The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 232 products.
Active filters
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
Airsoft Barrel Nut Wrench - Model: EX 331 - Weight: 95g - Gross Weight:110g - Made by Element - For DD Lite/RIS II M4A1/MK18/Omega X Series/PWS Diablo Rail/MK110/MK112/MK114/MK116
Element Delta Ring and Butt Stock Tube Wrench Tool- For M4/M16 Series Rifle- Also suitable for AK Flash Hider- All-in-ONE Tool
Element Hand Grip Motor cover for M4, AEGSpecial patch end-screw eliminates the troublesome to replace your motor Essential part for upgrading your Airsoft Electric Gun AEG Rifle
ENERGY Enhanced Loading Muzzle- For Tokyo Marui M1911 GBB Airsoft Pistol
Completed Gearbox set ready to upgrade Come With Motor The spring 115 used in the gearbox will give you +/- 380 FPS - depend on the barrel and hop-up unit, used in your replica. Essential part for upgrading your Airsoft Electric Gun AEG To build a tight & durable gearbox Compatible with Tokyo Marui, JG, AGM, CM - M4/M16. 8mm Bearing Enhanced Gearbox...
Fuse - 1 pcs.- 25 amp. It rarely needs replacing, but this small part protects the motor from burning out in case of mechanical problems.
G&G Green Hop Up Rubber (40 degree). The Hop-Up rubber was made of silicon thanks to which is keeps it properties even in low temperatures due to the fact that it does not get stiff just like in the case of regular rubber. It performs perfectly both in typical conditions as in negative temperatures – it keeps it properties even in the temperatures...
G&P Airsoft AEG Upgrade Part Series " Polyamide Low Resistance " -- Selector Plate for Marui G3 Ver2 Gearbox -- "For Airsoft Electric Toy Gun Use Only"
G&P Airsoft AEG STEEL Spur Gear Set For Marui Compatible Gearbox Version 2
Design for Airsoft Electric Gun AEG Gearbox - Version II, Enhanced Stock Wire Set for battery on front, , Perfectly welled together for maximum current flow
G36 Replica Pin Steel assembly pin for G36 replicas.
Multifunctional programmable 3rd generation MOSFET. The system has 10 functions. Its latest feature is the 3-rd Burst Mode, which allows for limiting the number of shots. The system allows for lossless rate of fire adjustment. It protects Li-Ion batteries: LiPoly and LiFePO4. It has a built-in active brake and it protects contacts against damage. The...
NanoAAB is the latest, 3rd generation MOSFET with active brake. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and the most reliable MOSFET with active brake in the market. Thanks to its special coating, it is resistant to atmospheric conditions.
NanoASR is the latest standard third generation MOSFET. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and most reliable MOSFET in the market. Thanks to its special coating, it is resistant to atmospheric conditions.
It has 8 functions. Thanks to its special coating, it is resistant to atmospheric conditions (Military Specification MIL-V-173C). Battery protection supports: Li-Po 7.4V / 11.1V / 14.8V. You can also disable the protection and use other batteries.
PicoAAB is the smallest, 3rd generation mosfet with Active Brake. It can work with 14.8V Li-Poly batteries. The system can be installed in every AEG. It can work with the smallest ASG replicas.
