The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 232 products.
Active filters
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
Ball-bearing silenced Bore-Up piston head A silenced Bore-Up piston head with ball-bearing. This is a high quality, made from durable polymer silenced piston head with ball-bearing. It is designed for use with Bore-up sets.
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
Made of: Aluminum Weight: 10g Manufacturer: Super Shooter/SHS
Complete set of a silent aluminum piston head, complete with a polymer piston with a steel teeth rack. Producent: CYMA Weight: 30g Material: polymer, aluminum, gum, steel CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be canceled.
Airsoft Accessory Series -- Profile Gas Block -- Suit for Marui M4 Series Outer Barrel -- Black Color Version
Weight: 40 g Material: aluminum HIGH PERFORMANCED HOP-UP FOR M4/M16
Replacement of Standard Magazine for Thompson M1A1 AEG . Full Metal Construction . Operated by winding the compression spring . Large thumb dial on bottom of magazine allow you to wind it up . Plastic 6mm Bb's only . Capacity: 400 Rounds . Weight(Gram): 225 Made of: Metal Magazine type: Hi-Cap magazine Manufacturer: Snow Wolf
This steel spring guide bearing for V2 gearboxes is a great alternative if you are is damaged or you want to tune up the replica. It will provide proper spring operations. Warning! This spring guide does not match CYMA replicas in which the V2 gearbox is installed. All Cymy replicas are equipped with a V3 spring guide, both gearbox version V3 and V2....
Steel Ball Bearing Spring Guide V3 A ball bearing spring guide made of steel. It is intended for installation in gearbox V3 replicas. Bearings enable increased reliability and extended gearbox lifetime.
Guarder SP90 spring (M90), Airsoft AEG, Upgrade your AEG's fps to 290 to 300fps. It is highly recommended to upgrade plastic bushings and spring guide to metal bushings and spring guide with this product.
7075-T6 aluminium alloy construction - CNC machining and high precision - Dual O-Ring design for better air sealing - Rubber cushion to absorb shock - For AEG Ver. 2 gear box (M4M16G3MP5SCARKAC PDWMASADASR25AR10)
Guarder SP85 spring (M85), Airsoft AEG, Upgrade your AEG's fps to 270 to 290fps. It is highly recommended to upgrade plastic bushings and spring guide to metal bushings and spring guide with this product.
M-147 Bottom Receiver for M4/M16 Replicas A lightweight, made entirely of polymer bottom receiver for AR15 family of replicas. The set includes a fire mode selector. Purpose: M4 / M16 replicas Material: Polymer Weight: 105 g Color: Black Manufacturer: Golden Eagle
Made of: brass Weight: 50g Diameter: 6,03mm Length: 229mm Manufacturer: PPS Airsoft, SHS
Magazine Valve Key - Model:PA 0401- Gross Weight:90g- Constructed with Steel Material- Suitable For Marui/ WA/ KSC/ Maruzen Gas Charging Valve- Use for disassemble magazine value of gas blowback pistol/rifle Magazine valve key made of metal. Design in such way that this one key will fit the divergent valve standard's.
Guarder SP100 spring (M100), Airsoft AEG, Upgrade your AEG's fps to 320 to 340fps.
Spring SP 110 [Guarder] with an uneven pitch AEG tuning.Both are polished face.Compatible with AEG Facilities, except PSG-1.Equivalent to 110 Systema.
