The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 9kg
Price
Price
€1.00 - €630.00
Subcategories
There are 798 products.
Active filters
Inlet Valve An inlet valve made from stainless steel, designed for most gas magazines and 40mm grenades.
A high-quality spring designed to improve performance in the replica. Made of high-quality, hardened steel. Can work with Cyma 701, MB03, BAR10. Outer diameter -11,1mm, internal diameter-8,2mm. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working,...
Ballistic goggles from the American manufacturer PYRAMEX, provide eye protection. They have very durable lenses with high transparency and ergonomic shape. Ballistic goggles adhere to the face very accurately, providing eye protection. Designed for slimmer faces, the I-Force Slim is about 6% smaller than the I-Force. The sporty, lightweight design...
Plate Carrier Harnes - camoflage Olive - OD (green), All pouches fixed with molle system. None of them is permanently attached to the vest and may be changed if necessary.
Airsoft half face Protective MASK, Just make some new cutting to let the mask have '' 3D '' outlook, Adjustable & Elastic Belt Strap Weight:235 gMaterial: nylon 600D, steelColor: Multicamo
Includes Bucking 70 Degrees Of Hardness For Marui Style AEG Barrels
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
Arcturus LWT MK-I CQB 10" The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass. The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device,...
Kids backpackDimension: 30 x 12 x 35 cm Made of 100% cotton
FOSCO Badge 101st airborne US- Metal construction- Official insignia
Magazine pouch can hold AK47/AKM magazines or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
PATCH HMA-369- Patch with text/picture
It has 8 functions. Thanks to its special coating, it is resistant to atmospheric conditions (Military Specification MIL-V-173C). Battery protection supports: Li-Po 7.4V / 11.1V / 14.8V. You can also disable the protection and use other batteries.
Reinforced piston. High intensity polymer material. Elongated model POLYGONAL with 19 steel teeth. For SR25/R85/L85 series. Lightweight design and very robust. Compatible AEG electric guns. (Not compatible with A&K gearbox).
Multi-Mission Pouch can hold 5.56/.223 style magazines (M4 / AR-15 / M16 / ACR / FAMAS / SCAR-L / TAVOR / SA80 / Galil / Type 89 / F2000 / AUG), 7.62/.308 (HK417/G3/SR25/M14/AK47/FAL/SCAR-H/SSR), single or double stack pistol magazines, shotgun shells or many other accessories (flashlights, knives, multi-tools, flares, radios, grenades, glow sticks)....
Nuprol PRO Goggles (Large) Lighweight and comfortable, airsoft net goggles by WE Airsoft Europe. The visor has been made using a steel net, which is even two times thinner than other competitive goggles from other brands, at the same time retains its high degree of protection (meets CE norms) as well as good line of sight. Frames were made from a durable...
Badge General 4 stars, airsoft
PLO scarf with print Made of 100% cotton
Weight: 500 g Material: polymer Color: tan Attention! Accessories shown in the last pictures are not part of the kit. NOTE! Max. head circumference: 60cm
M4 Bolt Catch Release, works on all M4 and M16 guns. Replaces your bolt catch.
