The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
6,03mm steel precision inner barrell - 363 mm
The mount of the precision barrel improves the replica’s precision and range and also the repeatability of shots.
The mount of the 6,03mm precision barrel in the replica requires the use of high quality BB pellets.
SHS Aluminum Air Seal Nozzle (long Type) -- 7075 Aluminum Construction -- For AK Series Airsoft AEG Rifle -- Purple Color
6,03 steel precision inner barrel - 285 mm Precision inner barrel with a length of a 285 mm and 6,03mm diameter manufactured by PPS Airsoft. Precision barrel adds a lot to accuracy, range and repeatablitity of a shots. Precision barrel requires high quality BB"s used.
A hop-up rubber specially created for demanding shooters. Suitable for VSR-10 replicas and clones (VSR10,MB03 ...) for Marui, WE, KJW - 1911 gas pistols, Hi Capa, SIG, KP05, KP06 ... Thanks to its innovative design, it provides the perfect position of the bb before the shot, which guarantees perfect curling and repeatability of results. The specially...
Shim Set: 6x 0,2mm, 6x 0,3mm, 6x 0,5mm
Weight: 20 g Material: steel Length: 172 mm
Spring Guide w/Bearing v.3Ball bearing spring guide improves the operation of the entire mechanism (spring movement around its own axis).Also slightly improved velocity.
G&G Green Hop Up Rubber (40 degree). The Hop-Up rubber was made of silicon thanks to which is keeps it properties even in low temperatures due to the fact that it does not get stiff just like in the case of regular rubber. It performs perfectly both in typical conditions as in negative temperatures – it keeps it properties even in the temperatures...
Hop-Up Chamber with ball illumination is an innovative addition to replicas that allows you to improve the precision of shots when playing in low light conditions. This advanced Hop-Up chamber was created to provide shooters with unparalleled accuracy and gameplay experience. Our latest product, the Hop-Up Chamber with ball illumination, is a real...
This is a precision machined SHS Steel Cut Off Lever for Version 3 metal gearbox AEGs. This Steel Cut Off Lever should fit in most Version 3 metal gearboxes without any modification. The steel construction makes this cut off lever twice as strong as normal zinc alloy cut off levers. The SHS Steel Cut Off Lever is extremely sturdy and precisely machined,...
Steel Ball Bearing Spring Guide V3 A ball bearing spring guide made of steel. It is intended for installation in gearbox V3 replicas. Bearings enable increased reliability and extended gearbox lifetime.
Made of:Steel Weight: 120g Diameter: 6,03mm Length: 510mm Manufacturer: PPS Airsoft/SHS
UPGRADE SET FOR L96 - MB01, MB05, MB06 AND MB08 [WELL]- hard aluminium piston- Spring 500 fps- hard aluminium spring guide with bearningCAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be cancelled.
PicoAAB is the smallest, 3rd generation mosfet with Active Brake. It can work with 14.8V Li-Poly batteries. The system can be installed in every AEG. It can work with the smallest ASG replicas.
Cut Off Lever fits all V7 / M14 gearboxes. Ideal and durable spare part, the original should be worn.
Precisely made, steel, CUT-OFF lever dedicated to V2 - M4 type gearboxes. The installation of this component ensures reliable operation of the gearbox. CAUTION!If you decide to personal installation gearbox parts as gears, pistons, springs, etc., you must remember that your warranty will be canceled. Weight: 5 g Material: steel Package quantity: 1 pcs.
Made of: Aluminum Weight: 10g Manufacturer: SHS
