The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 1.1kg
Price
Price
€2.00 - €83.00
Subcategories
There are 126 products.
Active filters
Full Metal Constructed Airsoft Aimpoint Micro T-1 1X24 dark earth Red & Green Dot Scope Type Illuminated Sight , Adjustable Red / Green Illuminated Dot, 5 Levels Dot Brightness Control on each illuminate color, Include See Through design
Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 2100 mAh Length: 103 mm Width: 34 mm Accumulator voltage: 7,4 V Height: 16 mm NOTICE! Batteries are covered only by starting warranty.
Made of aluminum silencer adapted for mounting on barrels with 14CCW thread. Material: Aluminum Thread: 14 mm CCW Weight: 75 g Color: Coyote
The long-awaited Li-Po battery dedicated to electric pistols. Its significantly improves the response to trigger pull -replica comes alive! The battery fits without any modifications in the replica, its charging is detached using chargers for Li-Po batteries. For charging, use only chargers dedicated for li-po batteries. The battery is connected to the...
Tango Down Stubby Vertical Grip DE - Fit all 20mm RAS / RIS Rail / SIR System - Military Tactical RIS Short Grip for CQB purpose - Offer firm hold on your weapon during firing - This foregrip allow fast & accurate aiming onto your target
Easy to use NiMH battery charger.The charger uses 110-240V AC main power.Charges NiMH, NiCd batteries with up to 2A charge current.For 7,2V, 8,4V and 9,6V batteries. High quality, safe and durable.Tamiya Large plug. With led indicators. NOTICE! Charges are covered only by starting warranty.
KJW designed replicas that can be powered by green gas or CO2, it`s depend which magazine type we use. Presented magazine can be powered only by CO2. Magazine is sell without CO2 charge (photo is made for information).
Accumulator type: metal Accumulator connector type: T-connerctor Accumulator cells type: lithium Accumulator capacitance: 1500 mAh Length: 125 mm Width: 20 mm Accumulator voltage: 11,1 V NOTICE! Batteries are covered only by starting warranty.
BIPOD Fit to AGM 002 APS2 L96 FOR SNIPER RIFLEMaterial: metalcolor: blackweight: 835 g
Color: black Material: polymer Magazine model: mid-cap Magazine capacity: 155 BBs Manufacturer: GUARDER
During charging LiPo battery needs to be remembered: * Use ONLY a charger approved for lithium batteries. * Charging each time using the balancer is advisable. It is preferable to use it at least every 5 cycles of loading. * DO NOT leave battery without supervision when it is charging. * DO NOT use broken cells. * Avoid prolonged charging, it can cause...
G36 Magwell Conversion Kit. Direct replacement for Tokyo Marui/Jing Gong G36 Series AEG magwell. Take M4 Magazine to work with your G36 Series AEG (G36C, G36K, G36E, etc...).
AEG Heatshrinks set contains 21 heatshrink tubes, all 9 cm [3,5 inch] long.
The silencer have 14 mm counterclockwise thread. NOTE! Can be used as an extension of the barrel to mount longer inner/precision barrel. Weight: 120 g Material: aluminum Color: black Length: 196 mm Width: 32 mm
Presented magazine can be powered only by green gas. Weight: 165 g Color: black Material: aluminum Magazine type: Green Gas Length: 117 mm Magazine capacity: 11 BBs
Element Tango Down Stubby Vertical Grip black - Fit all 20mm RAS / RIS Rail System - Military Tactical RIS Short Grip for CQB purpose - Offer firm hold on your weapon during firing - This foregrip allow fast & accurate aiming onto your target
HFC magazine for: *HG-192 *HG-194 *HG-199 Presented magazine can be powered only by CO2 capsule. Weight: 280 g Magazine capacity: 23 BBs Material: aluminum Color: black
Suppressor with a tracer unit illuminating the pellets, 190mm in length and 35mm in diameter. Tracer type fluorescent pellets are required for the suppressor to work effectively. Suppressor features a counter-clockwise 14mm thread. Full Auto Tracer Unit from FMA. It is one of the cheapest Tracer Units on Market and need 3 x AAA Batteries Material: metal...
Suitable for M4/M16 Series Airsoft Electric Gun AEG RifleSteel Bolt Catch Release Steel Construction Design for Replace The Original Bolt Catch Release
![KP-05 CO2 MAGAZINE [KJW]](https://airsoftguns.ie/15242-home_default/kp-05-co2-magazine-kjw-.jpg)
![[BLUEBOX] 155RD MID-CAP...](https://airsoftguns.ie/12294-home_default/-bluebox-155rd-mid-cap-magazine-for-ak-series-black-guarder-.jpg)
