
Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
CM.041B is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers.
It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper, outer barrel, sights, suppressor, stock - ZnAl). the stock foot and the lower receiver are very precisely made, the material from which they are made is nylon (the same material as used for the production of parts in real weapons). The replica has a removable flame suppressor, and possibility to mount dummy suppressor - 14 mm counterclockwise thread.
CM.041B is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers.
It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper, outer barrel, sights, suppressor, stock - ZnAl). the stock foot and the lower receiver are very precisely made, the material from which they are made is nylon (the same material as used for the production of parts in real weapons). The replica has a removable flame suppressor, and possibility to mount dummy suppressor - 14 mm counterclockwise thread
Inside there is a reinforced ver.2 gearbox, steel gears are mounted on reinforced 7mm bearings.
The spring guide is reinforced (metal) together with the bearing (note: guides v.3 are used), which makes the spring work easier.
Polymer piston has metal teeth and the cylinder - type "1" - was covered with black nickel "SMOKED" on the copper substrate providing perfect smoothness of the surface.
A huge advantage is the silent piston and cylinder head set, made of aluminum and covered with a blue anode,the piston head has bearing.
The replica has a powerful engine with increased torque equipped with neodymium magnets.
The way how gearbox is functioning will surprise a user. It is also worth adding that the model is fully compatible with parts and accessories of other manufacturers, which is important for all types of modifications.
Weight: 2815 g
Magazine model: steel
Bearings type: steel sliding
Gearbox version: v.2
Bearings diameter: 7 mm
Accumulator type: NiMH
Muzzle velocity: ~328fps
Accumulator type: cube
Accumulator connector type: small Tamiya
Accumulator cells type: mini
Accumulator included in set: YES
Diameter of Internal barrel: 6,03 mm
Magazine capacity: 200 BBs
Accumulator capacitance: 1200 mAh
Material: aluminum, nylon
Color: black
Length: 740 mm
Accumulator voltage: 8,4 V
Muzzle energy: ~1J
Length of internal barrel: 220 mm
Fire mode: auto, single
Set includes:
* replica
* accumulator mini 8,4V 1200mAh
* charger
* magazine Hi cap 200 rd
* Handle Grip
Every replica pass initial check up. It`s being checked and overshooted on XCORTECH X3200 chronograph.
9.6V NiMH is recommended, and in the case of Li-Po / Li-Ion - 7.4V.
Otherwise, the replica may be damaged, which will not be covered by warranty repair!
Remember that the warranty covers only replicas in which the spring was not replaced with a stronger one, and no batteries with a higher voltage than recommended were used.
NOTICE! Replica have a unique serial number!
JG067MG submachine gun replica The replica"s components are made from plastics and metal. The stock rail, front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Adjustable length of the stock allows the user to adapt the replica to his or hers physique and...
The replica's components are made from plastics and metal. Front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Small size of the replica makes it perfect for operations in urban areas and in small, confined spaces. The battery is located inside the fixed...
CM.041 is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper,...
Set included: * replica with silencer (1 month warranty) * hi-cap magazine * battery 7,2V, 500 mAh with starting warranty * charger with starting warranty
The JG-0451 airsoft AEG gun is modelled on the famous Czechoslovakian made V61 Skorpion SMG or sub machine gun. The very solidly made replica has a mechanism specially constructed for this model inside that allows receiving 260 fps. The replica's parameters make it an ideal submachine gun for conducting safe games in CQB. Elements such as the stock,...
Set includes * replica * charger * magazine low cap 50rd
The replica's components are made from plastics and metal. The stock rail, front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Adjustable length of the stock allows the user to adapt the replica to his or hers physique and preferences. Small size of the...
JG069MG submachine gun replica The replica's components are made from plastics and metal. The stock rail, front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Adjustable length of the stock allows the user to adapt the replica to his or hers physique and...
JG067MG submachine gun replica The replica"s components are made from plastics and metal. The stock rail, front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Adjustable length of the stock allows the user to adapt the replica to his or hers physique and...
A replica of the legendary American sub-machinegun, the so called grease gun which is made by the Snow Wolf company. It is a great opportunity for those who love military items from the period of the II World War. The replica’s body was made of steel when as the barrel and other minor elements are made of an alloy of zinc and aluminum. The Grease Gun is...
The body are made of plastic, similar to the real firearm, while the reloading handle assembly and RIS rail barrels are made of metal. The replica is perfectly balanced thanks to the construction in the bullpup standard, it retains small dimensions and great maneuverability. This makes the replica perfect for short, medium and long range games. Please...
Classic English sub machine gun immortalized by its action during the Second World War, where the British commando forces and resistance forces in occupied Europe, benefitted from its simple but efficient construction.
DESCRIPTION Thoroughly and carefully made replica of P90. The body is made from the polymer. The replica has three metal Picatinny rail allowing mounting of tactical accessories (optics, flashlights, laser sights). The mechanism is a dedicated metal gearbox v.6 with steel-sliding bearings 6mm, cylinder type 1, reinforced piston with aluminum sleeve,...
Weight: 40 g Material: aluminum, steel Color: black
CM.041J is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper,...
Set includes * replica * charger * magazine low cap 50rd
CM.041B is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers.
It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper, outer barrel, sights, suppressor, stock - ZnAl). the stock foot and the lower receiver are very precisely made, the material from which they are made is nylon (the same material as used for the production of parts in real weapons). The replica has a removable flame suppressor, and possibility to mount dummy suppressor - 14 mm counterclockwise thread.