The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 9kg
Price
Price
€1.00 - €630.00
Subcategories
There are 403 products.
Active filters
Combat knife 10inch made of 100% metal With a nylon handle Nylon cover included
Instalation Kit for ASTER V2™ Kit contents: M2 mounting set M2.5 mounting set Connectors set Selector plate stickers Gearbox sticker Please note that material and colour of insulation washers included in the kit may differ between different batches.
A complete safety selector lever, dedicated to the Cyma M4 / M16 replica. The selector fits all Cyma M4 replicas, no matter what the body material is. However, attention should be paid to the diameters of the opening on the right side of the body. The diameter of the blanking piece supplied with the kit is 8.35 / 10.42 mm. It is a complete kit. CAUTION!...
The T100 by [S&T]) is an airsoft replica of the Japanese Type 100/40 submachine gun from World War II, inspired by the German [MP18]. There were two versions of this weapon: the earlier Type 100/40, equipped with a bipod and bayonet lug but lacking a muzzle brake, and the later Type 100/44, which was simplified, more reliable, and had a higher rate of...
ARROW DYNAMIC AD Classic 6mm Bushing-- Full Metal Construction-- Design with 3 oil grooves to effectively increase the lubrication and wear resistance
Inlet Valve An inlet valve made from stainless steel, designed for most gas magazines and 40mm grenades.
The TYP 38 replica is a great choice for those looking for a realistic, historical airsoft rifle. Its solid construction, upgrade potential, and attention to detail make it not only a fun gun to use but also a valuable collector's item. The TYP 38 replica is a faithful reproduction of the historic Japanese Army rifle, produced by S&T Armament (Smart...
Guarder SP85 spring (M85), Airsoft AEG, Upgrade your AEG's fps to 270 to 290fps. It is highly recommended to upgrade plastic bushings and spring guide to metal bushings and spring guide with this product.
Combat knife 10inch made of 100% metal With a nylon handle Nylon cover included
Anti-heat selector plate, G3 series Made from a heat resisting compound. All electrical contact surfaces have a high-quality plating to ensure low inner resistance in ohm (Ω).
Weight: 170 g Material: metal
It has 8 functions. Thanks to its special coating, it is resistant to atmospheric conditions (Military Specification MIL-V-173C). Battery protection supports: Li-Po 7.4V / 11.1V / 14.8V. You can also disable the protection and use other batteries.
Steel: 5CR15 Stainless SteelOverall length: 164 mmBlade length: 83 mmBlade thickness: 3.1 mmBlade style: Clip PointHardness: 57-59 CRHandle: 5CR15 Stainless SteelWeight: 39 gKA-BAR is proud to announce the release of the Becker BK23BP Skeleton Knife.The BK23BP has a 83 mm long 5Cr15 stainless steel blade, measures 164 mm overall and comes with a hard...
JG067MG submachine gun replica The replica"s components are made from plastics and metal. The stock rail, front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Adjustable length of the stock allows the user to adapt the replica to his or hers physique and...
Complet spring set for gearbox P90. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be cancelled. Weight: 5 g Material: steel
Piston is designed to help increase rate of fire because it's light and durable. Full teeth are made with high precision providing faultless work of gearbox mechanism. Weight: 15 g Material: steel, nylon Length: 68 mm Diameter: 19 mm
Aluminium CNC Piston Head A high quality, metal, reinforced piston head - used mainly in upgrades.
M4 Bolt Catch Release, works on all M4 and M16 guns. Replaces your bolt catch.
Introducing a sturdy recreation of the Submachine Gun MK7 by S&T, a formidable counterpart to the renowned Sten, further establishing its status as an iconic weapon in the British armed forces. Crafted from stamped steel, this firearm is a specialized model within the Sterling SMG family. The Sterling Mk.7 is essentially a modified version of the...
The Beretta M92 FS is an electric replica equipped with a fixed hop-up and electric blow back system. Lightweight construction made of durable polymer includes a custom gearbox powered by four AAA batteries. 16 BBs magazine included.
