The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 1.1kg
Price
Price
€1.00 - €165.00
Subcategories
There are 222 products.
6,03 steel precision inner barrel - 300 mm Precision inner barrel with a length of a 300 mm and 6,03mm diameter manufactured by PPS Airsoft. Precision barrel adds a lot to accuracy, range and repeatablitity of a shots. Precision barrel requires high quality BB"s used.
TITAN V2 Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced or Complete set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require...
Suitable for M4/M16 Series Airsoft Electric Gun AEG RifleSteel Bolt Catch Release Steel Construction Design for Replace The Original Bolt Catch Release
This is a precision machined SHS Steel Cut Off Lever for Version 3 metal gearbox AEGs. This Steel Cut Off Lever should fit in most Version 3 metal gearboxes without any modification. The steel construction makes this cut off lever twice as strong as normal zinc alloy cut off levers. The SHS Steel Cut Off Lever is extremely sturdy and precisely machined,...
The ULTIMATE® air nozzle have built-in rubber seal to prevent loss of compression from the nozzle. All ULTIMATE® nozzles follow TM standards. Nozzle, air, MP5-K/PDW series
Weight: 5 g Material: steel code BD1077
Element Hand Grip Motor cover for M4, AEGSpecial patch end-screw eliminates the troublesome to replace your motor Essential part for upgrading your Airsoft Electric Gun AEG Rifle
Product Information Gear sector chip which fits the space better between sector gear and tappet plateBasically this upgrade part can enable the tappet plate (air nozzle) to delay it's releasing time Enables reliable BB Feeding in a modified high performance AEGEven though it is such small upgrade gearbox part, it will guarantee an AEG's reliable...
UPGRADE SET FOR VSR10 - MB02/03 SERIES [WELL] - hard aluminium piston - Spring 500 fps - hard aluminium spring guide with bearing - 45° piston CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be cancelled.
G&G Green Hop Up Rubber (40 degree). The Hop-Up rubber was made of silicon thanks to which is keeps it properties even in low temperatures due to the fact that it does not get stiff just like in the case of regular rubber. It performs perfectly both in typical conditions as in negative temperatures – it keeps it properties even in the temperatures...
The USB-Link is used for connecting GATE TITAN and ASTER with PC, Mac or Android devices. Kit contents: USB-Link for GCS app USB-C cable [0.6 m / 1 ft 11 in] Micro-USB cable [0.6 m / 1 ft 11 in] 'Troubleshooting' Card Quickstart Guide
NanoAAB is the latest, 3rd generation MOSFET with active brake. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and the most reliable MOSFET with active brake in the market. Thanks to its special coating, it is resistant to atmospheric conditions.
Mechanism works well on not harder spring than 150 m/s. All gears are fabricated on CNC machines.
Tappet plate for V.2 gearbox
SHS 2nd Sear for Marui L96 AWS Sniper (Steel)
NanoASR is the latest standard third generation MOSFET. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and most reliable MOSFET in the market. Thanks to its special coating, it is resistant to atmospheric conditions.
Precisely made 0,25g pellets that glow in the dark. After illumination there is possibility to track the pellet even in complete darkness. This ammunition was made by the well-known Taiwanese company BLS. These BB are very well made, we recommend them to each player.
Deep Fire Enlarged Metal Nozzle Essential part for upgrading your Airsoft AEG Tighter sealed air nozzle ensures more barrel exit muzzle velocity This Oil Lubricated Air Seal Nozzle increase the air tightness of the cylinder Direct replace the original air nozzle of Airsoft Electric Gun As always, upgrading AEG require necessary skill & technique to...
Inject valve for Green Gas powered magazines used in WE/KJW and Socom Gear pistol and carbine replicas. Overall length: 13 mm Tip diameter: 4.2 mm Thread diameter: 4.9 mm Tube diameter: 4 mm Weight: 1 g Manufacturer: Arma Tech
Purpose: M4 Replicas Material: Aluminium Length: 20.90mm Manufacturer: Cyma
