Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 1412 products.
Active filters
Color: white Weight: 0,25g (4000rds) Dimensions: 5,96 +/- 0,01mm Double polishing Manufacturer: Rockets™
Set include two RIS rails 98 mm long. Weight: 70 g Material: aluminum Length: 98 mm
Multiblack Utility backpack made by waterproof high density Nylon material, Huge volume of capacity, able to store 2 Rifles (Sniper/Rifle), 1" molle webbing throughout the backpack, Extendable Gun Pouch is able to store up to 46"(~120cm) long rifle gun.
Jump Plate Carrier is a lightweight vest designed to provide comfort and maximum mobility. Vest offers many configuration options depending on the needs of the operator. Pouches can be mounted inside and outside (PALS webbing) of the cummerbund. Weight: 1750 g Length: 260 mm Height: 340 mm Camouflage: MB Material: 600D polyester
Great replica in scale 1: 1 of one of the most popular shotgun, used by civilians, police or military. The replica has been produced by CYMA specialy for the airsoft market. Just like in other replica from that producer, rifle has a reliable mechanism in this case a pump action system powered by a spring. This Shotgun is present in 2 category: low-budget...
The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
Green Camo, Stretch bandage 100% polyester, Dimension: 4,5 mtr x 5 cm. 450 cm long, Camouflage stretch fabric, to wrap around your rifle. Doesn't leave any residue.
Black Texture ABS Body and Full Metal Receiver With Barrel. Power reach ~328FPS Velocity (Air Cocking), Magazine Accommodate 25+1 Rounds of 6mm Plastic Pellet, Airsoft WELL VSR-10 MB03 Bolt Action Spring Rifle Scope and bipod NOT INCLUDED. Please Choice separately from list below
Holographic Tactical 551 Dot Sight TAN, the best for two eyes open shooting and when you need speed and accuracy. Guarantees faster target acquisition and gives the operator greater zone control. Fits all standard Picatinny/Weaver rails.
Zoom: 3 - 9x * Diameter of exit lens: 40 mm* Diameter of enter lens: 35 mm* Length: 285 mm* Aiming instrument: lightened aiming net with cross* Aiming cross regulation: vertical and horizontal* Optic: glassSet include: scope 3-9x40E, lens cover.
Patch 3D PVC Evil smiley brown - Patch PVD with velcro at backside, airsoft - Dimension: 5 X 2,5 cm
For: v.2 and v.3 gearboxes Transfer: 13:1 Made of: Steel Weight: 70g Manufacturer: SHS
Comfortable tactical balaclava with one opening. Its design provides optimum protection and ventilation, ideal for wear both under the helmet and motorcycle or ski helmet. Made of high quality cotton with the addition of elastic Lycra, thanks to which it perfectly adapts to the shape of the user's head. Characteristics: - Retains its shape, flexibility...
The replica is made entirely from metal, with the exception of, naturally, grip panels and a magazine base that is made from ABS. In combination with excellently operating and powerfully “kicking” blow-back, it provides increased realism as well as influences significantly the durability of the construction
Purpose: M4 Replicas Material: Aluminium Length: 20.90mm Manufacturer: Cyma
Knight`s type short front grip designed for 22 mm RIS rail. Weight: 85 g Material: nylon Color: black Length: 95 mm
Great replica in scale 1: 1 of one of the most popular shotgun, used by civilians, police or military. The replica has been produced by CYMA specialy for the airsoft market. Just like in other replica from that producer, rifle has a reliable mechanism in this case a pump action system powered by a spring. This Shotgun is present in 2 category: low-budget...
Complete, assembled gearbox with the engine, trigger switch and wiring for P90 replicas. Dedicated to 60 cyma replicas. CAUTION! If you decide to personal installation gearbox parts as gears, pistons, springs, etc., you must remember that your warranty will be cancelled. Weight: 730 g
Made of plastic by a Taiwanese company HFC a replica of German compact pistol P8. Pistol is made of a high-quality composite that is reminiscent of the polymer used in the original. Slide is made of plastic with a smooth texture that imitates oxidized steel.
Polymer construction of hi-cap magazine for 300 BB's is very solid, light and durable. This magazine is compatible with the M4 serie replica from brand like CYMA, APS, Dboys, JG, A&K, which can be found on our website, it's also compatible with AEG in Tokyo Marui standard