Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Airsoft is a competitive team sport in which participants eliminate opponents by shooting each other with spherical plastic pellets launched via replica weapons called airsoft guns. Airsoft is commonly compared to paintball, which is a recreational shooting sport similar in concept but with some key differences.
Subcategories
There are 236 products.
Active filters
WELL L96 Bolt Action Spring Rifle, Replica of Maruzen APS Type 96 Bolt Action Sniper Rifle, Full Metal Bolt System & Solid cocking motion sound, Soft Rubber Stock made it to be ultimate rifle for comfort & accuracy . Please note!!! May have some marks/scratches/missing/damage box! Scope and bipod NOT INCLUDED. Please Choice separately from list...
120RD GREEN GAS GRENADE
Shells For Spring Powered Shotgun, 6 PC, 30rd's per shell Please note!!! THE SHELLS CAN BE ONLY ONE COLOR - RED
This Short Grenade Launcher is made of aluminium, is lightweight and very durable. Can be mount on every replica, using standard RIS rail. This launcher can work with grenades shells that are 8 cm long. The use of it is very easy and fast. It is great for CQB.
A small 7.2V 500mAh. battery for electric airsoft handguns like G18C, CZ99 and STI Classic, also it fit CYMA electric pistols. CM030, CM121, CM122, CM123, CM125, CM126 NOTICE! Batteries are covered only by starting warranty.
Enlarged magazine for the Cyma 132S/126 electric pistol, holds 80 bb's.
Enlarged magazine for the Cyma 132S/126 electric pistol, holds 80 bb's.
The grenade’s diameter is 40mm and it is made of metal. The green gas grenade is designed to be used with the grenade launcher having the inner diameter of 40mm. The grenade is powered by green-gas. It holds 84 BB pellets.
Weight: 625 g Material: nylon Color: black Length: 320 mm Width: 250 mm Height: 65 mm
The grenade’s diameter is 40mm and it is made of metal. The green gas grenade is designed to be used with the grenade launcher having the inner diameter of 40mm. The grenade is powered by green-gas. It holds 96 BB pellets.
Charger for low-capacity batteries for AEP pistol replicas. After the battery is charged, the landing process will automatically stop. Thus, the battery is protected against damage. Remember that it is not allowed to charge the battery placed in the replica! The battery fits the charger [IP-MICRO]
The long-awaited Li-Po battery dedicated to electric pistols equipped with a small Deans connector. For charging, use only chargers dedicated for li-po batteries. The battery is connected to the charger through the balancer port. Suitable for replicas such as CM.132S, CM.121S, CM.123S, CM125S and similar equipped with a small Deans connector. Does not...
The long-awaited Li-Po battery dedicated to electric pistols. Its significantly improves the response to trigger pull -replica comes alive! The battery fits without any modifications in the replica, its charging is detached using chargers for Li-Po batteries. For charging, use only chargers dedicated for li-po batteries. The battery is connected to the...
Great replica in scale 1:1 of one of the most popular shotgun, used by civilians, police or military. The replica has been produced by Double Eagle specialy for the airsoft market. Just like in other replica from that producer, rifle has a reliable mechanism in this case a pump action system powered by a spring. In the set with replica you have a magazine...
The ST 200 was purposefully crafted to be an unparalleled force on the battlefield, excelling at extended ranges due to a new caliber .408. Its design revolves around empowering modern warfighters with the capability to unleash devastatingly accurate firepower over long distances. The ST 200's exceptional performance has catapulted it to the heights of...
Replica of the new series of AK assault rifles, these rifles are produced in many specifications that include civil or military. Receiver, receiver cover, external barrel, safety lever, rear sight base, trigger, gas port block, gas cylinder, bolt carrier, front sight base and muzzle brake are made of steel and aluminium, that made the replica is more...
PKM machinegun replica The long awaited model of the universal PKM machinegun made by the A&K company was made of steel and aluminum. The bolt chamber, the chamber cover, the bipod, the carrying handle and the box magazine were made of steel, while as the rest of the elements, such as the outer barrel, the base of the front iron aiming sight, the gas...
The CM company"s CM042A is another modified version of the legendary AK carbine The replica was made of metal elements and ABS. The profiled pistol grip, the tactical grip, the stock and the front grip with the magazine are made of plastic. The barrel, the body, the iron aiming sights, the trigger and the trigger guard are made of metal.
battery with charger inc. The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped with metal...
It's a replica of the newest series of Arcturus LITE, in which the upper and lower receivers were made of durable nylon. Thanks to the nylon body, the weight and the price of the replica were reduced. Using the nylon, the replica did not lose its strength, because the socket of the receiver extension tube and a barrel socket with a thread for the...