The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 1kg
Price
Price
€0.00 - €165.00
Subcategories
There are 443 products.
Active filters
Multi-Function Automatic Airsoft Target System, Net and Support, Mechanical Automatic System, 3 Round Plastic Target and Paper Target.
Battery NiMH 1600mAh 10,V - stick type [8FIELDS] Accumulator type: NiMH Accumulator voltage: 10.8 V Accumulator capacitance: 1600 mAh Accumulator cells type: mini Accumulator connector type: small Tamiya NOTICE! Batteries are covered only by starting warranty.
This high-quality aluminum cylinder head with double o-rings is highly recommended for any modifications process. Made of Aluminium (Electroplate) Weight: 10 g Material: silicon rubber, aluminum
Weight: 120 g Material: aluminum Color: black Length: 196 mm Width: 32 mm The silencer have 14 mm counterclockwise thread.
- HIGH TORQUE long motor - Manufacturer CYMA - Fits to: series MP5, G3, M4, P90, M16, M15, SR4
Made of: brass Weight: 55g Diameter: 6,03mm Length: 247mm Manufacturer: PPS Airsoft, SHS
Set of 2.8x0.5 Flat Connectors [Female + Male]Two sets of flat connectors intended for installation in wiring or the motor of an AEG replica. The set includes 2 pairs of heat-shrink tubings.
The silencer have 14 mm counterclockwise thread. NOTE! Can be used as an extension of the barrel to mount longer inner/precision barrel. Weight: 120 g Material: aluminum Color: black Length: 196 mm Width: 32 mm
Weight: 170 gAccumulator type: NiMHAccumulator connector type: small TamiyaAccumulator cells type: miniAccumulator capacitance: 1600 mAhAccumulator voltage: 8,4 VNOTICE! Batteries are covered only by starting warranty.
The airsoft flash hider (compensator) have 14 mm counterclockwise thread.
G&G Green Hop Up Rubber (40 degree). The Hop-Up rubber was made of silicon thanks to which is keeps it properties even in low temperatures due to the fact that it does not get stiff just like in the case of regular rubber. It performs perfectly both in typical conditions as in negative temperatures – it keeps it properties even in the temperatures...
Color: black Material: polymer
Product Information Gear sector chip which fits the space better between sector gear and tappet plateBasically this upgrade part can enable the tappet plate (air nozzle) to delay it's releasing time Enables reliable BB Feeding in a modified high performance AEGEven though it is such small upgrade gearbox part, it will guarantee an AEG's reliable...
The silencer have 14mm counterclockwise thread. NOTE! Can be used as an extension of the barrel to mount longer inner/precision barrel. Weight: 115 g Material: aluminium Color: black Length: 110 mm Diameter: 35 mm
1.5X ZF-41 Scope with mount for Kar98 replicas Optical scope dedicated to the historical replica of the Kar98 rifle. The scope is made entirely of metal, with the exception of the covers for the adjustment knobs and the tightened viewfinder. The telescope has a dedicated assembly and a set of glass covers.
SHS Aluminum Air Seal Nozzle (long Type) -- 7075 Aluminum Construction -- For AK Series Airsoft AEG Rifle -- Purple Color
Tango Down Stubby Vertical Grip DE - Fit all 20mm RAS / RIS Rail / SIR System - Military Tactical RIS Short Grip for CQB purpose - Offer firm hold on your weapon during firing - This foregrip allow fast & accurate aiming onto your target
CNC Aluminum dummy silencer features a built-in tracer unit with a high power flash and ultra-sensitive motion sensor. Powered by 4x AAA batteries.Warning! When installing the batteries, make sure that the device is turned off and avoid touching sensitive electronic components - you will avoid short circuits and the risk of electric shock.
Airsoft Light Ergo Keymod Angled Fore Grip Ergo Keymod comfort grip Easy to install Designed for Keymod rails Length: 100 mm
The grip was made of durable plastic. It is mounted on a 22mm RIS rail and fits most of the replicas which are equipped with a RIS rail. There are flashlight pressure switch's attachment points located on the side of the replica. It can also be a placed to mount a laser target marker switch. Weight: 85g Made of: plastic Color: black Manufacturer: FMA...
![Battery NiMH 1600mAh 10.8V -stick type [8FIELDS]](https://airsoftguns.ie/4454-home_default/battery-nimh-1600mah-108v-stick-ak-type-8fields-.jpg)
