The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
AEG Rifles are available from us in Limerick & throughout Ireland. We supply & sell Cheap Airsoft Guns throughout Ireland. We can deliver your purchased products to any location in Ireland and world. All of our AEG Rifles are very realistic firearms replicas. We stock an extensive range of top quality Cheap Airsoft Guns to suit your required taste.
There are 68 products.
Active filters
1/1 Scale High Power Assembled Electric Powered Airsoft AEG. The replica is made of metal and ABS plastic and is made by the JG company. The inner barrel, the iron aiming sights, the magazine and the trigger are made of metal while as the body, the stock and the pistol grip are made of durable ABS plastic. This combination which is also commonly practiced...
The SC-02 rifle airsoft gun is made of ABS and metal elements. The RIS rails, sights, magazine, barrel and some of the elements of the body are made of metal – of CNC machined aluminum to be precise. The body and the folding stock of the airsoft gun are made of ABS. The material is a durable nylon fiber, which is exactly the same, as the one used for the...
SC-01 - black [BOYI] from Boyi is very well made replica. Material used to build this rifle is aluminum worked by CNC technology (Upper Receiver) and resistant nylon fiber (Lower Receiver, stock, pistol grip) which is used to real gun production. On attention deserve precision flip-up folding sights with full regulation. Replica is equipped with three...
The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
In 1930, there was an advanced type Mosin Nagant was developed and named M1891/30 Rifle. The Mosin Nagant was the most popular rifle in the world and used by Soviet Army during WWII but stopped production in 1948 since the design was getting old. However it has been used in some countries like Turkey, former East Germany and even showed up in Korean War...
Replica of the new series of AK assault rifles, these rifles are produced in many specifications that include civil or military. Receiver, receiver cover, external barrel, safety lever, rear sight base, trigger, gas port block, gas cylinder, bolt carrier, front sight base and muzzle brake are made of steel and aluminium, that made the replica is more...
A series of American assault rifle replicas manufactured by CYMA. The replica is characteristic for its beneficial quality to price ratio known from previous products from the company. Replicas were made fully compatible with the Tokio Marui standard and equipped with metal Hop-Up chambers. Particular elements of the replica were made in a way...
It's a replica of the newest series of Arcturus LITE, in which the upper and lower receivers were made of durable nylon. Thanks to the nylon body, the weight and the price of the replica were reduced. Using the nylon, the replica did not lose its strength, because the socket of the receiver extension tube and a barrel socket with a thread for the...
The new UTR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys, so the replica weighs only about 2 kg. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox...
The CYMA AK74M is the latest addition to the Cyma's AK line up of AEG. The receivers are solid metal and the stock/pistol grip/hand guards are made of a durable ABS plastic. In addition to the fantastic construction of the body CYMA has added the full size side folding stock for easy storage and maneuverability. The internals are the same as the other...
CM.051 is a replica of a submachine gun made famous in the days of Prohibition-era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. The buttstock, pistol grip, and foregrip are stylized on wood made of plastic. Magazine, receiver, frame group, bolt, bolt handle, safety, trigger, magazine...
A replica of the legendary American sub-machinegun, the so called grease gun which is made by the Snow Wolf company. It is a great opportunity for those who love military items from the period of the II World War. The replica’s body was made of steel when as the barrel and other minor elements are made of an alloy of zinc and aluminum. The Grease Gun is...
The new UTR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys, so the replica weighs only about 2 kg. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox...
The CM company"s CM042A is another modified version of the legendary AK carbine The replica was made of metal elements and ABS. The profiled pistol grip, the tactical grip, the stock and the front grip with the magazine are made of plastic. The barrel, the body, the iron aiming sights, the trigger and the trigger guard are made of metal.
The legendary E&L brand, whose excellent replicas of Russian assault rifles (to name just them!) have won the hearts of airsoft players from around the world, returns with the E&L Essential series. Replicas from this series are less expensive than those of the previous generation while maintaining their quality. Thanks to this, E&L products...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
The legendary E&L brand, whose excellent replicas of Russian assault rifles (to name just them!) have won the hearts of airsoft players from around the world, returns with the E&L Essential series. Replicas from this series are less expensive than those of the previous generation while maintaining their quality. Thanks to this, E&L products...
A replica of the US infantry primary rifle from World War II until the late 1950s, when the M14 and later the M16 rifle were introduced. Electric mechanism with a v7 gearbox compatible with Marui/CYMA parts, steel gears mounted on 6mm bearings and a quick spring change system. The buttstock is made of quality wood, and the elements such as barrel, gas...
FAMAS F1 Assault Rifle Replica A replica made mainly from elastic and durable nylon polymer. Elements such as the barrel, bipod, trigger, screws, pins and internal elements were made from metal. The set includes a metal Hi-Cap magazine with a capacity of up to 300 BBs, which allows for longer firing.
![AK-74 CM.040 [CYMA] Full...](https://airsoftguns.ie/17625-home_default/ak-74-cm040-cyma-full-metal-steel-and-aluminium.jpg)
![M4 CM.603 - BLACK [CYMA]...](https://airsoftguns.ie/15624-home_default/m4-cm603-black-cyma-airsoft-rifle.jpg)
![M1 GARAND RIFLE REPLICA [PJ]](https://airsoftguns.ie/18239-home_default/m1-garand-rifle-replica-pj-.jpg)
