The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 0.7kg
Price
Price
€1.00 - €60.00
Subcategories
There are 42 products.
AEG Motor Brush - Designed to replace the original AEG Motor Brush Set
Airsoft holographic 551, red dot made by aluminum alloy metal. Truly pistol size red and green dot sight. 10 levels brightness adjustment for red and green dot.
Spare hydration bladder Capacity: 3 L
SHS original spare motor do not increase the muzzle velocity or ROF, but it Can increase the durability of your gun. Suitable for M4/M16 series Airsoft Electric Gun AEG Rifle. Note: Self-assembly is required, consult expertise if needed.
Made of: steel Weight: 100g Diameter: 6,03mm Length: 450mm Manufacturer: PPS Airsoft/SHS
100: 200 High Torque reinforced gear set The set of reinforced gears that were made of steel. Gears are adapted to power tuning. The whole set is compatible with V2 and V3 gearboxes. You can safely use a battery with increased current efficiency (models 10.8V and higher) with gearboxes equipped with this set of gears. Recommended springs: M150-M180.
Airsoft AEG SHS Gearbox ver.7 Spring set - Steel Construction - Anti-Reversal Latch Spring- Power Box Spring- Cut Off Lever Spring- Tappet Spring
Name LiPo 7,4V 2200mAh 20/40C Cell Type LiPo Battery Capacity [mAh] 2200 Battery Voltage [V] 7,4 Plug Type DEAN Battery size [mm] 15x35x103 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
SHS Airsoft Electric Gun Upgrade Parts Series, 100:300 Gear Set, Low Noise Torque Type. Can be used at version 2 and version 3 gearbox.
Cell Type LiPo Battery Capacity [mAh] 2000 Battery Voltage [V] 7,4 Plug Type DEAN Battery size [mm] 10x21x126 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Name LiPo 7,4V 2000mAh 15/30C Cell Type LiPo Battery Capacity [mAh] 2000 Battery Voltage [V] 7,4 Plug Type Tamiya small Battery size [mm] 10x21x126 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Inlet Valve An inlet valve made from stainless steel, designed for most gas magazines and 40mm grenades.
SHS 2nd Sear. Steel construction. Essential part for upgrading your Airsoft Sniper. This reinforced 2nd sear design for supporting high power upgrades.
Name LiPo 7,4V 950mAh 20/50C Cell Type LiPo Battery Capacity [mAh] 950 Battery Voltage [V] 7,4 Plug Type DEANS Battery size [mm] 13x25x70 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Multiprocessor Charger with a Balancer Material: Metal + Polymer Weight: 530g Measurements: 135x145x35mm Manufacturer: Electro River™ NOTICE! Charges are covered only by starting warranty.
Design for Bolt Action Airsoft Sniper Rifle VSR-10 & G-Spec, Steel Construction, Reinforced trigger sear is required part upgrade in order to handle a more powerful spring, Best performance and durability by overwhelming strength
Made of: brass Weight: 55g Diameter: 6,03mm Length: 247mm Manufacturer: PPS Airsoft, SHS
SHS Aluminum Air Seal Nozzle (long Type) -- 7075 Aluminum Construction -- For AK Series Airsoft AEG Rifle -- Purple Color
Name LiPo 7,4V 950mAh 20/50C Cell Type LiPo Battery Capacity [mAh] 950 Battery Voltage [V] 7,4 Plug Type Tamiya Battery size [mm] 13x25x70 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
SHS Airsoft AEG Upgrade Part Series -- Gearbox Spring for Version 3
