The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Arcturus LWT MK-I CQB 10"
The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass.
The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device, manipulators (bolt-catch, selector, magazine catch), reloading levers were made of aluminium . PA66 nylon is used for the barrel with a 10-inch-long M-LOK handguard. On the handguard we additionally find RIS rails. The RIS rails are also nylon: both on the handguard and on the barrel. There is an ergonomic pistol grip, which has a rough surface, a magazine, an ergonomic, adjustable buttstock, which accommodates the battery and folding sights.
Description
Arcturus LWT MK-I CQB 10" AEG SPORT SE™ airsoft Carbine
The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass.
The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device, manipulators (bolt-catch, selector, magazine catch), reloading levers were made of aluminium . PA66 nylon is used for the barrel with a 10-inch-long M-LOK handguard. On the handguard we additionally find RIS rails. The RIS rails are also nylon: both on the handguard and on the barrel. There is an ergonomic pistol grip, which has a rough surface, a magazine, an ergonomic, adjustable buttstock, which accommodates the battery and folding sights.
The replica is lightweight, well-fitted and balanced, its interior provides very good performance in its factory configuration and a good base for tuning.
Inside the replica we will find, among others:
- Steel cylinder
- Gearbox V2 with quick-change spring system
- Polymer spring guide
- Reinforced Gearbox front
- Polymer nozzle
- 23T motor (ferrite)
- 18:1 gears
- Hop-up rotary unit
- SE optical control system
The model belongs to the SE or Standard Enhanced series, which means that the replica has been equipped with a programmable optical control unit.
Functions of the SE ETU optical system:
- Pre-Cocking (2 stages)
- Active Break (2 stages)
- Progressive trigger
- Programmable fire modes
- Binary trigger with Ramping
- Low Battery Protection
- Electronic fuse
Battery included; No
Blow Back; No
Colour; Black/Tan
Product length [cm]; 82
Product weight [g]; 2115
Power supply; Electric
Muzzle velocity [FPS]; ~328
Fire mode; Full-auto
Adjusted burst; Semi-auto
Gearbox version; Gearbox v2
Package include:
Cleaning rod
Hi-Cap Magazine
Patch
Replica
Allen key
Iron sights
Small Tamyia - Deans adapter
Package exclude:
The set does not include the battery nor charger
Replica of the new series of assault rifles from CYMA, This carabine are produce in different specification that include civil or military. The lower receiver, the upper receiver, the stock tube, the external barrel, the fire selector, the magazine release button, the trigger , the charging handle and the front and rear sigth are made in aluminium, that...
Very well made replica of G36K by [WORKS J.G.]. It is replica of assault rifle that is commonly known in the world. Original firearm is used by special forces like: SAS, GROM, Bundeswehr, GOE, Spanish Air Force and many more. It also popular in the airsoft sport environment because of relation between price and realization. The body is made from high...
The CYMA AK74M is the latest addition to the Cyma's AK line up of AEG. The receivers are solid metal and the stock/pistol grip/hand guards are made of a durable ABS plastic. In addition to the fantastic construction of the body CYMA has added the full size side folding stock for easy storage and maneuverability. The internals are the same as the other...
Arcturus LWT MK-II CQB 10" The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass. The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device,...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
A replica of the assault rifle which during the Vietnam War was a standard issue weapon of the American troops. The replica was made of metal elements and of ABS plastic. The barrel guard, and the stock which holds the battery were made of plastic. The rest of the elements such as the receiver, outer barrel and the cocking handle were made of metal. The...
The Arcturus company is innovating the airsoft market for a long time with new products and the desire to expand its best products with better technical solutions. The AT-AK12U-PE is an improved version of the AT-AK12-PE replica of the Russian automatic rifle of the new Arcturus PE (Performance Enhanced) series with a 2-shot mode b > and new tactical...
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
Replica of the new series of assault rifles from CYMA, This carabine are produce in different specification that include civil or military. The lower receiver, the upper receiver, the stock tube, the external barrel, the fire selector, the magazine release button, the trigger , the charging handle and the front and rear sigth are made in aluminium, that...
S&T LEE ENFIELD SMLE NO. 1 MK III AIRSOFT RIFLE IN REAL WOOD This S&T reproduction is a fantastic replica of the famous SMLE, with a real wood stock, Iron Cylinder and almost full metal construction this rifle comes in at 3.5kg, that is less than 500grams lighter than the real rifle. S&T have decided to go with the slightly later square...
Battery with charger inc. The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped with metal...
TR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox Firearms. The ambidextrous fire selector makes the...
Very well made of G36C by CM. It is replica of compact assault rifle that is commonly known in the world. Original firearm is used by special forces like: SAS, GROM, Bundeswehr, GOE, Spanish Air Force and many more. It also popular in the airsoft sport environment because of relation between price and realization. The set does not include a battery or a...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
The WE09-1 is a replica of the iconic AK rifle, crafted and manufactured by the renowned Russian firearms manufacturer. It represents a modern adaptation within the lineage of AK rifles. This version is designed with a shorter barrel length, tailored specifically for VDV troops. Engineered to fire the 5.45×39mm cartridge, this Russian assault rifle...
Arcturus LWT MK-I CQB 10"
The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass.
The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device, manipulators (bolt-catch, selector, magazine catch), reloading levers were made of aluminium . PA66 nylon is used for the barrel with a 10-inch-long M-LOK handguard. On the handguard we additionally find RIS rails. The RIS rails are also nylon: both on the handguard and on the barrel. There is an ergonomic pistol grip, which has a rough surface, a magazine, an ergonomic, adjustable buttstock, which accommodates the battery and folding sights.
![M4 CM.068D Full Metal [CYMA] Key-Mod AEG Rifle](https://airsoftguns.ie/16478-home_default/m4-cm068d-full-metal-cyma-key-mod-aeg-rifle.jpg)
![G36K 608-2 [J.G.WORKS]](https://airsoftguns.ie/17677-home_default/g36k-608-2-jgworks-.jpg)
![M4 CM.068B Full Metal [CYMA] Key-Mod AEG Rifle](https://airsoftguns.ie/16226-home_default/m4-cm068b-full-metal-cyma-key-mod-aeg-rifle.jpg)
![M4 CM.612 - DARK EARTH [CYMA]](https://airsoftguns.ie/12531-home_default/m4-cm612-dark-earth-cyma-.jpg)
