The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 9kg
Price
Price
€0.00 - €630.00
Subcategories
There are 408 products.
Active filters
Precisely made, steel, CUT-OFF lever dedicated to V2 - M4 type gearboxes. The installation of this component ensures reliable operation of the gearbox. CAUTION!If you decide to personal installation gearbox parts as gears, pistons, springs, etc., you must remember that your warranty will be canceled. Weight: 5 g Material: steel Package quantity: 1 pcs.
Shim Set: 6x 0,2mm, 6x 0,3mm, 6x 0,5mm
High-quality polymer tappet plate. It is the ideal solution if the tappet plate in your replica is damaged or worn out. CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be canceled.
Teeth are made with high precision providing faultless work of gearbox mechanism. it`s great for rate of fire modifications. It`s designed for v.2 and v.3 gearbox. Mechanism works well on not harder spring than 130 m/s.
A hop-up rubber specially created for demanding shooters. Suitable for VSR-10 replicas and clones (VSR10,MB03 ...) for Marui, WE, KJW - 1911 gas pistols, Hi Capa, SIG, KP05, KP06 ... Thanks to its innovative design, it provides the perfect position of the bb before the shot, which guarantees perfect curling and repeatability of results. The specially...
Model Number 8s voltage display, Display Type Analog and Digital, Measuring Range 0.5-4.5v, Accuracy Class +-0.01v, built-in buzzer alarm, function low voltage checker for airsoft lipo (Lithium), cell count 2-8s
SHS Piston Full Steel 7 Teeth for Gearbox V2, V3
UPGRADE SET FOR L96 - MB01, MB05, MB06 AND MB08 [WELL]- hard aluminium piston- Spring 500 fps- hard aluminium spring guide with bearningCAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be cancelled.
Arcturus LWT MK-I CQB 10" The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass. The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device,...
G36 Replica Pin Steel assembly pin for G36 replicas.
Set include 6pcs.
Double Seal Purpose: M4 Replicas Material: Aluminium Length: 21,4mm Manufacturer: Super Shooter/SHS
X-ASR is the world’s first 4th generation MOSFET protected against reverse polarity. It saves space, time and money because additional regular fuse is no longer needed. Acting as an electronic guard, X-ASR improves your AEG’s safety and durability through conformal coating and self-test with 2 LEDs. Although designed for up to M120 springs, in full auto...
The latest version of the popular CYMA AEP electric pistols. The replica has a MOSFET system (battery and switch protection), detachable Li-Po battery, upgraded gearbox with steel bearings and low-resistance wiring. Durable steel gears ensure trouble-free operation of the mechanism. Thanks to these upgrades we got an extremely durable pistol with a quick...
WELL Trigger Assembly Suitable for airsoft Type 96 series by WELL MB-01 / SD96 / UTG Type 96 Shadow Ops / Bravo / Double Eagle / Maruzen and other compatible airsoft bolt action sniper rifles. Steel made upgrade part.
Switch V.2 NB0027 A basic replacement of the trigger block - this piece consists of just the sliding contact & the trigger contact block; there is no wiring included. This is only for V2 gearboxes e.g. MP5, M4, M16 etc.
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
ARROW DYNAMIC AD Classic 6mm Bushing-- Full Metal Construction-- Design with 3 oil grooves to effectively increase the lubrication and wear resistance
Utility rope 3 mm - Made of 100% nylon - Length: 10 m
![TAPPET PLATE V3 [POINT]](https://airsoftguns.ie/17908-home_default/tappet-plate-v3-point-.jpg)
