
Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
LiPo 11.1V 1200mAh 2S/20C Battery - Under AK Dust Cover
Electro River™ is a new quality on the LiPo battery pack market. The manufacturer has set for himself a goal to create a product whose quality will match even the best players on the market of batteries whilst at the same time retaining an attractive price. The offer includes high capacity packs designed with limited space replicas in mind - new packs are similar to a lighter in size!
LiPo 11.1V 1200mAh 2S/20C Battery - Under AK Dust Cover
Electro River™ is a new quality on the LiPo battery pack market. The manufacturer has set for himself a goal to create a product
whose quality will match even the best
players on the market of batteries whilst at the same time retaining an attractive price. The offer includes high capacity packs
designed with limited space replicas in mind - new packs are similar to a lighter in size!
High quality wiring and connectors guarantee maximum exploitation of the energy potential of the battery by minimizing losses
during energy transfer. Such a solution also prevents overheating of the contacts Every cell has a Nanosafe® safeguard in order to
minimize the risk of potential fire of the pack as a result of damage.
Due to Subzero Power® technology, the low temperature efficiency has been increased. Even in temperatures below zero
the level of self-discharge is very low.
High quality craftsmanship of each cell and other elements provides minimal internal resistance and voltage durability under stress.
The abovementioned features have allowed to achieve up to 20% more charging cycles than in other Li-Po batteries! This makes
Electro River™ products a very attractive offer both for beginners and advance LiPo battery users.
Lithium-Ion-Polymer (LiPo) packs are successors to the known Lithium-Ion (LiIon) packs. The basic advantage of LiPo is
undoubtedly the ratio of capacity to size.
The packs are of very small size whilst maintaining a very large electric efficiency, which allows for choosing an appropriate pack for
practically every AEG replica.
Do not feature memory effect. Can be charged very frequently, without the need to be fully discharged. Frequent charging is
beneficial for every type of a battery.
It is crucial to remember not to discharge a LiPo pack to a level of less than 3V per cell and not to overcharge over 4,2V per cell.
Another advantage of LiPo packs is a small percentage rate of self-discharge. Unused pack will lose approximately 3-5% of energy
per month. It is important to pay attention to an unused pack as there is a
risk that as a result of not being used over a prolonged period of time it can be discharged beneath the acceptable minimal value
(3V per cell) and inadvertent chemical reactions may occur, which lead to a deterioration of the pack’s properties including a
permanent damage and, in extreme cases, fire. Unused LiPo pack should be charged to an average of 70%.
Properly used, a LiPo pack has an exploitation period of on average 500-700 cycles. An important factor is the temperature that
LiPo packs can work in. In contrast to other batteries, LiPo cells perform well in low temperatures. However, they should be charged
in room temperature. In order to maintain the good condition of LiPo batteries it is required to balance them during charging with a
service connector, which most LiPo packs have (a good LiPo charger features an in-built balancer).
Attention:
This battery model can be placed under the AK dust cover from many popular manufacturers, including E&L which is
difficult to adapt a battery to.
Battery Capacity [mAh]; 1200
Battery size [mm]; 15x15x185
Battery Voltage [V]; 11,1
Cell Type; LiPo
Number of Cells; 3
Plug Type; Tamiya small
6,03mm steel precision inner barrell - 400 mm The mount of the precision barrel improves the replica’s precision and range and also the repeatability of shots. The mount of the 6,03mm precision barrel in the replica requires the use of high quality BB pellets.
A gas powered pistol replica by East & Crane. The replica was made of metal and high-quality plastic. A comfortable pistol grip, the replica's skeleton and small internal and external elements are made of plastic. The lock and the magazine holding 24 BBs are made of metal.
Jump Plate Carrier is a lightweight vest designed to provide comfort and maximum mobility. Vest offers many configuration options depending on the needs of the operator. Pouches can be mounted inside and outside (PALS webbing) of the cummerbund. Weight: 1750 g Length: 260 mm Height: 340 mm Camouflage: MB Material: 600D polyester
The universal holster is mounted on the MOLLE system is additionally equipped with a spare magazine pouch.
Weight: 100 g Color: black Length: 165 mm Material: metal Magazine model: low-cap Magazine capacity: 30 BBs Manufacturer: CYMA
Steel Cut Off Lever for Ver.II Gearbox
This is one of the best CO2 Revolver 8 inch we have ever had the pleasure of shooting!! The revolvers have double action trigger systems and adjustable rear sight for extra realism. Even the shells have received a stamp of approval – "DAN WESSON".
Weight: 1000 g Material: 1000D polyester Color: black Package quantity: 1 pcs. Length: 820 mm Width: 280 mm
JG067MG submachine gun replica The replica"s components are made from plastics and metal. The stock rail, front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Adjustable length of the stock allows the user to adapt the replica to his or hers physique and...
Set includes * replica * charger * magazine low cap 50rd
The silencer have 14mm counterclockwise thread.
Weight: 160 g Accumulator type: metal Accumulator connector type: T-CONNECTOR (DEANS) Accumulator cells type: lithium Accumulator capacitance: 2300 mAh Length: 103 mm Width: 34 mm NOTICE! Batteries are covered only by starting warranty.
1.5X ZF-41 Scope with mount for Kar98 replicas Optical scope dedicated to the historical replica of the Kar98 rifle. The scope is made entirely of metal, with the exception of the covers for the adjustment knobs and the tightened viewfinder. The telescope has a dedicated assembly and a set of glass covers.
Shoulder holster with mag pouch. Padded mesh shoulder panels allows the body to breathe for maximum comfort. Size is fully adjustable allowing you to wear the holster concealed or overtly.
Light sticks are used to identify specific areas or zones, unit colors and personnel marking.NOTE! Electric light sticks powered by 2x AA battery (not included).
G&G CM16 Raider M4 CQB RIS - Construction with SPECIAL FORCE Marking, - Fully/Semi Automatic Shooting Airsoft Electric Gun (AEG), - Black Color Version
LiPo 11.1V 1200mAh 2S/20C Battery - Under AK Dust Cover
Electro River™ is a new quality on the LiPo battery pack market. The manufacturer has set for himself a goal to create a product whose quality will match even the best players on the market of batteries whilst at the same time retaining an attractive price. The offer includes high capacity packs designed with limited space replicas in mind - new packs are similar to a lighter in size!