The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 232 products.
Active filters
It has a very wide menu, allowing selection of all the necessary parameters. It remembers the results of 25 shots, and for the correct readings, are responsible set of 14 sensors.
WELL Trigger Assembly Suitable for airsoft Type 96 series by WELL MB-01 / SD96 / UTG Type 96 Shadow Ops / Bravo / Double Eagle / Maruzen and other compatible airsoft bolt action sniper rifles. Steel made upgrade part.
Indestructible steel spring guide for V3 gearboxes is an ideal alternative if your own is damaged or you want to upgrade your replica. Thanks to the use of a bearing ensures proper spring operation. Pefrect choice if you want instal strong spring. Weight: 35 g Material: steel CAUTION!If you decide to personal installation gearbox parts as gears, pistons,...
The USB-Link is used for connecting GATE TITAN and ASTER with PC, Mac or Android devices. Kit contents: USB-Link for GCS app USB-C cable [0.6 m / 1 ft 11 in] Micro-USB cable [0.6 m / 1 ft 11 in] 'Troubleshooting' Card Quickstart Guide
A high-quality spring designed to improve performance in the replica. Made of high-quality, hardened steel. Can work with Cyma 701, MB03, BAR10. Outer diameter -11,1mm, internal diameter-8,2mm. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working,...
A high-quality spring designed to improve performance in the replica. Made of high-quality, hardened steel. Can work with Cyma 701, MB03, BAR10. Outer diameter -11,1mm, internal diameter-8,2mm. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working,...
DESCRIPTION A high-quality spring designed to improve performance in the replica. Made of high-quality, hardened steel. Can work with L96, TM models, such as : WELL MB4401, 02, 03, 06, 07, 08, 09. Outer diameter -11,6mm, internal diameter-8,1mm. CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must...
UPGRADE SET FOR VSR10 - MB02/03 SERIES [WELL]- hard aluminium piston- Spring 500 fps- hard aluminium spring guide with bearingCAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be cancelled.
UPGRADE SET FOR L96 - MB01, MB05, MB06 AND MB08 [WELL]- hard aluminium piston- Spring 500 fps- hard aluminium spring guide with bearningCAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be cancelled.
Upgrade trigger for MP5 series.
Upgrade trigger for G3 series. The ULTIMATE® Upgrade Series trigger is made of steel to secure the best performance and durability.
ULTIMATE® Upgrade Switch assembly. Switch assembly, AK-47
Spring guide for version 6/7 gearbox. ULTIMATE® spring guides has steel bearings and rotatable guide. This minimizes friction when the spring is compressed, primarily effecting the rate of fire.
Safety cover for MP5/G3 series Made from the same heat resisting compound as other electrical components to ensure minimum wear. The ULTIMATE® Upgrade Series are made of reinforced material to secure the best performance and durability.
The ULTIMATE® air nozzle have built-in rubber seal to prevent loss of compression from the nozzle. All ULTIMATE® nozzles follow TM standards. Nozzle, air, P90 series
The ULTIMATE® air nozzle have built-in rubber seal to prevent loss of compression from the nozzle. All ULTIMATE® nozzles follow TM standards. Nozzle, air, MP5-K/PDW series
The ULTIMATE® air nozzle have built-in rubber seal to prevent loss of compression from the nozzle. All ULTIMATE® nozzles follow TM standards. Nozzle, air, G3-A3/A4/SG-1/MC51 series
The ULTIMATE® 6mm bushings are perfectly suited for upgrading all TM-compatible gear boxes that use nylon bushings as standard.
Gear sector clips are used to prevent “empty shooting” and is primarily used with high-speed tunings (25+ rounds/sec.). 1 piece.
The ULTIMATE® Upgrade Series cylinder head have been CNC manufactured in machine-aluminium and thereafter anodized with a colour code for easy recognition
