Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
A series of American assault rifle replicas manufactured by CYMA. The replica is characteristic for its beneficial quality to price ratio known from previous products from the company.
Replicas were made fully compatible with the Tokio Marui standard and equipped with metal Hop-Up chambers.
Particular elements of the replica were made in a way facilitating a good alignment of internal parts as well as the appropriate placement of electronic and mechanical parts of the internal construction.
|
Diameter 5.95mm +/- 0.01mm. Highest Quality which affects effective accuracy, good shot grouping, long range and minimal jamming. Suitable for 6.01mm precision barrels. 6MM AIRSOFT BB [KILO9] |
0,20G BIODEGRADABLE PRECISION AIRSOFT BB - 5000RD
€14.95 |
|
|
|
400rd XL Size BB Speed Loader Clear or Tinted
€8.95 |
|
|
KILO9 Professional 0,20g -1kg (5000rds) Highest Quality which affects effective accuracy, good shot grouping, long range and minimal jamming. Suitable for 6.01mm precision barrels. Color: white Weight: 0,20g Manufacturer: KILO9 |
0,20g Precision 6mm Airsoft BB - 5000rd [KILO9]
€12.95 |
|
|
Design to install on Rear Retractable Stock, Sling is elastic for Close Quarter Battle use, Snap Hook Rifle Sling with snap on clip, Suitable for all rifle with Sling Swivel or hook, Both left & right handed compatible |
Elastic Bungee Snap Hook CQB Rifle Sling OD
€8.95 |
A series of American assault rifle replicas manufactured by CYMA. The replica is characteristic for its beneficial quality to price ratio known from previous products from the company.
Replicas were made fully compatible with the Tokio Marui standard and equipped with metal Hop-Up chambers.
Particular elements of the replica were made in a way facilitating a good alignment of internal parts as well as the appropriate placement of electronic and mechanical parts of the internal construction.
The replica was made of metal and polymer. Polymer parts include: the receiver, handguard, foldable stock and the pistol grip. Metal parts include: the barrel, magazine and remaining, miscellaneous parts of the replica. The implementation of a metal gearbox in the replica significantly prolongs its operation time rather than in the case of the use of parts made entirely of polymer. Thanks to the metal gearbox the replica can be subjected to numerous alterations that aim to improve its reliability as well as power.
The implementation of a foldable stock enables the adaptation of the replica practically to any User and its use in various situations and conditions. The top RIS rail enables a seamless attachment of a red dot sight or a scope.
The carbine features an adjustable Hop-Up system that can be accessed by pulling back the charging handle, which opens the shell ejection window flap, revealing the adjustment knob.
Length: 765 - 845 mm
Weight: 2170 g
Color: Black
Material: Metal + polymer
Muzzle Velocity: ~328 FPS
Warranty: 1month
Gearbox version: v2 Gearbox
Type of fire: Single, auto
Lenght [mm]: 765-845
Inner barrel length [mm]: 390
Weight [g]: 2170
Battery Capacity [mAh]: 1100
Magazine type: Hi-Cap magazine
Magazine capacity [pcs]: 350
Hop-Up: Yes, adjustable
Blow Back: No
Made of: Metal + plastic
Battery included: Ni-MH
Battery Voltage [V]: 8,4
Propulsion / Powered by: Electric
Barrel thread type: 14mm CCW
The set includes:
- replica
- magazine
- cleaning rod
- charger
- battery
FAMAS F1 Assault Rifle Replica A replica made mainly from elastic and durable nylon polymer. Elements such as the barrel, bipod, trigger, screws, pins and internal elements were made from metal. The set includes a metal Hi-Cap magazine with a capacity of up to 300 BBs, which allows for longer firing.
Replica of the new series of AK assault rifles, these rifles are produced in many specifications that include civil or military. Receiver, receiver cover, external barrel, safety lever, rear sight base, trigger, gas port block, gas cylinder, bolt carrier, front sight base and muzzle brake are made of steel and aluminium, that made the replica is more...
Includes Free battery and charger. Functionally equivalent to the standard Steyer AUG rifle, the ASG/JG AUG A1 military version comes in a green finish and with a 1.5x standard scope.
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
Arcturus LWT MK-II CQB 10" The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass. The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device,...
CM.033 is a replica of submachine gun made famous in the days of Prohibition era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. Butt stock, rear grip, and fore grip is stylized on wood made of plastic. Magazine, frame group, bolt, barrel and receiver are made of metal. The set does not...
The A2 version of the Steyr AUG rifle is the civilian version of the AUG series licensed by Steyr Mannlicher, Austria. On the A2 you get an accessory rail where you can mount your preferred aiming device. Like on the A1 version the front grip is collapsible and the internals are metal constructed. Free battery and free charger
Battery with charger inc. The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped with metal...
TR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox Firearms. The ambidextrous fire selector makes the...
Replica of a new series of low-budget rifles - CYMA. The rifle offers the same things as metal parts (eg, body, handguard, front / rear sights) , buffer tube, flash hider, magazine) allowed reduced the price. Now, every beginner will be able to afford the ASG with a reliable replica for a lower price.
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, sights, stock,...
Very well made of G36C by CM. It is replica of compact assault rifle that is commonly known in the world. Original firearm is used by special forces like: SAS, GROM, Bundeswehr, GOE, Spanish Air Force and many more. It also popular in the airsoft sport environment because of relation between price and realization. The set does not include a battery or a...
The SC-02 rifle airsoft gun is made of ABS and metal elements. The RIS rails, sights, magazine, barrel and some of the elements of the body are made of metal – of CNC machined aluminum to be precise. The body and the folding stock of the airsoft gun are made of ABS. The material is a durable nylon fiber, which is exactly the same, as the one used for the...
A replica of the ARMY ARMAMENT company which is famous for the quality of its products and attention to detail. The replica is made of aluminium alloy and ABS. The bed was made of high quality plastic. Just like in the firearm, a two-stage trigger was used, pulling the trigger halfway allows single shot, while pulling the end its go to auto fire. The...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
Replica of the new series of assault rifles from CYMA, This carabine are produce in different specification that include civil or military. The lower receiver, the upper receiver, the stock tube, the external barrel, the fire selector, the magazine release button, the trigger , the charging handle and the front and rear sigth are made in aluminium, that...
A series of American assault rifle replicas manufactured by CYMA. The replica is characteristic for its beneficial quality to price ratio known from previous products from the company.
Replicas were made fully compatible with the Tokio Marui standard and equipped with metal Hop-Up chambers.
Particular elements of the replica were made in a way facilitating a good alignment of internal parts as well as the appropriate placement of electronic and mechanical parts of the internal construction.