The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 3kg
Price
Price
€0.00 - €100.00
Subcategories
There are 229 products.
Active filters
Set of 2.8x0.5 Flat Connectors [Female + Male]Two sets of flat connectors intended for installation in wiring or the motor of an AEG replica. The set includes 2 pairs of heat-shrink tubings.
Polymer construction of hi-cap magazine for 300 BB's is very solid, light and durable. This magazine is compatible with the M4 serie replica from brand like CYMA, APS, Dboys, JG, A&K, which can be found on our website, it's also compatible with AEG in Tokyo Marui standard
Co2 version FULL METAL CONSTRUCTION Design for Gas Blow Back Pistol 24 Rounds Loading Capacity Suitable for KJ Works KP-01 E2 (P226)
CYMA 150rd Standard Magazine for AK AEG (C.71)
Battery NiMH 1600mAh 10,V - stick type [8FIELDS] Accumulator type: NiMH Accumulator voltage: 10.8 V Accumulator capacitance: 1600 mAh Accumulator cells type: mini Accumulator connector type: small Tamiya NOTICE! Batteries are covered only by starting warranty.
Name LiPo 7,4V 2000mAh 15/30C Cell Type LiPo Battery Capacity [mAh] 2000 Battery Voltage [V] 7,4 Plug Type Tamiya small Battery size [mm] 10x21x126 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Weight: 70 g Accumulator type: metal Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 1200 mAh Length: 175 mm Width: 14 mm Accumulator voltage: 11.1 V Height: 15 mm
During charging LiPo battery needs to be remembered: * Use ONLY a charger approved for lithium batteries. * Charging each time using the balancer is advisable. It is preferable to use it at least every 5 cycles of loading. * DO NOT leave battery without supervision when it is charging. * DO NOT use broken cells. * Avoid prolonged charging, it can cause...
Magazine with a capacity of 30 BBs dedicated to [M1 Garand] replicas by PJ, AK. It does not fit the ICS replica. Low-cap magazines must be prepared in particular way before first usage. Steps that must be made: · during first usage, magazine MUST NOT be fully loaded with bb's, · before first usage, magazine SHOULD be oiled with silicon oil for better...
Quick and easy to use charger with balancer. After connection to power one of three LED s will flask. When charging is completed the one of three LED s will light constant. NOTICE! -Charges are covered only by starting warranty. - Can be yellow or blue (pictures)
The long-awaited Li-Po battery dedicated to electric pistols. Its significantly improves the response to trigger pull -replica comes alive! The battery fits without any modifications in the replica, its charging is detached using chargers for Li-Po batteries. For charging, use only chargers dedicated for li-po batteries. The battery is connected to the...
Magazine with space for CO2 cartridge dedicated to replica KP-13 KJW. Weight: 280 g Magazine type: CO2 Magazine model: low-cap Material: aluminum Color: black Magazine capacity BBs: 22
AEG Heatshrinks set contains 21 heatshrink tubes, all 9 cm [3,5 inch] long.
TITAN V2 Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced or Complete set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require...
Battery 8.4V 1600 mAh New technologies have been developed in Ni-MH batteries, thanks to which higher efficiency and high voltage can be obtained. Ni-MH batteries form groups of batteries that are powerful, energy density, which is why at the same performance they have a greater capacity than batteries made in higher technologies. The package made of...
Multiprocessor Charger with a Balancer Material: Metal + Polymer Weight: 530g Measurements: 135x145x35mm Manufacturer: Electro River™ NOTICE! Charges are covered only by starting warranty.
LiPo 7.4V 1200 mAh 25/50C Battery Electro River™ is a new quality on the LiPo battery pack market. The manufacturer has set for himself a goal to create a product whose quality will match even the best players on the market of batteries whilst at the same time retaining an attractive price. The offer includes high capacity packs designed with limited...
This modern microprocessor charger is designed for NiMH and NiCD batteries. Suitable for batteries with the number of cells from 1 to 8.It recognizes the battery status and automatically stops the charging process when the battery is full. NOTICE! Charges are covered only by starting warranty.
Presented magazine can be powered only by green gas. Weight: 165 g Color: black Material: aluminum Magazine type: Green Gas Length: 117 mm Magazine capacity: 11 BBs
HFC magazine for: *HG-192 *HG-194 *HG-199 Presented magazine can be powered only by green gas. Weight: 280 g Magazine capacity: 23 BBs Material: aluminum Color: black
![Battery NiMH 1600mAh 10.8V -stick type [8FIELDS]](https://airsoftguns.ie/4454-home_default/battery-nimh-1600mah-108v-stick-ak-type-8fields-.jpg)
![C02 MAGAZINE FOR KP-13 [KJW]](https://airsoftguns.ie/18904-home_default/c02-magazine-for-kp-13-kjw-.jpg)
