The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
A replica of one of the most popular rifles in the world produced by a Chinese company, known for its reliability on the ASG market.
Inside there is a reinforced ver.3 gearbox, steel gears are mounted on reinforced 7mm bearings.
The spring guide is reinforced (metal), polymer piston has metal teeth.
A huge advantage is the silent piston and cylinder head set, made of aluminum and covered with a blue anode,the piston head has bearing.
The replica has a powerful engine with increased torque equipped with neodymium magnets.
The way how gearbox is functioning will surprise a user.
All parts and accessories of other manufacturers are fully compatible with this model, which is very important when you planing upgrade.
The replica does not have a charger and a battery in the set.
A replica of one of the most popular rifles in the world produced by a Chinese company, known for its reliability on the ASG market.
Inside there is a reinforced ver.3 gearbox, steel gears are mounted on reinforced 7mm bearings.
The spring guide is reinforced (metal), polymer piston has metal teeth.
A huge advantage is the silent piston and cylinder head set, made of aluminum and covered with a blue anode,the piston head has bearing.
The replica has a powerful engine with increased torque equipped with neodymium magnets.
The way how gearbox is functioning will surprise a user.
All parts and accessories of other manufacturers are fully compatible with this model, which is very important when you planing upgrade.
Weight: 2920 g
Magazine model: ABS
Bearings type: steel sliding
Gearbox version: 9 mm
Bearings diameter: 7 mm
Magazine model: hi-cap
Accumulator type: NiMH
Muzzle velocity: ~328fps
Accumulator type: stick
Accumulator connector type: small Tamiya
Accumulator included in set: NO
Diameter of Internal barrel: 6,03 mm
Magazine capacity: 525 BBs
Material: aluminum, steel
Color: black
Length: 950 mm
Muzzle energy: ~1J
Length of internal barrel: 490 mm
Fire mode: auto, single
Set Included:
* replica
* magazine hi-cap 525rd
The replica does not have a charger and a battery in the set.
NOTICE! Replica have a unique serial number!
Warrnig!
Adjustment rear sight only like in picture (green colour).
We don`t response for damages caused for bad adjustment (red colour)
Every replica pass initial check up.
It`s being checked and overshooted on XCORTECH X3200 chronograph.
The recommended battery with the highest safe voltage - 9.6V NiMH is recommended, and in the case of Li-Po / Li-Ion - 7.4V.
Otherwise, the replica may be damaged, which will not be covered by warranty repair!
Remember that the warranty covers only replicas in which the spring was not replaced with a stronger one, and no batteries with a higher voltage than recommended were used.
If you decide to reduce the power, be sure to not use batteries with a too high voltage - 9.6V NiMH is recommended, and in the case of Li-Po / Li-Ion - 7.4V.
Otherwise, the replica may be damaged, which will not be covered by warranty repair!
Remember that the warranty covers only replicas in which the spring was not replaced with a stronger one, and no batteries with a higher voltage than recommended were used.
Discover the Power of the WE23-S Minigun - a revolutionary five-barrel Gatling-style replica. It delivers dynamic action and provides team support. Compact design, durable construction, versatile features, and an astonishing firing rate of up to 36 rounds per second - it's a new level of ASG gameplay. Get ready for an exceptional experience! Please...
The CYMA AK74M is the latest addition to the Cyma's AK line up of AEG. The receivers are solid metal and the stock/pistol grip/hand guards are made of a durable ABS plastic. In addition to the fantastic construction of the body CYMA has added the full size side folding stock for easy storage and maneuverability. The internals are the same as the other...
CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers. Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail...
AGM MP056B is an authentic replica of the German StG 44 (MP 44) automatic rifle, superbly crafted with a full-metal construction and real wood furniture, it is sure to impress both competitive airsoft players and reenactors.Primarily made of aluminum and steel, not only does it have an unparalleled build quality, but it is also highly reliable, durable,...
Arcturus LWT MK-I CQB 10" The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass. The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device,...
The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
The legendary E&L brand, whose excellent replicas of Russian assault rifles (to name just them!) have won the hearts of airsoft players from around the world, returns with the E&L Essential series. Replicas from this series are less expensive than those of the previous generation while maintaining their quality. Thanks to this, E&L products...
V2 gearbox frame with quick spring change system, processor unit with built - in MOSFET system. Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of...
1/1 Scale High Power Assembled Electric Powered Airsoft AEG. The replica is made of metal and ABS plastic and is made by the JG company. The inner barrel, the iron aiming sights, the magazine and the trigger are made of metal while as the body, the stock and the pistol grip are made of durable ABS plastic. This combination which is also commonly practiced...
G&G CM16 Raider M4 RIS airsoft rifle (Black) - Fantastic starter rifle for the absolute beginner, - Even if your not so tiny, this is still a full sized M4
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
Replica of the new series of assault rifles from CYMA, This carbine are produce in different specification that include civil or military. The lower receiver, the upper receiver, the stock tube, the external barrel, the fire selector, the magazine release button, the trigger , the charging handle and the front and rear sight are made in aluminium, that...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
0447A one of the most popular replicas in the world of ASG manufactured by the Chinese company [WORKS J.G.]. Due to extensive experience in the production of ASG replicas, the company [WORKS J.G.] gives us a very well-made carbine. The replica is made of aluminum alloy and ABS. The replica's body was made of high-quality plastic. [WORKS J.G.] tried to...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
Arcturus LWT MK-II CQB 10" The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass. The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device,...
A replica of one of the most popular rifles in the world produced by a Chinese company, known for its reliability on the ASG market.
Inside there is a reinforced ver.3 gearbox, steel gears are mounted on reinforced 7mm bearings.
The spring guide is reinforced (metal), polymer piston has metal teeth.
A huge advantage is the silent piston and cylinder head set, made of aluminum and covered with a blue anode,the piston head has bearing.
The replica has a powerful engine with increased torque equipped with neodymium magnets.
The way how gearbox is functioning will surprise a user.
All parts and accessories of other manufacturers are fully compatible with this model, which is very important when you planing upgrade.
The replica does not have a charger and a battery in the set.
![M4 CM.612 - DARK EARTH [CYMA]](https://airsoftguns.ie/12531-home_default/m4-cm612-dark-earth-cyma-.jpg)
![M4 CM.068B Full Metal [CYMA] Key-Mod AEG Rifle](https://airsoftguns.ie/16226-home_default/m4-cm068b-full-metal-cyma-key-mod-aeg-rifle.jpg)
![M4 CM.513 [CYMA]](https://airsoftguns.ie/20478-home_default/m4-cm513-cyma-.jpg)
![CM.605 - Black [CYMA]](https://airsoftguns.ie/19946-home_default/cm605-black-cyma-.jpg)
