Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 171 products.
Active filters
Instalation Kit for TITAN V3™ Kit contents: Selector plate stickers (3pcs) Trigger stickers (6pcs) Connectors set 0,15mm trigger anti-backlash stickers (3pcs) 0,30mm trigger anti-backlash stickers (3pcs) 0,50mm trigger anti-backlash stickers (3pcs) 0,3mm washers set 0,2mm washers set 0,1mm washers set Please note that material and colour of...
Instalation Kit for ASTER V2™ Kit contents: M2 mounting set M2.5 mounting set Connectors set Selector plate stickers Gearbox sticker Please note that material and colour of insulation washers included in the kit may differ between different batches.
G&P Airsoft AEG Upgrade Part Series " Polyamide Low Resistance " -- Selector Plate for Marui G3 Ver2 Gearbox -- "For Airsoft Electric Toy Gun Use Only"
WELL Trigger Assembly Suitable for airsoft Type 96 series by WELL MB-01 / SD96 / UTG Type 96 Shadow Ops / Bravo / Double Eagle / Maruzen and other compatible airsoft bolt action sniper rifles. Steel made upgrade part.
SHS M120 AEG Spring Material: Steel 110 m/s spring
Guarder SP100 spring (M100), Airsoft AEG, Upgrade your AEG's fps to 320 to 340fps.
Piston is designed to help increase rate of fire because it's light and durable. Full teeth are made with high precision providing faultless work of gearbox mechanism. Weight: 15 g Material: steel, nylon Length: 68 mm Diameter: 19 mm
Anti-heat selector plate, MP5 series Made from a heat resisting compound. All electrical contact surfaces have a high-quality plating to ensure low inner resistance in ohm (Ω).
Gear sector clips are used to prevent “empty shooting” and is primarily used with high-speed tunings (25+ rounds/sec.). 1 piece.
High-quality tappet plate for V2 gearbox. This material can withstand much more than plastic or ABS. It is flexible and resistant to impact. The installation of this component ensures reliable operation of the switch, the type of fire. CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember...
The ULTIMATE® 6mm bushings are perfectly suited for upgrading all TM-compatible gear boxes that use nylon bushings as standard.
Deep Fire Enlarged Metal Nozzle Essential part for upgrading your Airsoft AEG Tighter sealed air nozzle ensures more barrel exit muzzle velocity This Oil Lubricated Air Seal Nozzle increase the air tightness of the cylinder Direct replace the original air nozzle of Airsoft Electric Gun As always, upgrading AEG require necessary skill & technique to...
Instalation Kit for TITAN V2™ Kit contents: Selector plate stickers Female deans-t connector Motor connectors 2.8 x 0.5 mm [0.11 x 0.02 in] 0.7mm [0.03 in] screw and washers set 0.5mm [0.02 in] screw and washers set Please note that material and colour of insulation washers included in the kit may differ between different batches.
Hop-Up rubber made from silicon. It is designed for mechanism with spring from 130 m/s.
The reinforced complete V2 version gearbox was designed to be mounted in the M4 replica series. It is a perfect solution for those who want to buy a good gearbox in a reasonable price. The gearbox's frame was adapted to mount 7mm bearings and the V3 version allows to use it in the M4/M16 family carbine replicas.
SHS original spare motor do not increase the muzzle velocity or ROF, but it Can increase the durability of your gun. Suitable for M4/M16 series Airsoft Electric Gun AEG Rifle. Note: Self-assembly is required, consult expertise if needed.
Upgrade trigger for MP5 series.
Made of: steel Weight: 130g Diameter: 6,03mm Length: 450mm Manufacturer: PPS Airsoft/SHS
King Arms Tappet Plate for M14 AEG Gear Box v.7, high-quality part which provides high-performance and extra durability. Made from high-strength ABS plastic