The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of Gearbox v2 with quick spring change system mounted on 7mm steel ball bearings.
Diameter 5.95mm +/- 0.01mm. Highest Quality which affects effective accuracy, good shot grouping, long range and minimal jamming. Suitable for 6.01mm precision barrels. 6MM AIRSOFT BB [KILO9] |
0,20G BIODEGRADABLE PRECISION AIRSOFT BB - 5000RD
€13.95 |
|
Every replica requires regular maintenance. Silicon oil Smart Oil™ is ideal for that kind of activities. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
|
Smart Oil™ Silicon Oil – 100 ml
€5.95 |
|
Design to install on Rear Retractable Stock, Sling is elastic for Close Quarter Battle use, Snap Hook Rifle Sling with snap on clip, Suitable for all rifle with Sling Swivel or hook, Both left & right handed compatible |
Elastic Bungee Snap Hook CQB Rifle Sling OD
€7.95 |
The Double Bell airsoft replica has good performance straight out of the box, good fit of elements and a high quality of materials used. The replica is mostly made of metal, the butt stock and pistol grip are made of polymer. Small elements such as the muzzle device, forward assist, mounting screws and magazine are made of steel.
A functional bolt-catch makes it easy to adjust the hop-up system. The Double Bell airsoft carbine has a quick spring change system, thanks to which we do not have to unscrew the gearbox skeleton to adjust the muzzle velocity to the current requirements of the game.
A steel hi-cap magazine with a capacity of 300 BBs is included with the replica.
Features of the replica:
- modular handguard with three RIS rails/ Picatinny rails
- adjustable stock
- functional bolt catch
- a set of flip-up folding sights
- slots for attaching the QD sling
- steel silencer mounted on a 14mm left-hand thread
- metal hop-up chamber
- 6.03mm inner barrel
- durable V2 gearbox based on 7mm bearings
- quick spring change system
The set does not include battery and charger.
The set includes:
- replica
- magazine
- user manual
Weight: 3060 g
Bearings type: steel ball-bearing
Gearbox version: v.2
Bearings diameter: 7 mm
Muzzle velocity: ~328fps
Accumulator connector type: small Tamiya
Accumulator included in set: NO
Magazine capacity: 300 BBs
Material: aluminum, polymer, steel
Color: black
Length: 700/780 mm
Muzzle energy: 1J
Length of internal barrel: 285 mm
Fire mode: auto, single
Every replica pass initial check up. It's being checked and overshooted on XCORTECH X3200 chronograph.
UTR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox Firearms. The ambidextrous fire selector makes the...
CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers. Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail...
CM.033 is a replica of submachine gun made famous in the days of Prohibition era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. Butt stock, rear grip, and fore grip is stylized on wood made of plastic. Magazine, frame group, bolt, barrel and receiver are made of metal.
CM040D replica The replica is made of steel and high-quality ABS. Made of steel are silencer , dummy pipe gas, body with gunbody cover, fire selector and other minor components of metal instead of steel applications, provides much greater resistance to a large variety of damage. The magazine is made of ABS (hicap) and pistol and front grip. The hop up...
V2 gearbox frame with quick spring change system, processor unit with built - in MOSFET system. Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of...
1/1 Scale High Power Assembled Electric Powered Airsoft AEG. The replica is made of metal and ABS plastic and is made by the JG company. The inner barrel, the iron aiming sights, the magazine and the trigger are made of metal while as the body, the stock and the pistol grip are made of durable ABS plastic. This combination which is also commonly practiced...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
The CM company"s CM042A is another modified version of the legendary AK carbine The replica was made of metal elements and ABS. The profiled pistol grip, the tactical grip, the stock and the front grip with the magazine are made of plastic. The barrel, the body, the iron aiming sights, the trigger and the trigger guard are made of metal.
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
G&G CM16 Raider M4 RIS airsoft rifle (Black) - Fantastic starter rifle for the absolute beginner, - Even if your not so tiny, this is still a full sized M4
Very well made of G36C by CM. It is replica of compact assault rifle that is commonly known in the world. Original firearm is used by special forces like: SAS, GROM, Bundeswehr, GOE, Spanish Air Force and many more. It also popular in the airsoft sport environment because of relation between price and realization. The set does not include a battery or a...
The A2 version of the Steyr AUG rifle is the civilian version of the AUG series licensed by Steyr Mannlicher, Austria. On the A2 you get an accessory rail where you can mount your preferred aiming device. Like on the A1 version the front grip is collapsible and the internals are metal constructed. Free battery and free charger
0447A one of the most popular replicas in the world of ASG manufactured by the Chinese company [WORKS J.G.]. Due to extensive experience in the production of ASG replicas, the company [WORKS J.G.] gives us a very well-made carbine. The replica is made of aluminum alloy and ABS. The replica's body was made of high-quality plastic. [WORKS J.G.] tried to...
SC-01 - black [BOYI] from Boyi is very well made replica. Material used to build this rifle is aluminum worked by CNC technology (Upper Receiver) and resistant nylon fiber (Lower Receiver, stock, pistol grip) which is used to real gun production. On attention deserve precision flip-up folding sights with full regulation. Replica is equipped with three...
Discover the Power of the WE23-S Minigun - a revolutionary five-barrel Gatling-style replica. It delivers dynamic action and provides team support. Compact design, durable construction, versatile features, and an astonishing firing rate of up to 36 rounds per second - it's a new level of ASG gameplay. Get ready for an exceptional experience! Please...
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of Gearbox v2 with quick spring change system mounted on 7mm steel ball bearings.
![M4 AEG WITH KEYMOD CM.515 Tan [CYMA]](https://airsoftguns.ie/17296-home_default/m4-aeg-with-keymod-cm515-tan-cyma-.jpg)
![M4 CM.507 [CYMA]](https://airsoftguns.ie/11692-home_default/m4-cm507-cyma-.jpg)
