, the cylinder heads have a powerful built-in rubber band that absorbs the shock from the piston head.
Black for CA version 7 gearbox.
ULTIMATE®’s cylinder parts are designed to give the best possible air compression and durability. For this reason we recommend always using ULTIMATE® cylinder parts and not combining or mixing with other upgrade parts as this can affect the result and performance of the upgrade.
SHS Aluminum Air Seal Nozzle (long Type) -- 7075 Aluminum Construction -- For AK Series Airsoft AEG Rifle -- Purple Color
High quality professional HopUp rubber made of specially selected blend of silicone rubber. When correctly installed it will improve the tightness and BB's performance. Manufactured by Action Army company from Taiwan. Dedicated to Marui standard replicas: VSR-10, Hi-Capa, Glock, PX4, FN5-7, P226, Detonics, M1911, MEU, SOCOM and similar. Also fits WE GBB...
Anti-heat selector plate, G3 series Made from a heat resisting compound. All electrical contact surfaces have a high-quality plating to ensure low inner resistance in ohm (Ω).
Made of: Aluminum Weight: 10g Manufacturer: Super Shooter/SHS
Complet spring set for gearbox G36. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be cancelled. Weight: 5g Material: steel
Design for Airsoft Electric Gun AEG Gearbox - Version II, Enhanced Stock Wire Set for battery on front, , Perfectly welled together for maximum current flow
Gearbox type V2 with reinforced construction. The front part has been strengthened, the most exposed to damage has been considerably thickened, and the place of the contact with the cylinder has been improved so as to evenly transfer the loads. It is prepared for mounting 8mm bearings. Mounting this gearbox to replicas of other manufacturers than J.G. ,...
Double Seal Purpose: M4 Replicas Material: Aluminium Length: 21,4mm Manufacturer: Super Shooter/SHS
Purpose: M4 Replicas Material: Aluminium Length: 20.90mm Manufacturer: Cyma
Magazine Valve Key - Model:PA 0401- Gross Weight:90g- Constructed with Steel Material- Suitable For Marui/ WA/ KSC/ Maruzen Gas Charging Valve- Use for disassemble magazine value of gas blowback pistol/rifle Magazine valve key made of metal. Design in such way that this one key will fit the divergent valve standard's.
6,03 steel precision inner barrel - 285 mm Precision inner barrel with a length of a 285 mm and 6,03mm diameter manufactured by PPS Airsoft. Precision barrel adds a lot to accuracy, range and repeatablitity of a shots. Precision barrel requires high quality BB"s used.
Made of:Steel Weight: 120g Diameter: 6,03mm Length: 510mm Manufacturer: PPS Airsoft/SHS
Hop-Up Bucking for Tuned Replicas The Hop-Up bucking was made from silicon, which causes it to retain its quality in low temperatures, because it does not harden as is the case with ordinary rubber buckings. This model performs best in replicas with increased muzzle velocity.
Steel Cut Off Lever for Ver.II Gearbox
Metal trigger pin for M4, M16 series and similar replicas. It may require shortening to fit perfectly with your replica. Weight: 2 g Material: steel Length: 29 mm
Spring Guide w/Bearing v.3Ball bearing spring guide improves the operation of the entire mechanism (spring movement around its own axis).Also slightly improved velocity.
The ULTIMATE® Upgrade Series cylinder head have been CNC manufactured in machine-aluminium and thereafter anodized with a colour code for easy recognition
