The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Inlet Valve
An inlet valve made from stainless steel, designed for most gas magazines and 40mm grenades.
The replica is made entirely of metal. The only elements made of polymer are the pistol grip panels. The magazine can hold up to 24 BBs. The loading of the magazine is very simple thank to a round opening located on the side of the spring. The replica features a winged safety on the slide, similarly to the live firearm original. The Blow-Back system...
AGM MP007C is an airsoft replica of the iconic German submachine gun, the MP40, from the World War II era. Produced by AGM, this replica is meticulously crafted, staying true to the original, including the foldable metal stock. All the metal components of the original firearm have been precisely reproduced in this replica. PLEASE NOTE!!! Battery and...
The grenade’s diameter is 40mm and it is made of metal. The green gas grenade is designed to be used with the grenade launcher having the inner diameter of 40mm. The grenade is powered by green-gas. It holds 96 BB pellets.
0447A one of the most popular replicas in the world of ASG manufactured by the Chinese company [WORKS J.G.]. Due to extensive experience in the production of ASG replicas, the company [WORKS J.G.] gives us a very well-made carbine. The replica is made of aluminum alloy and ABS. The replica's body was made of high-quality plastic. [WORKS J.G.] tried to...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
Weight: 105 g Material: brass Length: 510 mm Internal diameter: 6,03 mm
Battery NiMH 1600mAh 8,4V - mini SF type [8FIELDS] Accumulator type: NiMH Accumulator voltage: 8.4 V Accumulator capacitance: 1600 mAh Accumulator cells type: mini Accumulator connector type: small Tamiya NOTICE! Batteries are covered only by starting warranty.
TITAN V3™ Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require highest quality....
Gloves are an excellent choice and will prove ideal for any situation that requires hand protection. Both during combat and daily use. They are also intended for users, for whom combat is everyday work. The Shield gloves guarantee the best protection against hand injuries which are related to hits or hand to hand combat. Material: 600D polyester,...
This modern microprocessor charger is designed for NiMH and NiCD batteries. Suitable for batteries with the number of cells from 1 to 8.It recognizes the battery status and automatically stops the charging process when the battery is full. NOTICE! Charges are covered only by starting warranty.
Z Tactical Peltor Headset Cable & PTT Z113 (U94) PTT Military Standard Version
Great replica in scale 1: 1 of one of the most popular shotgun, used by civilians, police or military. The replica has been produced by CYMA specialy for the airsoft market. Just like in other replica from that producer, rifle has a reliable mechanism in this case a pump action system powered by a spring. This Shotgun is present in 2 category: low-budget...
Paracord made of 100% nylon with iron buckle Length: 20 cm.
Metal trigger pin for M4, M16 series and similar replicas. It may require shortening to fit perfectly with your replica. Weight: 2 g Material: steel Length: 29 mm
A small 7.2V 500mAh. battery for electric airsoft handguns like G18C, CZ99 and STI Classic, also it fit CYMA electric pistols. CM030, CM121, CM122, CM123, CM125, CM126 NOTICE! Batteries are covered only by starting warranty.
Material: metal Color: black Length: 135 mm Height: 85 mm
Inlet Valve
An inlet valve made from stainless steel, designed for most gas magazines and 40mm grenades.
![M4 AEG WITH KEYMOD CM.515 Tan [CYMA]](https://airsoftguns.ie/17296-home_default/m4-aeg-with-keymod-cm515-tan-cyma-.jpg)
