The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 1kg
Price
Price
€2.00 - €83.00
Subcategories
There are 101 products.
Active filters
Metal Constructed Killflash for ACOG scope. Easy to install with included elastic band. Protect your eyes blind from optical probe "OP" Flashlight (strong lighting). Able to protect the front lens of your ACOG scope.
Mechanism works well on not harder spring than 150 m/s. All gears are fabricated on CNC machines.
This is a precision machined SHS Steel Cut Off Lever for Version 3 metal gearbox AEGs. This Steel Cut Off Lever should fit in most Version 3 metal gearboxes without any modification. The steel construction makes this cut off lever twice as strong as normal zinc alloy cut off levers. The SHS Steel Cut Off Lever is extremely sturdy and precisely machined,...
Tango Down Stubby Vertical Grip DE - Fit all 20mm RAS / RIS Rail / SIR System - Military Tactical RIS Short Grip for CQB purpose - Offer firm hold on your weapon during firing - This foregrip allow fast & accurate aiming onto your target
Set of 2.8x0.5 Flat Connectors [Female + Male]Two sets of flat connectors intended for installation in wiring or the motor of an AEG replica. The set includes 2 pairs of heat-shrink tubings.
CNC Aluminum dummy silencer features a built-in tracer unit with a high power flash and ultra-sensitive motion sensor. Powered by 4x AAA batteries.Warning! When installing the batteries, make sure that the device is turned off and avoid touching sensitive electronic components - you will avoid short circuits and the risk of electric shock.
Suitable for M4/M16 Series Airsoft Electric Gun AEG RifleSteel Bolt Catch Release Steel Construction Design for Replace The Original Bolt Catch Release
Bi-pod for the MB06D Airsoft Gun. Foldable bi-pod with adjustable legs for different heights.
Designed for use on SMGs and carbines to provide faster target acquisition and accuracy. The best for two eyes open shooting to give the operator greater zone control. It has 10 levels of brightness adjustment of the red aiming point. Fits all standard Picatinny/Weaver rails. Powered by a single CR2032 battery (not inluded). The sight comes from the...
Full Metal Constructed Airsoft Aimpoint Micro T-1 1X24 dark earth Red & Green Dot Scope Type Illuminated Sight , Adjustable Red / Green Illuminated Dot, 5 Levels Dot Brightness Control on each illuminate color, Include See Through design
- HIGH TORQUE long motor - Manufacturer CYMA - Fits to: series MP5, G3, M4, P90, M16, M15, SR4
Product Information Gear sector chip which fits the space better between sector gear and tappet plateBasically this upgrade part can enable the tappet plate (air nozzle) to delay it's releasing time Enables reliable BB Feeding in a modified high performance AEGEven though it is such small upgrade gearbox part, it will guarantee an AEG's reliable...
Element Tango Down Stubby Vertical Grip black - Fit all 20mm RAS / RIS Rail System - Military Tactical RIS Short Grip for CQB purpose - Offer firm hold on your weapon during firing - This foregrip allow fast & accurate aiming onto your target
A replica of HWS, the best for two eyes open shooting and when you need speed and accuracy. Guarantees faster target acquisition and gives the operator greater zone control. Fits all standard Picatinny rails. Illumination types: red and green.
Weight: 100 g Material: aluminum Length: 145 mm Diameter: 30 mm The silencer have 14mm counterclockwise thread. NOTE! Can be used as an extension of the barrel to mount longer inner/precision barrel.
Element Hand Grip Motor cover for M4, AEGSpecial patch end-screw eliminates the troublesome to replace your motor Essential part for upgrading your Airsoft Electric Gun AEG Rifle
Set of RIS rail covers - black A set of eight rail covers: 2x 150mm, 2x 100 mm and 4x 50 mm. Their anti-slip texture allows for a much more firm, safer hold.
1.5X ZF-41 Scope with mount for Kar98 replicas Optical scope dedicated to the historical replica of the Kar98 rifle. The scope is made entirely of metal, with the exception of the covers for the adjustment knobs and the tightened viewfinder. The telescope has a dedicated assembly and a set of glass covers.
SHS Airsoft Electric Gun Upgrade Parts Series, 100:300 Gear Set, Low Noise Torque Type. Can be used at version 2 and version 3 gearbox.
PicoSSR 3 is a new, more powerful version of the world's smallest mosfet - PicoSSR 2. Its dimensions are merely 4x6x21 mm.
![Silencer 145X30mm [CYMA] Sound suppressor](https://airsoftguns.ie/16385-home_default/silencer-145x30mm-cyma-sound-suppressor.jpg)
