The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Arcturus LWT MK-II CQB 10"
The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass.
The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device, manipulators (bolt-catch, selector, magazine catch), reloading levers were made of aluminium . PA66 nylon is used for the barrel with a 10-inch-long M-LOK handguard. On the handguard we additionally find RIS rails. The RIS rails are also nylon: both on the handguard and on the barrel. There is an ergonomic pistol grip, which has a rough surface, a magazine, an ergonomic, adjustable buttstock, which accommodates the battery and folding sights.
Arcturus LWT MK-II CQB 10" AEG SPORT SE™ airsoft Carbine
The airsoft carbine from Arcturus model LWTMK-II CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass.
The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, the dummy slide were made from steel . At the same time, the manipulators (bolt-catch, selector, magazine catch), reloading levers and the stock guide were made from aluminium .
PA66 nylon is used for the 8.5" long M-LOK/RIS compatible barrel and handguard. The RIS rails are also nylon: both on the handguard and on the body. There is an ergonomic pistol grip, which has a rough surface, a magazine, an ergonomic, adjustable buttstock that accommodates the battery and folding sights.
The replica is lightweight, well-fitted and balanced, its interior provides very good performance in its factory configuration and a good base for tuning.
Inside the replica we find, among others:
- CNC steel cylinder
- Gearbox V2 with quick-change spring system
- Polymer spring guide
- Reinforced Gearbox front
- Polymer nozzle
- 23T motor (ferrite)
- 18:1 gears
- Hop-up rotary unit
- SE optical control system
The model belongs to the SE or Standard Enhanced series, which means that the replica has been equipped with a programmable optical control unit.
Functions of the SE ETU optical system:
- Pre-Cocking (2 stages)
- Active Break (2 stages)
- Progressive trigger
- Programmable fire modes
- Binary trigger with Ramping
- Low Battery Protection
- Electronic fuse
Battery included; No
Blow Back; No
Colour; Black/Tan
Product length [cm]; 85.50
Product weight [g]; 2150
Power supply; Electric
Muzzle velocity [FPS]; ~328
Fire mode; Full-auto
Adjusted burst; Semi-auto
Gearbox version; Gearbox v2
Package include:
Cleaning rod
Hi-Cap Magazine
Patch
Replica
Allen key
Iron sights
Small Tamyia - Deans adapter
Vertical Grip
Package exclude:
The set does not include the battery nor charger
H.M.G. PARA Machinegun replica Classic infantry support machinegun modified for light inf. or paratroopers, lightweight and first of all very mobile for it”s category – thanks to which it”s easier to handle and carry in comparison to his standard issue cousins. The popular and approved by the community design will prevail in every situation. This replica...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
This replica of M16A1 features a special triangular shaped handguard, pistol grip, fixed stock, three prong flash hider, forward assist, fixed carry handle upper with rear iron sight making it an authentic looking M16A1 used in the Vietnam War. Receivers, carry handle with rear sight, flash hider, trigger guard, safety lever, front sight, forward assist,...
Historical Russian repeating airsoft gun rifle Mosin-Nagant model m1938 was manufactured by S&T Armament (Smart Team). It was a new gun introduced to the artillery, rear and auxiliary formations. It is recognizable because of the barrel shortened by 222mm. During World War II, it turned out that carbines were better suited as infantry weapons than...
In 1930, there was an advanced type Mosin Nagant was developed and named M1891/30 Rifle. The Mosin Nagant was the most popular rifle in the world and used by Soviet Army during WWII but stopped production in 1948 since the design was getting old. However it has been used in some countries like Turkey, former East Germany and even showed up in Korean War...
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
V2 gearbox frame with quick spring change system, processor unit with built - in MOSFET system. Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of...
Replica of the new series of assault rifles from CYMA, This carabine are produce in different specification that include civil or military. The lower receiver, the upper receiver, the stock tube, the external barrel, the fire selector, the magazine release button, the trigger , the charging handle and the front and rear sigth are made in aluminium, that...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
The legendary E&L brand, whose excellent replicas of Russian assault rifles (to name just them!) have won the hearts of airsoft players from around the world, returns with the E&L Essential series. Replicas from this series are less expensive than those of the previous generation while maintaining their quality. Thanks to this, E&L products...
1/1 Scale High Power Assembled Electric Powered Airsoft AEG. The replica is made of metal and ABS plastic and is made by the JG company. The inner barrel, the iron aiming sights, the magazine and the trigger are made of metal while as the body, the stock and the pistol grip are made of durable ABS plastic. This combination which is also commonly practiced...
Arcturus LWT MK-I CQB 10" The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass. The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device,...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
The Sten 058 MK II SMG by [AGM] resurrects a significant chapter of world history. The Sten, a submachine gun utilized by the British Army during World War II, is notable for its straightforward yet sturdy design. This firearm was developed to rapidly replenish the British Army's substantial equipment losses following the evacuation from Dunkirk, employ...
The Arcturus company is innovating the airsoft market for a long time with new products and the desire to expand its best products with better technical solutions. The AT-AK12U-PE is an improved version of the AT-AK12-PE replica of the Russian automatic rifle of the new Arcturus PE (Performance Enhanced) series with a 2-shot mode b > and new tactical...
Arcturus LWT MK-II CQB 10"
The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass.
The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device, manipulators (bolt-catch, selector, magazine catch), reloading levers were made of aluminium . PA66 nylon is used for the barrel with a 10-inch-long M-LOK handguard. On the handguard we additionally find RIS rails. The RIS rails are also nylon: both on the handguard and on the barrel. There is an ergonomic pistol grip, which has a rough surface, a magazine, an ergonomic, adjustable buttstock, which accommodates the battery and folding sights.
![M4 AEG WITH KEYMOD CM.515 Tan [CYMA]](https://airsoftguns.ie/17296-home_default/m4-aeg-with-keymod-cm515-tan-cyma-.jpg)
![M4 CM.068C Full Metal [CYMA] Key-Mod AEG Rifle](https://airsoftguns.ie/16222-home_default/m4-cm068c-full-metal-cyma-key-mod-aeg-rifle.jpg)
![M4 CM.507 [CYMA]](https://airsoftguns.ie/11692-home_default/m4-cm507-cyma-.jpg)
![M4 CM.518 - Black [CYMA] Airsoft rifle](https://airsoftguns.ie/16455-home_default/m4-cm518-black-cyma-airsoft-rifle.jpg)
