Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
There are 1251 products.
Magazine pouch can hold 7.62 / .308 style magazines (HK417 / G3 / SR25 / M14 / AK47 / FAL / SCAR-H / SSR) and 5.56 / .223 (G36) or many other accessories. Compatible with all MOLLE platforms. Weight: 220 g Material: 600D polyester
Fast 502 is a flashlight that can handle everything. It is ideal for tactical applications, and its made of aero grade 6061-T6 aluminum - it will not surrender even in the most difficult conditions. The torch generates light of 800 lumens, which in the hardest conditions can decide on the success of the mission. It is equipped with control on the cable,...
M9A1 v.2 pistol replica by WE patterened on the most popular Italian pistol. The replica was performed with great accuracy and attention paid to details. The slide, the frame and the magazine were made of metal, whereas only grip covers, as in the real steel, were made of plastic. The covers are removable and have scrabrous non-slip texture. The...
Igniter for Thunder B sound grenades for CO2 capsules. Weight: 160 g Material: metal, steel, polymer
The latest version of the popular CYMA AEP electric pistols. However, this time, despite the unchanged appearance, we have an absolute novelty inside. The replica has a MOSFET system, detachable Li-Po battery, low-resistance waring and the gearbox itself has steel ball bearings and the plastic parts are made of blue, durable polymer. Durable steel gears...
Deposit for pre-orders.
Bite Valve Cover keeps Bite Valve clean from dirt and debris. This 2.5L Reservoir is perfect for upgrade or replacement of your current reservoir. Huge Omega Access Port make filling & cleaning a simple task, while still deliver a solid & secure seal.
Gear sector clips are used to prevent “empty shooting” and is primarily used with high-speed tunings (25+ rounds/sec.). 1 piece.
Tactical cap A cap made from mix of polyester and cotton, granting it a good compromise between durability and breathability. A classic, comfortable design makes the cap an universal head cover, perfect in both everyday and airsoft use. The material used has rip-stop structure. This guarantees high resistance to mechanical damages. The size is universal –...
Tango Down Stubby Vertical Grip DE - Fit all 20mm RAS / RIS Rail / SIR System - Military Tactical RIS Short Grip for CQB purpose - Offer firm hold on your weapon during firing - This foregrip allow fast & accurate aiming onto your target
BOL Battery Wire Connector for airsoft AEG rifles tamiay "large" - For Remote Control & AEG -
Patch 3D PVC Evil smiley "with face" - Patch PVD with velcro at backside, airsoft - Dimension: 5 X 2,5 cm
Patch 3D PVC big nightmare smiley - Patch PVC with velcro at backside - shines at night (iluminascence)
Patch PVD with velcro at backsideDimension: 5 X 2,5 cm
Weight: 5 g Material: steel code BD1077
WARFET is GATE’s most advanced AEG Control System. It has 20 functions and almost 6 million possible configurations. The outstanding Tactical Programming Card provides you with very easy access to the WARFET Power Module settings. SUPER-EASY INSTALLATION - JUST PLUG&PLAY, NO SOLDERING REQUIRED
Case Qty: 6 pcs Weight: 1600 g Material: 600D polyester Length: 900 mm Width: 65 mm Camouflage: woodland Height: 340 mm
Material: 600D polyester Color: olive Package quantity: 1 pcs. Width: 85 mm Camouflage: multicamo Height: 130 mm
Switch V.2 NB0027 A basic replacement of the trigger block - this piece consists of just the sliding contact & the trigger contact block; there is no wiring included. This is only for V2 gearboxes e.g. MP5, M4, M16 etc.
G27 style profiled pistol grip for M4/M16 series - coyote. Bottom motor plate is not included.