The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
There are 20 products.
Active filters
Enhanced safety lever allowing rifle safety engagement and disengagement with your index finger for right-handed operator and thumb finger for left-handed operator Weight: 30 g Material: steel Color: black
Airsoft AEG Upgrade Part Series, Gearbox Spring for Version 2. Reversal Stop Latch Spring, Tappet Spring, Cover Spring, Cutoff Lever Spring, Switch Spring
A complete safety selector lever, dedicated to the Cyma M4 / M16 replica. The selector fits all Cyma M4 replicas, no matter what the body material is. However, attention should be paid to the diameters of the opening on the right side of the body. The diameter of the blanking piece supplied with the kit is 8.35 / 10.42 mm. It is a complete kit. CAUTION!...
G36 Replica Pin Steel assembly pin for G36 replicas.
The pin is designed for the body of the G36 type replicas.
WELL Trigger Assembly Suitable for airsoft Type 96 series by WELL MB-01 / SD96 / UTG Type 96 Shadow Ops / Bravo / Double Eagle / Maruzen and other compatible airsoft bolt action sniper rifles. Steel made upgrade part.
Weight: 170 g Material: metal
Cocking handle's spring for the M series
Magazine Valve Key - Model:PA 0401- Gross Weight:90g- Constructed with Steel Material- Suitable For Marui/ WA/ KSC/ Maruzen Gas Charging Valve- Use for disassemble magazine value of gas blowback pistol/rifle Magazine valve key made of metal. Design in such way that this one key will fit the divergent valve standard's.
A set of mounting pins for the MP5 replica's body. Manufacturer: CYMA Weight: 2g Material: aluminum Number of pieces in the set: 2 Length mm: 29 Diameter mm: 6/8.4 Gun model: MP5
Airsoft Barrel Nut Wrench - Model: EX 331 - Weight: 95g - Gross Weight:110g - Made by Element - For DD Lite/RIS II M4A1/MK18/Omega X Series/PWS Diablo Rail/MK110/MK112/MK114/MK116
M-147 Bottom Receiver for M4/M16 Replicas A lightweight, made entirely of polymer bottom receiver for AR15 family of replicas. The set includes a fire mode selector. Purpose: M4 / M16 replicas Material: Polymer Weight: 105 g Color: Black Manufacturer: Golden Eagle
PDI Repair kit for VSR-10 PDI Chamber The repair kit includes spare o-rings, screws and other small pieces that can be damaged or lost from the new PDI hop-up unit (for VSR-10 / G-Spec). The entirely new hop-up unit includes entirely new parts and so requires entirely new types of replacement components so here they are.
The catch is ambidextrous so can be installed for either left or right handed shooters, is made of sterner materials than some stock mag catches and has a strong but purposeful feedback to the action. Making sure you have replacement parts on hand can avoid tactical blunders in the field so don't hesitate to get supply of replacement parts, especially...
ENERGY Enhanced Loading Muzzle- For Tokyo Marui M1911 GBB Airsoft Pistol
SHS Airsoft AEG Upgrade Part Series -- Gearbox Spring for Version 3
SHS 2nd Sear. Steel construction. Essential part for upgrading your Airsoft Sniper. This reinforced 2nd sear design for supporting high power upgrades.
Design for Bolt Action Airsoft Sniper Rifle VSR-10 & G-Spec, Steel Construction, Reinforced trigger sear is required part upgrade in order to handle a more powerful spring, Best performance and durability by overwhelming strength
Suitable for M4/M16 Series Airsoft Electric Gun AEG RifleSteel Bolt Catch Release Steel Construction Design for Replace The Original Bolt Catch Release
![MP5 PIN SET [CYMA]](https://airsoftguns.ie/18832-home_default/mp5-pin-set-cyma-.jpg)
![AEG AR-15/M4 AMBIDEXTROUS MAGAZINE RELEASE - BLACK [CYMA]](https://airsoftguns.ie/18077-home_default/aeg-ar-15m4-ambidextrous-magazine-release-black-cyma-.jpg)
