The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
DESCRIPTION
A Rifle of the well-known Belgian PDW FN Herstal P90 submachine gun produced in Fabrique Nationale in the Belgian city of Liege which is famous for the production of weapons and great chocolates.
Due to the compact design, this gun is used by security guards, drivers, and vehicle crews, as well as by special forces and anti-terrorist groups in hostage rescue operations and CQB. Currently, it is used in the military and police forces in over 50 countries, including the Belgian Navy, French GIGN Elite Tactical Unit, Italian Army Special Forces, Royal Netherlands Army, Polish GROM Military Unit, Portuguese GOE Tactical Police Unit or Spanish GEO and American SWAT Teams.
Please note!
The set does not include a battery or a charger.
Replica came with FN HERSTAL markings!
A Rifle of the well-known Belgian PDW FN
Herstal P90 submachine gun produced in Fabrique Nationale in the Belgian city of Liege which is famous for the production of weapons and great chocolates.
Compact construction
Due to the compact design, this gun is used by security guards, drivers, and vehicle crews, as well as by special forces and anti-terrorist groups in hostage rescue operations and CQB. Currently, it is used in the military and police forces in over 50 countries, including the Belgian Navy, French GIGN Elite Tactical Unit, Italian Army Special Forces, Royal Netherlands Army, Polish GROM Military Unit, Portuguese GOE Tactical Police Unit or Spanish GEO and American SWAT Teams.
Faithful replica of the original
Cyma submachine gun manufactured according to the original under the Cybergun license, which gives the possibility to have a full marking rifle. It has a modern futuristic look with a thumb hole in the body that acts as a pistol grip and an enlarged trigger guard that acts as a foregrip for the support hand, which provides better mobility and control of the weapon. The design is fully ambidextrous with a charging handle, a magazine release, a selective fire selector (Safe, Single, Auto), and a top-mounted magazine. The FN P90 is equipped with 3 Picatinny mount rails for [red dot sights, laser sights, or [tactical flashlights. The muzzle device can be detached to mount an airsoft silencer or airsoft glow-in-the-dark tracer units for a 14mm CCW thread barrel. Additionally, in the rear part of the body, there is a place for a one-point sling for better transport.
Similarly to the original firearm, the airsoft manufacturer used polymers for the production of the PDW to reduce the weight (total 2.45kg) and price of the pistol.
The internal mechanism is a metal V.6 gearbox with a quick spring change system (without removing the gearbox from the body, access through the buttplate), steel gears mounted on 8mm bearings, a rotary hop-up chamber and a 260mm long barrel with a diameter of 6.03mm. Standard power of ~328fps.
Hop up: adjustable
Weight: 2080 g
Magazine model: polymer
Bearings type: steel sliding
Gearbox version: v.6
Bearings diameter: 8 mm
Magazine model: low-cap
Accumulator type: NiMH
Muzzle velocity :~328 fps
Accumulator type: cube
Accumulator connector type: small Tamiya
Accumulator included in set: NO
Diameter of Internal barrel: 6,03 mm
Magazine capacity: 68 BBs
Material: aluminum, polymer
Color: black
Length: 500 mm
Muzzle energy: ~1J
Length of internal barrel mm : 260
Fire mode: auto, single
Inner barrel length mm: 260
The set includes:
· FN Herstal P90 SMG (Triple Rail) Tactical
· 68 rd magazine
· Speedloader
Please note!
The set does not include a battery or a charger.
Replica came with FN HERSTAL markings!
NOTE! Every replica pass initial check-up. It's being checked and overshooted on XCORTECH X3200 chronograph.
Introducing a sturdy recreation of the Submachine Gun MK7 by S&T, a formidable counterpart to the renowned Sten, further establishing its status as an iconic weapon in the British armed forces. Crafted from stamped steel, this firearm is a specialized model within the Sterling SMG family. The Sterling Mk.7 is essentially a modified version of the...
DESCRIPTION Thoroughly and carefully made replica of P90. The body is made from the polymer. The replica has three metal Picatinny rail allowing mounting of tactical accessories (optics, flashlights, laser sights). The mechanism is a dedicated metal gearbox v.6 with steel-sliding bearings 6mm, cylinder type 1, reinforced piston with aluminum sleeve,...
It's a replica of the newest series of Arcturus LITE, in which the upper and lower receivers were made of durable nylon. Thanks to the nylon body, the weight and the price of the replica were reduced. Using the nylon, the replica did not lose its strength, because the socket of the receiver extension tube and a barrel socket with a thread for the...
Introducing a robust reproduction of the Submachine Gun MK5 by [S&T], a formidable counterpart to the renowned Sten, solidifying its status as an iconic weapon in the British armed forces. Constructed from stamped steel, this firearm underwent rigorous trials as a potential successor to the Sten in early 1944 and swiftly earned its place among...
Set included: * replica with silencer (1 month warranty) * hi-cap magazine * battery 7,2V, 500 mAh with starting warranty * charger with starting warranty
The Sten 058 MK II SMG by [AGM] resurrects a significant chapter of world history. The Sten, a submachine gun utilized by the British Army during World War II, is notable for its straightforward yet sturdy design. This firearm was developed to rapidly replenish the British Army's substantial equipment losses following the evacuation from Dunkirk, employ...
JG069MG submachine gun replica The replica's components are made from plastics and metal. The stock rail, front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Adjustable length of the stock allows the user to adapt the replica to his or hers physique and...
JG067MG submachine gun replica The replica"s components are made from plastics and metal. The stock rail, front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Adjustable length of the stock allows the user to adapt the replica to his or hers physique and...
Weight: 40 g Material: aluminum, steel Color: black
CM.051 is a replica of a submachine gun made famous in the days of Prohibition-era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. The buttstock, pistol grip, and foregrip are stylized on wood made of plastic. Magazine, receiver, frame group, bolt, bolt handle, safety, trigger, magazine...
CM.041 SD6 is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal...
CM.033 is a replica of submachine gun made famous in the days of Prohibition era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. Butt stock, rear grip, and fore grip is stylized on wood made of plastic. Magazine, frame group, bolt, barrel and receiver are made of metal.
CM.041 is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper,...
CM.041B is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper,...
A replica of the legendary American sub-machinegun, the so called grease gun which is made by the Snow Wolf company. It is a great opportunity for those who love military items from the period of the II World War. The replica’s body was made of steel when as the barrel and other minor elements are made of an alloy of zinc and aluminum. The Grease Gun is...
AGM MP007 is an airsoft replica of the iconic German submachine gun, the MP40, from the World War II era. Produced by AGM, this replica is meticulously crafted, staying true to the original, including the foldable metal stock. All the metal components of the original firearm have been precisely reproduced in this replica. PLEASE NOTE!!! Battery and...
DESCRIPTION
A Rifle of the well-known Belgian PDW FN Herstal P90 submachine gun produced in Fabrique Nationale in the Belgian city of Liege which is famous for the production of weapons and great chocolates.
Due to the compact design, this gun is used by security guards, drivers, and vehicle crews, as well as by special forces and anti-terrorist groups in hostage rescue operations and CQB. Currently, it is used in the military and police forces in over 50 countries, including the Belgian Navy, French GIGN Elite Tactical Unit, Italian Army Special Forces, Royal Netherlands Army, Polish GROM Military Unit, Portuguese GOE Tactical Police Unit or Spanish GEO and American SWAT Teams.
Please note!
The set does not include a battery or a charger.
Replica came with FN HERSTAL markings!
![P90 CM.060B SMG [CYMA]](https://airsoftguns.ie/14876-home_default/p90-cm060b-smg-cyma-.jpg)
![MAC 11 JG0452 [WORKS J.G.]...](https://airsoftguns.ie/10692-home_default/mac-11-jg0452-works-jg-smg-airsoft.jpg)
