The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Made of plastic a replica of German compact pistol P229.
Pistol is made of a high-quality composite that is reminiscent of the polymer used in the original. Slide is made of plastic with a smooth texture that imitates oxidized steel.
Made of plastic a replica of German compact pistol P229.
Pistol is made of a high-quality composite that is reminiscent of the polymer used in the original. Slide is made of plastic with a smooth texture that imitates oxidized steel.
The surface with a significant texturing gives a sure grip. The inner barrel and parts of the internal mechanisms were made of metal. For dynamic aiming there are a white dot painted on front sight.
After pulling the slide you can see the piston, the loading mechanism and the upper part of the magazine. Before each shot it's necessary to pull the slide to the rear position. When the magazine is empty the slide stays in the rear position.
Model: P229
Caliber: 6 mm
Magazine capacity: 15
Total length: 190 mm
Energy:0,5 J
Weight: 630 g
Color: black
Weight: 140 g Length: 363 mm Internal diameter: 6,02 mm
Quick and easy to use charger with balancer. After connection to power one of three LED s will flask. When charging is completed the one of three LED s will light constant. NOTICE! -Charges are covered only by starting warranty. - Can be yellow or blue (pictures)
Battery with charger inc. The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped with metal...
WARFET is GATE’s most advanced AEG Control System. It has 20 functions and almost 6 million possible configurations. The outstanding Tactical Programming Card provides you with very easy access to the WARFET Power Module settings. SUPER-EASY INSTALLATION - JUST PLUG&PLAY, NO SOLDERING REQUIRED
25-round Green Gas metal magazine. Dedicated for WE-TECH M9/92FS series.
Picatinny mounting rail for the KAR98K sniper rifle. It is mounted in the place of the factory rear sight, thanks to which we can use scopes and collimators mounted on ris rails. Weight: 60 g Material: aluminum Color: black
Steyr AUG A1/A2 AEG Magazine, High capacity 330 round hi-cap magazine for AUG series AEG rifles. Fits both Marui and Classic Army AUGs and many others like JG. High Quality Durable ABS plastic construction.
Set of Future knee protection pads Made mostly of nylon, highly ergonomic elbow protection pads. The protection shells were made of durable plastic and ensure a high level of protection against joint injuries. Thanks to their specific cone shape the spread of the force of the impacts guarantees increases amortization. The shells are reinforced with the...
High-quality polymer tappet plate. It is the ideal solution if the tappet plate in your replica is damaged or worn out. CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be canceled.
Set of RIS rail covers - black A set of eight rail covers: 2x 150mm, 2x 100 mm and 4x 50 mm. Their anti-slip texture allows for a much more firm, safer hold.
Scope Claw Mount for MP5/G3 and most HK Style clones. Scope mount has double Picatinny rails. Perfect for all varieties of scope, tactical flashlight, and laser. Weight: 150 g Material: aluminum Color: black Length: 133 mm
FSBE Tactical Vest - Molle The vest set includes: - module with three double ammunition pouches for M16/M4 magazines - module with medic pouch - admin pouch with a pocket for pistol magazine The vest is prepared for an assembly of dummy balistic inserts, and as a standard includes such inserts made of sponge. It has also a built-in steel lines system...
- Material - metal- Magazine Capacity: 150rds- Fits almost all M4 Series rifles
FAST PJ Helmet only Cover A helmet cover by Ultimate Tactical. Made from nylon material, reinforced with RIP-STOP weave. Features a hole for a night vision goggles mount.
Made by low carbon steel wire material. Offer well protection and cool look. Ballistic Protection: Approx. 500 FPS with 6mm 0.20g BB. Adjustable elastic strap. Suggested to use with goggle for best protection. Perfect for airsoft.
Weight: 175 g Material: ABS Color: olive Protective visor: plexiglass Color of glasses: yellow, transparent, tinted
Made of plastic a replica of German compact pistol P229.
Pistol is made of a high-quality composite that is reminiscent of the polymer used in the original. Slide is made of plastic with a smooth texture that imitates oxidized steel.
![TAPPET PLATE V3 [POINT]](https://airsoftguns.ie/17908-home_default/tappet-plate-v3-point-.jpg)
