The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 9kg
Price
Price
€1.00 - €630.00
Subcategories
There are 460 products.
Active filters
Name LiPo 7,4V 2200mAh 20/40C Cell Type LiPo Battery Capacity [mAh] 2200 Battery Voltage [V] 7,4 Plug Type DEAN Battery size [mm] 15x35x103 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Set of 2.8x0.5 Flat Connectors [Female + Male]Two sets of flat connectors intended for installation in wiring or the motor of an AEG replica. The set includes 2 pairs of heat-shrink tubings.
Product Information Gear sector chip which fits the space better between sector gear and tappet plateBasically this upgrade part can enable the tappet plate (air nozzle) to delay it's releasing time Enables reliable BB Feeding in a modified high performance AEGEven though it is such small upgrade gearbox part, it will guarantee an AEG's reliable...
Battery 8.4V 1600 mAh New technologies have been developed in Ni-MH batteries, thanks to which higher efficiency and high voltage can be obtained. Ni-MH batteries form groups of batteries that are powerful, energy density, which is why at the same performance they have a greater capacity than batteries made in higher technologies. The package made of...
0447A one of the most popular replicas in the world of ASG manufactured by the Chinese company [WORKS J.G.]. Due to extensive experience in the production of ASG replicas, the company [WORKS J.G.] gives us a very well-made carbine. The replica is made of aluminum alloy and ABS. The replica's body was made of high-quality plastic. [WORKS J.G.] tried to...
The sniper rifle replica is made of metal and high quality plastic. The metal made elements are as follows: the minor elements and also the barrel, the bolt carrier, the cocking handle, the RIS rail and the trigger. Scope and bipod NOT INCLUDED. Please Choice separately from list below
A replica of the assault rifle which during the Vietnam War was a standard issue weapon of the American troops. The replica was made of metal elements and of ABS plastic. The barrel guard, and the stock which holds the battery were made of plastic. The rest of the elements such as the receiver, outer barrel and the cocking handle were made of metal. The...
The P361 pistol replica was made of metal and plastic. It's the models of the pistol that set out for the first adventures in the ASG world. A replica of good quality gauges in terms of price, reliability and accuracy of the presented model.
Full metal shotgun powered by Green Gas with a muzzle velocity of 300-328 fps (measured on 1 bb). Equipped with a fixed hop-up, 3 inner barrels, switchable fire mode of 3 or 6 bbs at once and gas cartridge stored in the stock or pistol grip (depending on the model). NOTE! You can use shotshells in the Marui standard like CYMA shotshells. The set...
Accumulator type: metal Accumulator connector type: T-connerctor Accumulator cells type: lithium Accumulator capacitance: 1500 mAh Length: 125 mm Width: 20 mm Accumulator voltage: 11,1 V NOTICE! Batteries are covered only by starting warranty.
Browning Hi Power MK III Pistol Replica A replica of the Browning gas-powered pistol, derived from a construction designed by John Browning. Very good workmanship and fitting of the parts guarantee trouble-free and precise work of the replica. The reasonable muzzle velocity makes this replica a perfect choice for a sidearm, used indoors or at short...
Black Texture ABS Body and Full Metal Receiver With Barrel, Muzzle Power reach ~320FPS Velocity (Air Cocking), Full Metal Magazine Accommodate 25+1 Rounds of 6mm Plastic Pellet. Scope and bipod NOT INCLUDED. Please Choice separately from list below
Adapter cable - large male - small female
Inject valve for Green Gas powered magazines used in WE/KJW and Socom Gear pistol and carbine replicas. Overall length: 13 mm Tip diameter: 4.2 mm Thread diameter: 4.9 mm Tube diameter: 4 mm Weight: 1 g Manufacturer: Arma Tech
Great replica in scale 1: 1 of one of the most popular shotgun, used by civilians, police or military. The replica has been produced by CYMA specialy for the airsoft market. Just like in other replica from that producer, rifle has a reliable mechanism in this case a pump action system powered by a spring. This Shotgun is present in 2 category: low-budget...
FAMAS F1 Assault Rifle Replica A replica made mainly from elastic and durable nylon polymer. Elements such as the barrel, bipod, trigger, screws, pins and internal elements were made from metal. The set includes a metal Hi-Cap magazine with a capacity of up to 300 BBs, which allows for longer firing.
PKM machinegun replica The long awaited model of the universal PKM machinegun made by the A&K company was made of steel and aluminum. The bolt chamber, the chamber cover, the bipod, the carrying handle and the box magazine were made of steel, while as the rest of the elements, such as the outer barrel, the base of the front iron aiming sight, the gas...
SHS Airsoft Electric Gun Upgrade Parts Series, 100:300 Gear Set, Low Noise Torque Type. Can be used at version 2 and version 3 gearbox.
Cell Type LiPo Battery Capacity [mAh] 2000 Battery Voltage [V] 7,4 Plug Type DEAN Battery size [mm] 10x21x126 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Quick and easy to use charger with balancer. After connection to power one of three LED s will flask. When charging is completed the one of three LED s will light constant. NOTICE! -Charges are covered only by starting warranty. - Can be yellow or blue (pictures)
