The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Combat knife 10inch made of 100% metal With a nylon handle Nylon cover included
Cyma metal magazine mid-cap 60bb, for M14 series (CM 032, 032A)
Battery NiMH 1600mAh 8,4V - mini SF type [8FIELDS] Accumulator type: NiMH Accumulator voltage: 8.4 V Accumulator capacitance: 1600 mAh Accumulator cells type: mini Accumulator connector type: small Tamiya NOTICE! Batteries are covered only by starting warranty.
HFC magazine for: *HG-192 *HG-194 *HG-199 Presented magazine can be powered only by green gas. Weight: 280 g Magazine capacity: 23 BBs Material: aluminum Color: black
Spare hydration bladder Capacity: 3 L
A compact and simple radio by the acclaimed Baofeng. Baofeng BF-T1 radio is a so-called dual band, which means a radio that operates in two bands - VHF and UHF. Baofeng BF-T1 can easily fit inside the User’s hand and ergonomically placed keys allow for operation with just one hand. Range of Compatible Frequencies: 400 - 470 MHz (RX/TX) and 87 - 108 MHz...
A set of CNC full metal airsoft grenades with original markings with a capacity of 70 BBs. Powered by a Green Gas. Compatible with most 40mm airsoft grenade launchers. Weight: 600 g Material: aluminum, steel Length mm: 86 Diameter mm: 40 Granade bullet capacity: 70
Rail Covers 8pcs/Pack Dark Earth- Weight:110g- Include 8pcs- Length:155mm,109.5mm,86.5mm,64.5mm- Color:Dark Earth- Mark version
CM.041 SD6 is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal...
High speed revolution Motor 40000 rpm high quality engine, which helps to increase the rate of response. Intended to increase the rate of fire, not to cooperate with the stronger spring than 100 m /s.
The replica was made of high-quality metal and polymer. Metal parts include the slide of the replica while the frame was made of polymer. The top of the slide features comfortable iron sights with a fiber-optic front sight. The replica is powered by a 12 g CO2 capsule, installed directly in a magazine. The magazine itself is a two-row kind, which allows...
Precisely made 0,25g pellets that glow in the dark. After illumination there is possibility to track the pellet even in complete darkness. This ammunition was made by the well-known Taiwanese company BLS. These BB are very well made, we recommend them to each player.
It has 8 functions. Thanks to its special coating, it is resistant to atmospheric conditions (Military Specification MIL-V-173C). Battery protection supports: Li-Po 7.4V / 11.1V / 14.8V. You can also disable the protection and use other batteries.
Jump Plate Carrier is a lightweight vest designed to provide comfort and maximum mobility. Vest offers many configuration options depending on the needs of the operator. Pouches can be mounted inside and outside (PALS webbing) of the cummerbund. Included soft dummy ballistic inserts. Weight: 1150 g Material: 1000D polyester Length: 300 mm Camouflage:...
Aluminum end plate compatible with AEG AR15/M4 and SR25 replicas in the TM system. Features sling attachment points on both sides. Included 1 steel QD sling swivel. Weight: 40 g Material: aluminum, steel Color: black
Metal Hop-Up chamber for AK series Made of: Metal Manufacturer: CYMA
