The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 7kg
Price
Price
€1.00 - €630.00
Subcategories
There are 297 products.
Active filters
Complet spring set for gearbox P90. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be cancelled. Weight: 5 g Material: steel
Hop-Up Chamber with ball illumination is an innovative addition to replicas that allows you to improve the precision of shots when playing in low light conditions. This advanced Hop-Up chamber was created to provide shooters with unparalleled accuracy and gameplay experience. Our latest product, the Hop-Up Chamber with ball illumination, is a real...
Weight: 5 g Material: steel
Piston is designed to help increase rate of fire because it's light and durable. Full teeth are made with high precision providing faultless work of gearbox mechanism. Weight: 15 g Material: steel, nylon Length: 68 mm Diameter: 19 mm
S&T LEE ENFIELD SMLE NO. 1 MK III AIRSOFT RIFLE IN REAL WOOD This S&T reproduction is a fantastic replica of the famous SMLE, with a real wood stock, Iron Cylinder and almost full metal construction this rifle comes in at 3.5kg, that is less than 500grams lighter than the real rifle. S&T have decided to go with the slightly later square...
Anti-heat selector plate, G3 series Made from a heat resisting compound. All electrical contact surfaces have a high-quality plating to ensure low inner resistance in ohm (Ω).
A complete safety selector lever, dedicated to the Cyma M4 / M16 replica. The selector fits all Cyma M4 replicas, no matter what the body material is. However, attention should be paid to the diameters of the opening on the right side of the body. The diameter of the blanking piece supplied with the kit is 8.35 / 10.42 mm. It is a complete kit. CAUTION!...
It has 8 functions. Thanks to its special coating, it is resistant to atmospheric conditions (Military Specification MIL-V-173C). Battery protection supports: Li-Po 7.4V / 11.1V / 14.8V. You can also disable the protection and use other batteries.
The Beretta M92 FS is an electric replica equipped with a fixed hop-up and electric blow back system. Lightweight construction made of durable polymer includes a custom gearbox powered by four AAA batteries. 16 BBs magazine included.
Professional quick-drying paint to mask, airosft weapons, vehicles and parts repairs. Matte texture paint absorbs the sun's rays and reduces glare. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
Weight: 170 g Material: metal
Arcturus LWT MK-II CQB 10" The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass. The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device,...
Professional quick-drying paint to mask, airosft weapons, vehicles and parts repairs.- Container: 400ml, PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND! PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
Hop-Up rubber made from silicon. It is designed for mechanism with spring from 130 m/s.
Inlet Valve An inlet valve made from stainless steel, designed for most gas magazines and 40mm grenades.
8mm oilless bushings For any 8mm gearbox. Manufactured by SHS. Made of steel. Incredibly durable.
As always, upgrading AEG, Design for any 6mm Gearbox Version, Suitable for ALL Airsoft Electric Gun
Top Quality!!!. Industrial Army Paint - Fluor Red-Orange - 400 ml Spray Can Spray fluor paint Quick dry PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
Arcturus LWT MK-II CQB 10" The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass. The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device,...
Professional quick-drying paint to mask, airosft weapons, vehicles and parts repairs.- Container: 400ml, Color: Forest Green PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
