The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
A replica of the legendary American sub-machinegun, the so called grease gun which is made by the Snow Wolf company. It is a great opportunity for those who love military items from the period of the II World War. The replica’s body was made of steel when as the barrel and other minor elements are made of an alloy of zinc and aluminum. The Grease Gun is equipped with realistic markings, the imitations of welding and other type of imperfections which are related with the production process of the original firearm – of course, in the case of the replica this is made on purpose and positively influences the replication of the original firearm.
ATTENTION! The set does not include battery and charger.
|
Professional 0,20g BBs - 1kg (5000rds) pellets
€12.95 |
|
Every replica requires regular maintenance. Silicon oil Smart Oil™ is ideal for that kind of activities. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
|
Smart Oil™ Silicon Oil – 100 ml
€5.95 |
|
Design to install on Rear Retractable Stock, Sling is elastic for Close Quarter Battle use, Snap Hook Rifle Sling with snap on clip, Suitable for all rifle with Sling Swivel or hook, Both left & right handed compatible |
Elastic Bungee Snap Hook CQB Rifle Sling OD
€7.95 |
Description
Grease Gun sub-machinegun replica
A replica of the legendary American sub-machinegun, the so called grease gun which is made by the Snow Wolf company. It is a great opportunity for those who love military items from the period of the II World War. The replica’s body was made of steel when as the barrel and other minor elements are made of an alloy of zinc and aluminium. The Grease Gun is equipped with realistic markings, the imitations of welding and other type of imperfections which are related with the production process of the original firearm – of course, in the case of the replica this is made on purpose and positively influences the replication of the original firearm.
The replica, just like the original firearm, allows to shoot only full automatic fire, yet with a little training and a properly chosen battery is it possible to provide single fire. The replica is fed by a hi-cap type magazine which holds 520 BB pellets. The replica is equipped with a special gearbox.
It is certain that the replica is a nice catch for all fans of historical weapons and for the history reenacting groups.
Automatic electric guns; Submachine guns
Gearbox version; Special Gearbox
Hop-Up Yes; adjustable
Inner barrel length; [mm] 185
Lenght; [mm] 580 - 750
Made of; ZnAl + steel
Magazine capacity; [pcs] 520
Magazine type; Hi-Cap magazine
Manufacturer; Snow Wolf
Propulsion / Powered; by Electric
Type of fire; Auto
Velocity; [FPS] ~328
Warranty; 1month
Weight; [g] 2670
Blow Back; No
ATTENTION! The set does not include battery and charger.
DESCRIPTION Thoroughly and carefully made replica of P90. The body is made from the polymer. The replica has three metal Picatinny rail allowing mounting of tactical accessories (optics, flashlights, laser sights). The mechanism is a dedicated metal gearbox v.6 with steel-sliding bearings 6mm, cylinder type 1, reinforced piston with aluminum sleeve,...
Set includes: * M89A * accumulator stick 8,4V 1150mAh * charger * magazine Hi cap 450rd
CM.041J is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper,...
JG069MG submachine gun replica The replica's components are made from plastics and metal. The stock rail, front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Adjustable length of the stock allows the user to adapt the replica to his or hers physique and...
DESCRIPTION A Rifle of the well-known Belgian PDW FN Herstal P90 submachine gun produced in Fabrique Nationale in the Belgian city of Liege which is famous for the production of weapons and great chocolates. Compact construction Due to the compact design, this gun is used by security guards, drivers, and vehicle crews, as well as by special forces and...
JG070 is replica of most popular SMG's on world - MP5. Original firearm is commonly used by special forces like: SAS, GROM, Navy SEALs, GSG9 and many more.
The replica's components are made from plastics and metal. Front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Small size of the replica makes it perfect for operations in urban areas and in small, confined spaces. The battery is located inside the fixed...
CM.041 is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper,...
AGM MP007C is an airsoft replica of the iconic German submachine gun, the MP40, from the World War II era. Produced by AGM, this replica is meticulously crafted, staying true to the original, including the foldable metal stock. All the metal components of the original firearm have been precisely reproduced in this replica. PLEASE NOTE!!! Battery and...
JG067MG submachine gun replica The replica"s components are made from plastics and metal. The stock rail, front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Adjustable length of the stock allows the user to adapt the replica to his or hers physique and...
Weight: 40 g Material: aluminum, steel Color: black
Classic English sub machine gun immortalized by its action during the Second World War, where the British commando forces and resistance forces in occupied Europe, benefitted from its simple but efficient construction.
CM.041 SD6 is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal...
The JG-0451 airsoft AEG gun is modelled on the famous Czechoslovakian made V61 Skorpion SMG or sub machine gun. The very solidly made replica has a mechanism specially constructed for this model inside that allows receiving 260 fps. The replica's parameters make it an ideal submachine gun for conducting safe games in CQB. Elements such as the stock,...
CM.041B is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper,...
CM.033 is a replica of submachine gun made famous in the days of Prohibition era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. Butt stock, rear grip, and fore grip is stylized on wood made of plastic. Magazine, frame group, bolt, barrel and receiver are made of metal.
A replica of the legendary American sub-machinegun, the so called grease gun which is made by the Snow Wolf company. It is a great opportunity for those who love military items from the period of the II World War. The replica’s body was made of steel when as the barrel and other minor elements are made of an alloy of zinc and aluminum. The Grease Gun is equipped with realistic markings, the imitations of welding and other type of imperfections which are related with the production process of the original firearm – of course, in the case of the replica this is made on purpose and positively influences the replication of the original firearm.
ATTENTION! The set does not include battery and charger.
![P90 CM.060B SMG [CYMA]](https://airsoftguns.ie/14876-home_default/p90-cm060b-smg-cyma-.jpg)
