The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Comfortable tactical balaclava with one opening. Its design provides optimum protection and ventilation, ideal for wear both under the helmet and motorcycle or ski helmet.
Made of high quality cotton with the addition of elastic Lycra, thanks to which it perfectly adapts to the shape of the user's head.
Characteristics:
- Retains its shape, flexibility and appearance even after long-term use
- Sewn from combed cotton (96%) and lycra (4%)
- No stitching at the height of face
- Sewn with triple flat seam
- Hole for eyes and bottom with a 10 mm trimming
- Manufactuerd in Poland
- Universal size
- One large eye opening
Color: OD Green
Standard CO2 12g capsule for CO2 gas replika. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
Made of durable nylon and high impact polymer. Mounted with hard rubber cap for extra impact protection. Adjustable velcro strap fits. Including carrying mesh bag.
Multiprocessor Charger with a Balancer Material: Metal + Polymer Weight: 530g Measurements: 135x145x35mm Manufacturer: Electro River™ NOTICE! Charges are covered only by starting warranty.
BIPOD Fit to AGM 002 APS2 L96 FOR SNIPER RIFLEMaterial: metalcolor: blackweight: 835 g
Weight: 320 g Magazine type: Green Gas Magazine capacity: 23 BBs Material: aluminum Color: black Length: 140 mm
DESCRIPTION A high-quality spring designed to improve performance in the replica. Made of high-quality, hardened steel. Can work with L96, TM models, such as : WELL MB4401, 02, 03, 06, 07, 08, 09. Outer diameter -11,6mm, internal diameter-8,1mm. CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must...
CYMA M9 (CM126)- Great Airsoft Electric Pistol - Primary CQB weapon- Include Battery & Charger
KJW designed replicas that can be powered by green gas or CO2, it`s depend which magazine type we use. Presented magazine can be powered only by green gas. Weight: 335 g Magazine type: Green Gas Magazine capacity: 30 BBs Material: aluminum Color: black
Charger for low-capacity batteries for AEP pistol replicas. Remember that it is not allowed to charge the battery placed in the replica! The battery fits the charger [IP-MICRO]
SHS M100 AEG Spring Material: Steel 100 m/s spring
M9A1 pistol replica was made mostly of metal. Only the pistol grip cover panels are made of plastic. The pistol grip is widened and rubberized what allows for a secure grip even if the shooter has got wet hands. There is a WE logo on the pistol grip.
Electric Pistol Great Starter Sidearm Fully Automatic Mode A non-blowback Airsoft 6mm BB Electric Pistol which is based upon some of the World's most popular pistols, with all of the best bits taken and combined to create one unique pistol which is highly ergonomic.
An universal multi-position stock for the AK type replicas is based on the M4 type replicas stock. The stock’s pipe is made of metal ( ZnAl ) and the tactical sling attachment point whiles as, on the other hand, the stock’s body is made of durable plastic. The stock’s foot is equipped with a porous surface thanks to which it is very stable. Dedicated to...
Combat knife 10inch made of 100% metal With a nylon handle Nylon cover included
35 MM AIRSOFT DOT SIGHT. Classic military styled dot sight available in two different sizes – 40mm and 45mm. All versions has insensitivity settings and the illuminated dot has both windage and elevation adjustment. Please note! Can looks slightly different, deepens of delivery! Red dot can come without flip side covers!
Comfortable tactical balaclava with one opening. Its design provides optimum protection and ventilation, ideal for wear both under the helmet and motorcycle or ski helmet.
Made of high quality cotton with the addition of elastic Lycra, thanks to which it perfectly adapts to the shape of the user's head.
Characteristics:
- Retains its shape, flexibility and appearance even after long-term use
- Sewn from combed cotton (96%) and lycra (4%)
- No stitching at the height of face
- Sewn with triple flat seam
- Hole for eyes and bottom with a 10 mm trimming
- Manufactuerd in Poland
- Universal size
- One large eye opening
Color: OD Green
![AEP BATTERY CHARGER [CYMA]](https://airsoftguns.ie/19561-home_default/aep-battery-charger-cyma-.jpg)
